SIST EN 61300-2-34:1999
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-34: Tests - Resistance to solvents and contaminating fluids
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-34: Tests - Resistance to solvents and contaminating fluids
Superseded by EN 61300-2-34:2009
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren -- Teil 2-34: Prüfungen - Widerstand gegen Lösungsmittel und aggressive Flüssigkeiten
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-34: Essais - Résistance aux solvants et aux fluides contaminants
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids (IEC 61300-2-34:1995)
General Information
Relations
Standards Content (Sample)
NORME CEI
INTERNATIONALE I EC
1300-2-34
INTERNATIONAL
Première édition
STANDARD First edition
1995-06
Dispositifs d'interconnexion et composants
passifs à fibres optiques –
Méthodes fondamentales d'essais
et de mesures –
Partie 2-34:
Essais – Résistance aux solvants
et aux fluides contaminants
Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 2-34:
Tests – Resistance to solvents
and contaminating fluids
© CEI 1995 Droits de reproduction réservés — Copyright — all rights reserved
Aucune partie de cette publication ne peut ètre reproduite ni No part of this publication may be reproduced or utilizad in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Inte rnationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission PRICE CODE
IEC MeKayHapolaHaa 3neKrporexHH4ecsaa lioMNCCtia
• Pour prix, voir catalogue en vigueur
•
For price, see current catalogue
---------------------- Page: 1 ----------------------
1300-2-34 © IEC:1995 - 3 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-34: Tests – Resistance to solvents
and contaminating fluids
FOREWORD
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
1)
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental organizations
liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
2)
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
3) They have the form of recommendations for international use published in the form of standards, technical
reports or guides and they are accepted by the National Committees in that sense.
In order to promote international unification, IEC National Committees undertake to apply IEC International
4)
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
International Standard IEC 1300-2-34 has been prepared by sub-committee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
on voting
DIS Repo rt
86B/636/RVD
86B/558/DIS
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
Fibre optic interconnecting
IEC 1300 consists of the following parts, under the general title
devices and passive components - Basic test and measurement procedures:
Part 1: General and guidance
Part 2: Tests
Part 3: Examinations and measurements
---------------------- Page: 2 ----------------------
— 5 —
1300-2-34 © IEC:1995
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-34: Tests – Resistance to solvents
and contaminating fluids
1 General
Scope and object
1.1
The purpose of this part of IEC 1300 is to establish the ability of a fibre optic device to resist
degradation when exposed to specific solvents
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.