SIST-TS CEN/TS 15924:2010
(Main)Fertilizers - Determination of the fineness of grinding of soft natural phosphates
Fertilizers - Determination of the fineness of grinding of soft natural phosphates
This document specifies a method for the determination of the fineness of grinding of soft natural phosphates by wet sieving.
Düngemittel - Bestimmung der Mahlfeinheit von weicherdigem Rohphosphat
Das vorliegende Dokument legt ein Verfahren zur Bestimmung der Mahlfeinheit von weicherdigem Roh-phosphat durch Nasssieben fest.
Engrais - Détermination de la finesse de mouture des phosphates naturels tendres
Le présent document a pour objet de fixer une méthode de détermination de la finesse de mouture des phosphates naturels tendres par tamisage par voie humide.
Gnojila - Določevanje finosti mletja mehkih naravnih fosfatov
Ta dokument opredeljuje metodo določevanja finosti mletja mehkih naravnih fosfatov z mokrim sejanjem.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 15924:2010
01-februar-2010
*QRMLOD'RORþHYDQMHILQRVWLPOHWMDPHKNLKQDUDYQLKIRVIDWRY
Fertilizers - Determination of the fineness of grinding of soft natural phosphates
Düngemittel - Bestimmung der Mahlfeinheit von weicherdigem Rohphosphat
Engrais - Détermination de la finesse de mouture des phosphates naturels tendres
Ta slovenski standard je istoveten z: CEN/TS 15924:2009
ICS:
65.080 Gnojila Fertilizers
SIST-TS CEN/TS 15924:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15924:2010
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15924:2010
TECHNICAL SPECIFICATION
CEN/TS 15924
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
September 2009
ICS 65.080
English Version
Fertilizers - Determination of the fineness of grinding of soft
natural phosphates
Engrais - Détermination de la finesse de mouture des Düngemittel - Bestimmung der Mahlfeinheit von
phosphates naturels tendres weicherdigem Rohphosphat
This Technical Specification (CEN/TS) was approved by CEN on 3 August 2009 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15924:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15924:2010
CEN/TS 15924:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .4
5 Sampling .4
6 Reagents .4
7 Apparatus .4
8 Procedure .5
9 Calculation and expression of the result .5
10 Test report .6
Bibliography .7
2
---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 15924:2010
CEN/TS 15924:2009 (E)
Foreword
This document (CEN/TS 15924:2009) has been prepared by Technical Committee CEN/TC 260 “Fertilizers
and liming materials”, the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 15924:2010
CEN/TS 15924:200
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.