SIST EN 1906:2012
(Main)Building hardware - Lever handles and knob furniture - Requirements and test methods
Building hardware - Lever handles and knob furniture - Requirements and test methods
This European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles, knobs for doors, push pads and similar in combination with backplates or roses operating latches.
This European Standard is applicable only to lever handles and knobs that operate a latch or a lock and other devices.
It specifies four categories of use according to frequency and other conditions of use.
Schlösser und Baubeschläge - Türdrücker und Türknäufe - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Prüfverfahren für und Anforderungen an Drückerstifte und Befestigungs-elemente, Betätigungsmomente, zulässiges freies Spiel und Sicherheit, freie Winkelbewegung und -versatz, Dauer¬haftigkeit, statische Festigkeit und Korrosionsbeständigkeit von Türdrückern und Türknäufen mit und ohne Federsystem, Stoßplatten u. ä. in Kombination mit Türschildern oder Türrosetten zur Betätigung von Schloss¬fallen fest.
Diese Europäische Norm gilt nur für Türdrücker und Türknäufe, mit denen ein Fallenriegel oder ein Schloss sowie sonstige Einrichtungen betätigt werden.
Sie legt vier Klassen für die Gebrauchskategorie entsprechend der Betätigungshäufigkeit und weiteren Anwendungs¬bedingungen fest.
Quincaillerie pour le bâtiment - Béquilles et boutons de porte - Exigences et méthodes d'essai
La présente Norme européenne spécifie les méthodes d'essai ainsi que les exigences pour les carrés et les éléments de fixation, les couples de manœuvre, le jeu autorisé et la sécurité, la rotation et le désaxage, l'endurance, la résistance statique et la résistance à la corrosion pour les dispositifs de porte à béquilles avec et sans ressort de rappel, les boutons de porte, les plaques de poussée et similaires en combinaison avec des plaques ou rosettes de manœuvre des serrures.
La présente Norme européenne s'applique uniquement aux béquilles et boutons de portes qui manœuvrent une serrure à pêne dormant ou une serrure bec de cane et d'autres dispositifs.
Il spécifie quatre catégories d'utilisation selon la nature et la fréquence d'utilisation.
Stavbno okovje - Kljuke in bunke - Zahteve in preskusne metode
Ta evropski standard določa preskusne metode in zahteve za vretena in pritrditvene elemente, obratovalne vrtilne momente, dopustno prosto delovanje in varnost, prosto kotno gibanje in neporavnanost, trajnost, statično trdnost in odpornost proti koroziji za vzmetene in nevzmetene kljuke, bunke za vrata, pritisne pedale ter podobne naprave skupaj z zapahi, ki upravljajo čelne plošče ali rozete. Ta evropski standard se uporablja le za kljuke in bunke, ki delujejo z zapahom ali ključavnico in drugimi napravami. Standard določa štiri kategorije uporabe glede na pogostost in druge pogoje uporabe.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stavbno okovje - Kljuke in bunke - Zahteve in preskusne metodeSchlösser und Baubeschläge - Türdrücker und Türknäufe - Anforderungen und PrüfverfahrenQuincaillerie pour le bâtiment - Béquilles et boutons de porte - Exigences et méthodes d'essaiBuilding hardware - Lever handles and knob furniture - Requirements and test methods91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 1906:2012SIST EN 1906:2012en,fr,de01-julij-2012SIST EN 1906:2012SLOVENSKI
STANDARDSIST EN 1906:20101DGRPHãþD
SIST EN 1906:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1906
May 2012 ICS 91.190 Supersedes EN 1906:2010English Version
Building hardware - Lever handles and knob furniture - Requirements and test methods
Quincaillerie pour le bâtiment - Béquilles et boutons de porte - Exigences et méthodes d'essai
Schlösser und Baubeschläge - Türdrücker und Türknäufe -Anforderungen und Prüfverfahren This European Standard was approved by CEN on 16 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1906:2012: ESIST EN 1906:2012
EN 1906:2012 (E) 2 Contents Page Foreword . 41 Scope . 62 Normative references . 63 Terms and definitions . 64 Classification . 114.1 Coding system . 114.1.1 General . 114.1.2 Category of use (first digit) . 114.1.3 Durability (second digit) . 114.1.4 Door mass (third digit) . 114.1.5 Fire resistance (fourth digit) . 114.1.6 Safety (fifth digit) . 124.1.7 Corrosion resistance (sixth digit) . 124.1.8 Security (seventh digit) . 124.1.9 Type of operation (eighth digit) . 124.2 Example of classification . 135 Requirements . 135.1 General . 135.2 Check of spindle and fastening elements . 155.3 Rotational torque strength . 155.4 Axial strength of lock furniture or latch furniture and fixing . 155.5 Free play and safety . 155.5.1 Requirement for free play . 155.5.2 Safety requirements . 155.6 Free angular movement or misalignment . 165.7 Torque of return mechanism . 165.7.1 General . 165.7.2 Unsprung and spring-assisted lever handles . 165.7.3 Unsprung knobs . 165.7.4 Spring-loaded lever handles or knobs . 165.8 Durability of mechanism . 165.9 Repeat test of axial strength of lock or latch furniture and methods of fixing . 175.10 Repeat test of free play measurement . 175.11 Repeat test of measurement of free angular movement or misalignment . 175.12 Repeat test of torque of return mechanism . 175.13 Axial strength for safety furniture (optional) . 175.14 Corrosion resistance . 176 Tests − Sequence and test. 176.1 Test sequence . 176.2 Test apparatus . 186.2.1 Fixing to a test block (see Figures B.1 and B.2) . 186.2.2 Apparatus for strength tests . 196.2.3 Apparatus for endurance test . 197 Test methods . 207.1 General . 207.2 Acceptance conditions . 207.3 Performance tests. 217.3.1 Check of spindle and fastening elements (Test 1) . 21SIST EN 1906:2012
