SIST EN 304 220-2 V1.2.1:2024
(Main)Wideband data transmission SRD - Harmonised Standard for access to radio spectrum - Part 2: Wideband data transmission devices: terminal node operating in the frequency bands 863 MHz to 868 MHz and 915,8 MHz to 919,4 MHz
Wideband data transmission SRD - Harmonised Standard for access to radio spectrum - Part 2: Wideband data transmission devices: terminal node operating in the frequency bands 863 MHz to 868 MHz and 915,8 MHz to 919,4 MHz
The present document specifies technical characteristics and test methods to be used in the conformance assessment of
wideband data transmission Short Range Device (SRD) terminal node equipment in the frequency range 863 MHz to
868 MHz and 915,8 MHz to 919,4 MHz. The wideband data transmission device category covers radio devices that use
wideband modulation techniques to access the spectrum. The present document specifies technical characteristics and
methods of measurements for equipment operated in the following designated frequency bands given in Table 1-1.
In the designated bands the following types of equipment are defined:
Type 1: Wideband Data Transmission Terminal Node (TN) in data networks in 863,0 MHz to 868,0 MHz.
Type 2: Wideband Data Transmission Terminal Node (TN) in data network in 915,8 MHz to 919,4 MHz and in
917,4 MHz to 919,4 MHz:
1) Type 2a: Nomadic Terminal Node (TN) of Type 2 or Mobile Terminal Node (TN) of Type 2.
NOTE 1: The availability of the frequency bands for type 2 equipment in the European Union and CEPT countries
can be obtained from EFIS (https://efis.cept.org/) and is also listed in Appendices 1 and 3 of
CEPT/ERC/REC 70 03 [i.2].
In addition, it should be noted that, in some countries, part or all of the bands for type 2 equipment may
be unavailable, and/or other frequency bands may be available, for networked and/or network based short
range devices. See National Radio Interfaces (NRI) as relevant for additional guidance.
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given annex A.
Širokopasovni sistemi za prenos podatkov SRD - Harmonizirani standard za dostop do radijskega spektra - 2. del: Širokopasovne naprave za prenos podatkov: terminalsko vozlišče, ki deluje v frekvenčnih pasovih od 863 MHz do 868 MHz in od 915,8 MHz do 919,4 MHz
Ta dokument določa tehnične lastnosti in preskusne metode za ocenjevanje skladnosti terminalskih vozlišč širokopasovnih sistemov za prenos podatkov SRD v frekvenčnem območju od 863 MHz do 868 MHz in od 915,8 MHz do 919,4 MHz. Kategorija širokopasovnih sistemov za prenos podatkov zajema radijske naprave, ki za dostop do spektra uporabljajo tehnike širokopasovne modulacije. Ta dokument določa tehnične lastnosti in merilne metode za opremo, ki deluje v določenih frekvenčnih pasovih, podanih v preglednici 1-1.
V določenih pasovih so opredeljene naslednje vrste opreme:
tip 1: terminalsko vozlišče (TN) za širokopasovni dostop podatkov v podatkovnih omrežjih s frekvenco od 863,0 Mhz do 868,0 MHz;
tip 2: terminalsko vozlišče za širokopasovni dostop podatkov v podatkovnih omrežjih s frekvenco od 915,8 MHz do 919,4 MHz in od 917,4 MHz do 919,4 MHz:
1) tip 2a: nomadsko terminalsko vozlišče tipa 2 ali mobilno terminalsko vozlišče tipa 2.
OPOMBA 1: Razpoložljivost frekvenčnih pasov za opremo tipa 2 v državah Evropske unije in CEPT je mogoče pridobiti iz sistema obveščanja o frekvencah (EFIS – https://efis.cept.org/) ter je prav tako navedena v dodatkih 1 in 3 dokumenta
CEPT/ERC/REC 70-03 [i.2].
V nekaterih državah pasovi za opremo tipa 2 morda v celoti ali delno
niso na voljo in/ali so lahko za omrežne naprave kratkega dosega in/ali naprave kratkega dosega, ki temeljijo na omrežju, na voljo drugi frekvenčni pasovi. Za dodatne smernice glej nacionalne radijske vmesnike (NRI).
