SIST EN 14041:2005/AC:2007

Resilient, textile and laminate floor coverings - Essential characteristics

EC - Footnote added to 4.3

Elastische, textile Bodenbeläge und Laminatböden - Wesentliche Eigenschaften

Revetements de sol résilients, textiles et stratifiés - Caractéristiques essentielles

Netekstilne, tekstilne in laminirane talne obloge - Bistvene značilnosti

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2006
• Withdrawal Date: 28-Jan-2018
• ICS: 97.150 - Floor coverings
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 26-Jan-2018
• Due Date: 18-Feb-2018
• Completion Date: 29-Jan-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: EN 14041:2004/AC:2006 - Resilient, textile and laminate floor coverings - Essential characteristics

Relations

• Replaced By: SIST EN 14041:2018 - Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics
• Effective Date: 01-Apr-2018
• Corrects: SIST EN 14041:2005 - Resilient, textile and laminate floor coverings - Essential characteristics
• Effective Date: 22-Dec-2008
• Replaces: SIST EN 14041:2005/AC:2005 - Resilient, textile and laminate floor coverings - Essential characteristics
• Effective Date: 22-Dec-2008
• Corrects: SIST EN 14041:2005 - Resilient, textile and laminate floor coverings - Essential characteristics
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Resilient, textile and laminate floor coverings - Essential characteristicsLOQRVWLRevetements de sol résilients, textiles et stratifiés - Caractéristiques essentiellesElastische, textile Bodenbeläge und Laminatböden - Wesentliche EigenschaftenTa slovenski standard je istoveten z:EN 14041:2004/AC:2006SIST EN 14041:2005/AC:2007en,fr,de97.150Netekstilne talne oblogeNon-textile floor coverings59.080.60Tekstilne talne oblogeTextile floor coveringsICS:SLOVENSKI
STANDARDSIST EN 14041:2005/AC:200701-januar-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14041:2004/ACOctober 2006Octobre 2006Oktober 2006ICS 59.080.60; 97.150English versionVersion FrançaiseDeutsche FassungResilient, textile and laminate floor coverings - Essential characteristicsRevêtements de sol résilients, textiles etstratifiés - Caractéristiques essentiellesElastische, textile Bodenbeläge undLaminatböden - Wesentliche EigenschaftenThis corrigendum becomes effective on 18 October 2006 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 18 octobre 2006 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 18.Oktober 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 14041:2004/AC:2006 D/E/F



EN 14041:2004/AC:2006 (E/F/D)
2 English version
4.2 Content of pentachlorophenol (PCP)1 Resilient, textile and laminate floor coverings shall not contain PCP or a derivative thereof as a component in the production process of the product or of its raw materials. In cases where verification is required, if the content is less than 0,1 % by mass by the method of Annex B, this requirement shall be considered to be met.
Should be changed into the text below
4.2 Content of pentachlorophenol (PCP)1 Resilient, textile and laminate floor coverings shall not contain PCP or a derivative thereof as a component in the production process of the product or of its raw materials. In cases where verification is required, if the content is less than 5 ppm in the parts of the product affected by treatment, this requirement shall be considered to be met. For laminate floor coverings the method CEN/TR 148232, for textile floor coverings the method CEN/TS 144943 shall be used. For resilient floor coverings verification is not required.
Replace the first paragraph of ZA.2.1 with the following text: "The systems of attestation of conformity for resilient, textile and laminate floor coverings indicated in Table ZA.1, in accordance with the Decision of the Commission 97/808/EC of 03/12/1997 as given in Annex III of the mandate for "Floorings", are shown in Table ZA.2 for the indicated intended uses and relevant classes." Replace the Table ZA.2 as follows: Table ZA.2 – Systems of attestation of conformity Product Intended use(s)
Level(s) or class(es) Attestation of conformity system
Resilient, textile and laminate floor coverings
Internal and external use as flooring coverings A1fl*, A2 fl *, B fl * and C fl * A1 fl **, A2 fl **, B fl **, C fl **, D fl and E fl (A1 fl to E fl)*** and F fl 1 3 4 *
Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
In accordance with EC decision 2001/596EC products with a different content of organic material outside the accepted limits as laid down in the factory production control documentation have to be tested separately according to table D1 in Annex D.
**
Products/materials not covered by footnote (*). ***
Products/materials that do not require to be tested for reaction to fire (e.g. products/materials of Class A1
according to Commission Decision 96/603/EC, as amended).
This applies also to products that are covered by a CWFT (classified without further testing) decision. System 1: See Directive 89/106/EEC (CPD) Annex III.2.(i), without audit testing of samples. System 3: See Directive 89/106/EEC (CPD) Annex III.2.(ii), Second possibility. System 4: See Directive 89/106/EEC (CPD) Annex III.2.(ii), Third possibility.
1 Attention is drawn to Commission Directive 1999/51/EC that covers restrictions on the marketing and use of certain dangerous substances including PCP and is reflected in national regulations 2 CEN/TR 14823:2003: Durability of wood and wood-based products; Quantitative determination of pentachlorophenol in wood - Gas chromatographic method. 3 CEN/TS 14494:2003: Leather — Chemical tests — Determination of pentachlorophenol content.



EN 14041:2004/AC:2006 (E/F/D) 3
The attestation of conformity of the floor coverings in Table ZA.1 shall be based on the evaluation of conformity procedures indicated in Tables ZA.3 to ZA.5 resulting from application of the clauses of this European Standard indicated therein.
Add footnote to Clause 4.3
4.3 Formaldehyde emission4 When formaldehyde-containing materials have been added to the product as a part of the production process, the product shall be tested and classified into one of two classes: E1 or E2, as specified in Table 4 and Table 5.
4 products CE marked according to this standard emitting formaldehyde above classE1 might be prohibited in some Member States



EN 14041:2004/AC:2006 (E/F/D)
4
Version française Le paragraphe suivant : 4.2 Teneur en pentachlorophenol (PCP)1 Les revêtements de sol résilients, textiles et stratifiés ne doivent pas contenir de PCP ou un de ces dérivés comme composant dans le processus de production du produit ou de ses matières premières. Dans les cas où une vérification est exigée, si la teneur en PCP obtenue par la méthode de l’Annexe B, est inférieure à 0,1 % en masse, cette exigence doit être considérée comme étant satisfaite.
Doit être remplacé par :
4.2 Teneur en pentachlorophenol (PCP) 1 Les revêtements de sol résilients, textiles et stratifiés ne doivent pas contenir de PCP ou un de ces dérivés comme composant dans le processus de production du produit ou de ses matières premières. Dans les cas où une vérification est exigée, si la teneur en PCP est inférieure à 5 ppm dans les parties du produit concernées par le traitement, cette exigence doit être considérée comme étant satisfaite. Pour les revêtements de sol stratifiés, la méthode décrite dans le CEN/TR 148232 doit être utilisée. Pour les revêtements de sol textiles, la méthode décrite dans le CEN/TS 144943.
Remplacer le premier alinéa du paragraphe ZA.2.1 par le texte suivant :
Les systèmes d’attestation de conformité des revêtements de sol résilients, textiles et stratifiés mentionnés dans le Tableau ZA.1, conformément à la Décision de la Commission 97/808/CE du 03/12/1997 donnée à l’Annexe III du mandat concernant les "Revêtements de sol", sont présentés au Tableau ZA.2 pour les usages prévus et le
...