EN 1906:2012 (E) 3 7.3.2 Axial strength of lock or latch furniture and fastening elements (Test 2) .217.3.3 Free play and safety (Test 3) .217.3.4 Free angular movement or misalignment (Test 4) .217.3.5 Torque of return mechanism (Test 5) .217.3.6 Durability of mechanism (Test 6) .227.3.7 Repeat test of axial strength and methods of fastening (Test 7) .237.3.8 Repeat check of free play (Test 8) .237.3.9 Repeat measurement of free angular movement (Test 9) .237.3.10 Repeat test of torque of return mechanism (Test 10) .237.3.11 Axial strength and method of fastening of special safety furniture (Test 11 − optional) 237.3.12 Rotational strength (Test 12) .237.4 Corrosion resistance (Test 13) .248 Marking .24Annex A (normative)
Requirements for security lock furniture for use on burglary resistant doors .25A.1 Introduction .25A.2 Requirements .25A.2.1 Design requirements .25A.2.2 Performance requirements .26A.3 Test methods .26A.3.1 Test parameters .26A.3.2 Pre-checks (Test A.1) .27A.3.3 Plate strength (Test A.2) .27A.3.4 Strength of fastening elements (Test A.3) .28A.3.5 Resistance to attack by drilling (Test A.4) .28A.3.6 Resistance to attack by chisel (Test A.5) .28A.3.7 Strength of plug protection plate (if fitted) (Test A.6) .30A.4 Classification .30A.5 Marking .30A.6 Fixing instructions .30Annex B (informative)
Test apparatus illustrations .31Annex C (normative)
Requirements for lever handles and knob furniture for use on smoke control and fire resistant doors.45C.1 General .45C.2 Classification for smoke control and fire resistant Grades A, B, C and D .45C.3 Additional requirements for fire resistance classification Grade D with fire proof core .47C.4 Tests .47C.4.1 Fire resistance .47C.4.2 Smoke control .47C.4.3 Door cycle test - Durability and functional endurance for grades A1, B1, C1, D1 .47C.5 Test report .48C.6 Voluntary Monitoring .48Annex D (informative)
Flow charts of test procedures .49Bibliography .52 SIST EN 1906:2012
EN 1906:2012 (E) 4 Foreword This document (EN 1906:2012) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1906:2010. Contribution to the preparation of this standard has been made by the European manufacturers' organisation "ARGE". This document is part of a series of European Standards dedicated to building hardware products. Compliance of a set of lock or latch furniture with this European Standard means that it conforms to requirements for normal use, for safety in use and for safety in case of fire. Normative and informative annexes to this document are indicated in the contents. Compliance with this European Standard ensures a margin of strength in excess of that needed for normal operation. Additional requirements are necessary for special safety furniture used in situations where there is a high risk of failure. Since special safety furniture is not essential in every situation, this European Standard provides additional safety requirements (see 5.13) which are only necessary when the manufacturer claims it essential that the safety furniture conform to these requirements. This document states five grades of security. Grade 0 is in accordance with requirements specified in the main part of this document. Grades 1 to 4 are specified in accordance with requirements for security lock furniture for use on burglary-resistant doors (see Annex A). These additional security requirements are necessary only when the manufacturer claims that products need have a high level of security, which is not essential in every situation. The suitability of lock or latch furniture for use on fire/smoke door assemblies is determined by fire performance tests in addition to the performance tests specified by this standard. Since suitability for use on fire/smoke door assemblies is not essential in every situation, the manufacturer has the option of stating whether the furniture is claimed to conform to these additional requirements or not. If such a claim is made, the additional requirements given in Annex C are necessary. Annex C refers to all kinds of lock or latch furniture for use on fire/smoke door assemblies, and their use on single-leaf or double-leaf doors. A product conforming to this standard can also be part of an exit device in accordance with EN 179. In order to claim conformance to EN 1906 all relevant requirements of Table 1, Main test parameters, should be met and declared. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, SIST EN 1906:2012
EN 1906:2012 (E) 5 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1906:2012
EN 1906:2012 (E) 6 1 Scope