OPOMBA 2: Razmerje med tem dokumentom in bistvenimi zahtevami člena 3.2 Direktive 2014/53/EU [i.1] je podano v dodatku A.
General Information
Buy Standard
Standards Content (Sample)
Draft ETSI EN 304 220-2 V1.1.0 (2022-09)
HARMONISED EUROPEAN STANDARD
Wideband data transmission SRD operating in
the frequency range 25 MHz to 1 000 MHz;
Harmonised Standard for access to radio spectrum;
Part 2: Wideband data transmission devices:
terminal node operating in designated bands
2 Draft ETSI EN 304 220-2 V1.1.0 (2022-09)
Reference
DEN/ERM-TG28-557
Keywords
harmonised standard, SRD
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
3 Draft ETSI EN 304 220-2 V1.1.0 (2022-09)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 General performance criteria . 15
4.3 Requirements for transmitters . 16
4.3.1 Frequency error . 16
4.3.1.1 Applicability. 16
4.3.1.2 Description . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 Effective radiated power . 16
4.3.2.1 Applicability. 16
4.3.2.2 Description . 16
4.3.2.3 Limits . 16
4.3.2.4 Conformance . 16
4.3.3 Occupied bandwidth . 16
4.3.3.1 Applicability. 16
4.3.3.2 Description . 16
4.3.3.3 Limits . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter spectrum emission mask . 17
4.3.4.1 Applicability. 17
4.3.4.2 Description . 17
4.3.4.3 Limits . 17
4.3.4.4 Conformance . 18
4.3.5 Transmitter unwanted emissions in the spurious domain . 18
4.3.5.1 Applicability. 18
4.3.5.2 Description . 18
4.3.5.3 Limits . 18
4.3.5.4 Conformance . 18
4.3.6 Duty cycle . 18
4.3.6.1 Applicability. 18
4.3.6.2 Description . 18
4.3.6.3 Limits . 19
4.3.6.4 Conformance . 19
4.3.7 Transient power . 19
4.3.7.1 Applicability. 19
4.3.7.2 Description . 19
4.3.7.3 Limits . 19
4.3.7.4 Conformance . 19
4.4 Requirements for receivers . 19
4.4.1 Receiver sensitivity . 19
4.4.1.1 Applicability. 19
4.4.1.2 Description . 19
ETSI
4 Draft ETSI EN 304 220-2 V1.1.0 (2022-09)
4.4.1.3 Limits . 20
4.4.1.4 Conformance . 20
4.4.2 Adjacent channel selectivity . 20
4.4.2.1 Applicability. 20
4.4.2.2 Description . 20
4.4.2.3 Limits . 20
4.4.2.4 Conformance . 20
4.4.3 Receiver spurious response rejection . 20
4.4.3.1 Applicability. 20
4.4.3.2 Description . 21
4.4.3.3 Limits . 21
4.4.3.4 Conformance . 21
4.4.4 Blocking . 21
4.4.4.1 Applicability. 21
4.4.4.2 Description . 21
4.4.4.3 Limits .
...