This European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles, knobs for doors, push pads and similar devices in combination with backplates or roses operating latches. This European Standard is applicable only to lever handles and knobs that operate a latch or a lock and other devices. It specifies four categories of use according to frequency and other conditions of use. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 314-2:1993, Plywood — Bonding quality — Part 2: Requirements EN 636:2003, Plywood
Specifications EN 1154:1996+A1:2002, Building hardware
Controlled door closing devices
Requirements and test methods EN 1634-1, Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware — Part 1: Fire resistance tests for doors, shutters and openable windows EN 1634-2, Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware — Part 2: Fire resistance characterisation test for elements of building hardware EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware — Part 3: Smoke control test for door and shutter assemblies EN 1670:2007, Building hardware — Corrosion resistance — Requirements and test methods EN 12209, Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025) ISO 10899, High-speed steel two-flute twist drills — Technical specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 backplate element generally, but not essentially, rectangular in plan whose purpose is, firstly, functional, providing a bearing for the rotation of a door lever handle or knob and the means of attachment to the door; and, secondly, decorative, working as a trim plate to cover holes provided in the door for the passage of spindles, keys or lock cylinders SIST EN 1906:2012
EN 1906:2012 (E) 7 Note 1 to entry: See Figure 1a. 3.2 baseplate component of an assembly of two parts that fit together to form a backplate or rose, which provides the bearing and means of fixing the assembly to the door
Note 1 to entry: See Figure 1b. 3.3 door furniture combination of lever handles or knobs on backplates or roses for the purpose of operating latches or locks 3.4 door knob fixed or rotatable operating element, usually designed to be circular in plan, but which may be non-circular, with a maximum offset of 75 mm from its axis of rotation; and which engages a spindle passing through the door and operating then a latch mechanism when rotated, so that the latch bolt is withdrawn to unlatch the door; or alternatively, is fixed against rotation and is used to pull the door to the closed position and thereby re-latch the door Note 1 to entry: See Figure 2. 3.5 door lever handle rotatable operating element designed as a lever with a length from its axis of rotation to its free end that exceeds 75 mm, and which engages a spindle passing through a door 3.6 emergency release facility provided on the external plate that enables the door to be opened in case of emergency Note 1 to entry: See Figure 3. 3.7 set of door furniture two lever handles or knobs with two lockplates or latchplates (or, alternatively, roses and escutcheons), complete with a spindle and fastening elements to operate the latch 3.8 entrance set set with a lever handle on the one side of the door and a fixed knob or bar or no handle on the other 3.9 fire protection inlay metal sheet inlay under the escutcheon and in the lever handle, which prevents fire going through after melting of the cover or escutcheon Note 1 to entry: Materials with a melting point higher than 1 000 °C are used. 3.10 fireproof core fireproof material (typically steel) inside a lever handle which enables the handle function to remain operable after a fire 3.11 escutcheon surround with a shaped hole to accommodate a key or a lock cylinder, with or without a pivoted cover plate, intended primarily to protect the door leaf from abrasion caused by keys SIST EN 1906:2012
EN 1906:2012 (E) 8 Note 1 to entry: See Figure 2. 3.12 external plate backplate or rose that is fitted on the external face of a door Note 1 to entry: See Figure 3. 3.13 fixed spindle system system in which the spindle is fastened to both lever handles or both knobs of a lockset or latchset (often without any additional fixing of the handles or knobs to the backplates or roses), which enables the rotation of the follower of the lock or latch to withdraw the latch bolt; and which enables adaptation for different thicknesses of doors, connects the lever handle or knob to the spindle, and transmits imposed axial pulling forces to the opposite face of the door 3.14 floating spindle system system in which the spindle is not attached to either of the lever handles or knobs of a lockset or latchset, but has additional fixing of the lever handles or knobs to the backplates or roses; and which enables the rotation of the follower of the lock or latch to withdraw the latchbolt; and which enables adaptation for different thicknesses of doors Note 1 to entry: This system does not transmit imposed axial pulling forces to the opposite face of the door. 3.15 radial split spindle system system in which the spindle is split across the radial X-section which is normal to its axis of normal operation, including door furniture spindle suitable for emergency exit-entrance door locks 3.16 half set single lever or knob attached to a plate or rose which enables operation of the lock or latch from one side of the door only 3.17 indicator device that is visible from the exterior of the door to indicate whether the door is locked or unlocked 3.18 internal plate backplate or rose that is fitted on the internal face of a door Note 1 to entry: See Figure 3. 3.19 latchplate backplate adapted for use with a latch and having no keyhole or cylinder aperture 3.20 lockplate backplate having an aperture for use with a cylinder or lever key 3.21 cylinder protection plate plate whose function is to protect the cylinder plug and its components against violent attack SIST EN 1906:2012
EN 1906:2012 (E) 9 3.22 rose element generally circular, but which may have equi-axial or approximately equi-axial shapes such as square or octagonal, that otherwise has the same features as a backplate Note 1 to entry: See Figure 2. 3.23 security furniture device which provides added resistance to the lock and/or cylinder against physical attack 3.24 set of mortice latch furniture two door lever handles or knobs with two latchplates or roses, complete with a spindle and fastening elements 3.25 set of mortice lock furniture two door lever handles or knobs with two lockplates (or, alternatively, roses and escutcheons), complete with a spindle and fastening elements Note 1 to entry: See Figure 2. 3.26 special safety furniture furniture where the strength of the fixing of the lever, lever handle or knob to the backplate and/or spindle, and the strength of the fixing of the backplate to the door, combine to provide a robust attachment to withstand a heavy force in any direction of removing the lever, lever handle or knob from the door 3.27 spindle bar, usually square in cross-section, that engages with a follower 3.28 spring-assisted furniture lever handle or knob furniture, usually exceptionally heavy in design, that incorporates a spring which assists the return of the handle to its intended "at-rest" position but which may not necessarily have sufficient torque to return it fully Note 1 to entry: For exceptionally heavy lever handles, it is difficult to design springs that have sufficient torque to return the handles to their "at-rest" position and also have an adequate working life. For reasons relating to designs of springs, the operating angle of such lever handles is usually restricted to 40°, and they are used with latches whose bolts retract fully at this angle of operation. When in use, the combined action of the lever handle spring and the latch spring is sufficient to return the lever handle to its intended "at-rest" position. 3.29 Sprung furniture door furniture that incorporates a spring which fully returns the lever handle or knob to its intended "at-rest" position after operating the latch Note 1 to entry: Sprung furniture frequently includes an internal stop to prevent rotation beyond the intended "at-rest" position, but this feature is not essential if the furniture is used with a latch mechanism incorporating its own stop. 3.30 thumb turn small T-handle, knob or other handle fitted on the internal plate of a set of bathroom lock furniture that operates a lock deadbolt to provide privacy rather than high security Note 1 to entry: See Figure 3. SIST EN 1906:2012
EN 1906:2012 (E) 10 3.31 trim plate component of an assembly of two parts that fit together to form a backplate or rose which is fastened to the baseplate as a decorative cover Note 1 to entry: See Figure 1b). 3.32
assessment documented expert opinion based on technical data from an original test, taking into account relevant factors such as materials and design
12
a) One part backplate b) Two part backplate Key 1 Baseplate 2 Trim plate Figure 1 — Illustrations of backplates
123 12354 Key
Key
1 Rose
1 External plate 4 Emergency release 2 Door knob
2 Internal plate 5 Thumb turn 3 Escutcheon
3 Lever handle
Figure 2 — Set of lock furniture Figure 3 — Bathroom lockset SIST EN 1906:2012
EN 1906:2012 (E) 11 4 Classification 4.1 Coding system 4.1.1 General For the purpose of document, lever handles and knobs for doors on backplates or roses shall be classified in accordance with the eight digit coding system specified in 4.1.2 to 4.1.9. 4.1.2 Category of use (first digit) Four grades of use are identified: grade 1: medium frequency of use by people with a high incentive to exercise care and with a small chance of misuse, e.g. internal residential doors; grade 2: medium frequency of use by people with some incentive to exercise care but where there is some chance of misuse, e.g. internal office doors; grade 3: high frequency of use by public or others with little incentive to exercise care and with a high chance of misuse, e.g. public office doors; grade 4: high frequency of use on doors which are subject to frequent violent usage, e.g. football stadiums, offshore installations (oil rigs), barracks, public toilets, etc. 4.1.3 Durability (second digit) Two grades of durability are identified: grade 6: medium frequency of use: 100 000 cycles; grade 7: high frequency of use: 200 000 cycles. 4.1.4 Door mass (third digit) No classification. 4.1.5 Fire resistance (fourth digit) Five grades of fire resistance are identified and shall receive the extension ”1” for an optional door cycle test: grade 0: no performance determined; grade A: for use on smoke-control doors; grade A1: for use on smoke-control doors, tested with 200 000 cycles on a test door; grade B: for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.