HARMONISED EUROPEAN STANDARD
Wideband data transmission SRD;
Harmonised Standard for access to radio spectrum;
Part 2: Wideband data transmission devices:
terminal node operating in the frequency bands 863 MHz to
868 MHz and 915,8 MHz to 919,4 MHz
2 ETSI EN 304 220-2 V1.2.1 (2024-08)
Reference
DEN/ERM-TG28-557
Keywords
harmonised standard, SRD
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 304 220-2 V1.2.1 (2024-08)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 General performance criteria . 15
4.3 Requirements for transmitters . 16
4.3.1 Frequency error . 16
4.3.1.1 Applicability. 16
4.3.1.2 Description . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 Effective radiated power . 16
4.3.2.1 Applicability. 16
4.3.2.2 Description . 16
4.3.2.3 Limits . 16
4.3.2.4 Conformance . 16
4.3.3 Occupied bandwidth . 16
4.3.3.1 Applicability. 16
4.3.3.2 Description . 16
4.3.3.3 Limits . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter spectrum emission mask . 17
4.3.4.1 Applicability. 17
4.3.4.2 Description . 17
4.3.4.3 Limits . 17
4.3.4.4 Conformance . 18
4.3.5 Transmitter unwanted emissions in the spurious domain . 18
4.3.5.1 Applicability. 18
4.3.5.2 Description . 18
4.3.5.3 Limits . 18
4.3.5.4 Conformance . 18
4.3.6 Duty cycle . 18
4.3.6.1 Applicability. 18
4.3.6.2 Description . 18
4.3.6.3 Limits . 19
4.3.6.4 Conformance . 19
4.3.7 Transient power . 19
4.3.7.1 Applicability. 19
4.3.7.2 Description . 19
4.3.7.3 Limits . 19
4.3.7.4 Conformance . 19
4.4 Requirements for receivers . 19
4.4.1 Receiver sensitivity . 19
4.4.1.1 Applicability. 19
4.4.1.2 Description . 19
ETSI
4 ETSI EN 304 220-2 V1.2.1 (2024-08)
4.4.1.3 Limits . 20
4.4.1.4 Conformance . 20
4.4.2 Adjacent channel selectivity . 20
4.4.2.1 Applicability. 20
4.4.2.2 Description . 20
4.4.2.3 Limits . 20
4.4.2.4 Conformance . 20
4.4.3 Receiver spurious response rejection . 20
4.4.3.1 Applicability. 20
4.4.3.2 Description . 21
4.4.3.3 Limits . 21
4.4.3.4 Conformance . 21
4.4.4 Blocking . 21
4.4.4.1 Applicability. 21
4.4.4.2 Description . 21
4.4.4.3 Limits . 21
4.4.4.4 Conformance .
...
Draft ETSI EN 304 220-2 V1.2.0 (2024-06)
HARMONISED EUROPEAN STANDARD
Wideband data transmission SRD;
Harmonised Standard for access to radio spectrum;
Part 2: Wideband data transmission devices:
terminal node operating in the frequency bands 863 MHz to
868 MHz and 915,8 MHz to 919,4 MHz
2 Draft ETSI EN 304 220-2 V1.2.0 (2024-06)
Reference
DEN/ERM-TG28-557
Keywords
harmonised standard, SRD
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 304 220-2 V1.2.0 (2024-06)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 General performance criteria . 15
4.3 Requirements for transmitters . 16
4.3.1 Frequency error . 16
4.3.1.1 Applicability. 16
4.3.1.2 Description . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 Effective radiated power . 16
4.3.2.1 Applicability. 16
4.3.2.2 Description . 16
4.3.2.3 Limits . 16
4.3.2.4 Conformance . 16
4.3.3 Occupied bandwidth . 16
4.3.3.1 Applicability. 16
4.3.3.2 Description . 16
4.3.3.3 Limits . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter spectrum emission mask . 17
4.3.4.1 Applicability. 17
4.3.4.2 Description . 17
4.3.4.3 Limits . 17
4.3.4.4 Conformance . 18
4.3.5 Transmitter unwanted emissions in the spurious domain . 18
4.3.5.1 Applicability. 18
4.3.5.2 Description . 18
4.3.5.3 Limits . 18
4.3.5.4 Conformance . 18
4.3.6 Duty cycle . 18
4.3.6.1 Applicability. 18
4.3.6.2 Description . 18
4.3.6.3 Limits . 19
4.3.6.4 Conformance . 19
4.3.7 Transient power . 19
4.3.7.1 Applicability. 19
4.3.7.2 Description . 19
4.3.7.3 Limits . 19
4.3.7.4 Conformance . 19
4.4 Requirements for receivers . 19
4.4.1 Receiver sensitivity . 19
4.4.1.1 Applicability. 19
4.4.1.2 Description . 19
ETSI
4 Draft ETSI EN 304 220-2 V1.2.0 (2024-06)
4.4.1.3 Limits . 20
4.4.1.4 Conformance . 20
4.4.2 Adjacent channel selectivity . 20
4.4.2.1 Applicability. 20
4.4.2.2 Description . 20
4.4.2.3 Limits . 20
4.4.2.4 Conformance . 20
4.4.3 Receiver spurious response rejection . 20
4.4.3.1 Applicability. 20
4.4.3.2 Description . 21
4.4.3.3 Limits . 21
4.4.3.4 Conformance . 21
4.4.4 Blocking . 21
4.4.4.1 Applicability. 21
4.4.4.2 Description . 21
4.4.4.3 Limits .
...
SLOVENSKI STANDARD
01-oktober-2024
Širokopasovni sistemi za prenos podatkov SRD - Harmonizirani standard za
dostop do radijskega spektra - 2. del: Širokopasovne naprave za prenos podatkov:
terminalsko vozlišče, ki deluje v frekvenčnih pasovih od 863 MHz do 868 MHz in od
915,8 MHz do 919,4 MHz
Wideband data transmission SRD - Harmonised Standard for access to radio spectrum -
Part 2: Wideband data transmission devices: terminal node operating in the frequency
bands 863 MHz to 868 MHz and 915,8 MHz to 919,4 MHz
Ta slovenski standard je istoveten z: ETSI EN 304 220-2 V1.2.1 (2024-08)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
HARMONISED EUROPEAN STANDARD
Wideband data transmission SRD;
Harmonised Standard for access to radio spectrum;
Part 2: Wideband data transmission devices:
terminal node operating in the frequency bands 863 MHz to
868 MHz and 915,8 MHz to 919,4 MHz
2 ETSI EN 304 220-2 V1.2.1 (2024-08)
Reference
DEN/ERM-TG28-557
Keywords
harmonised standard, SRD
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 304 220-2 V1.2.1 (2024-08)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 12
3.1 Terms . 12
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 General performance criteria . 15
4.3 Requirements for transmitters . 16
4.3.1 Frequency error . 16
4.3.1.1 Applicability. 16
4.3.1.2 Description . 16
4.3.1.3 Limits . 16
4.3.1.4 Conformance . 16
4.3.2 Effective radiated power . 16
4.3.2.1 Applicability. 16
4.3.2.2 Description . 16
4.3.2.3 Limits . 16
4.3.2.4 Conformance . 16
4.3.3 Occupied bandwidth . 16
4.3.3.1 Applicability. 16
4.3.3.2 Description . 16
4.3.3.3 Limits . 17
4.3.3.4 Conformance . 17
4.3.4 Transmitter spectrum emission mask . 17
4.3.4.1 Applicability. 17
4.3.4.2 Description . 17
4.3.4.3 Limits . 17
4.3.4.4 Conformance . 18
4.3.5 Transmitter unwanted emissions in the spurious domain . 18
4.3.5.1 Applicability. 18
4.3.5.2 Description . 18
4.3.5.3 Limits . 18
4.3.5.4 Conformance . 18
4.3.6 Duty cycle . 18
4.3.6.1 Applicability. 18
4.3.6.2 Description . 18
4.3.6.3 Limits . 19
4.3.6.4 Conformance . 19
4.3.7 Transient power . 19
4.3.7.1 Applicability. 19
4.3.7.2 Description . 19
4.3.7.3 Limits . 19
4.3.7.4 Conformance . 19
4.4 Requirements for receivers . 19
4.4.1 Receiver sensitivity . 19
4.4.1.1 Applicability. 19
4.4.1.2 Description . 19
ETSI
4 ETSI EN 304 220-2 V1.2.1 (2024-08)
4.4.1.3 Limits . 20
4.4.1.4 Conformance . 20
4.4.2 Adjacent channel selectivity . 20
4.4.2.1 Applicability. 20
4.4.2.2 Description . 20
4.4.2.3 Limits . 20
4.4.2.4 Conformance . 20
4.4.3 Receiver spurious response rejection . 20
4.4.3.1 Applicability. 20
4.4.3.2 Description . 2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.