SIST EN 60456:2001/A13:2003
(Amendment)Clothes washing machines for household use - Methods for measuring the performance
Clothes washing machines for household use - Methods for measuring the performance
Superseded by EN 60456:2005
Waschmaschinen für den Hausgebrauch - Verfahren zur Messung der Gebrauchseigenschaften
Machines à laver le linge pour usage domestique - Méthodes de mesure de l'aptitude à la fonction
Amendment to clauses 2, 5, 6, 7, 8, 9 & annex F and addition of clause 17 & annexes ZB, ZC, ZD, ZE & ZF
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60456:2001/A13:2003
STANDARD
junij 2003
Amendment to clauses 2, 5, 6, 7, 8, 9 & annex F and addition of clause 17 &
annexes ZB, ZC, ZD, ZE & ZF
ICS 97.060 Referenčna številka
SIST EN 60456:2001/A13:2003(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60456/A13
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2003
ICS 97.060
English version
Clothes washing machines for household use -
Methods for measuring the performance
Machines à laver le linge Waschmaschinen
pour usage domestique - für den Hausgebrauch -
Méthodes de mesure Verfahren zur Messung
de l'aptitude à la fonction der Gebrauchseigenschaften
This amendment A13 modifies the European Standard EN 60456:1999; it was approved by CENELEC on
2002-12-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60456:1999/A13:2003 E
---------------------- Page: 2 ----------------------
EN 60456:1999/A13:2003 - 2 -
Foreword
This amendment was prepared by WG 1, Washing machines, of the Technical Committee CENELEC
TC 59X, Consumer information related to household electrical appliances.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as amendment A13 to EN 60456:1999 on 2002-12-03.
The following dates were fixed:
- latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-06-01
- latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2003-06-01
This amendment improves the reproducibility of the test method for the determination of the washing
efficiency of washing machines. It does not modify the test procedure in principle but specifies much more
precisely the test conditions. Modifications of IEC 60456 and IEC 61121 presently under consideration by
IEC/SC 59D are taken into account as far as possible.
It additionally introduces the common ambient conditions for washing machines, tumble dryers and
dishwashers.
In future the new reference detergent is called generally “ IEC A* “.
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this amendment, Annexes ZA, ZB, ZC, ZD and ZE are normative and Annex ZF is informative.
Annexes ZA to ZF have been added by CENELEC.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60456:1999/A13:2003
2 Normative references
Delete the date of publication of IEC 60734.
Add:
IEC 62053-21 Electricity metering equipment (a.c.) – Particular requirements
Part 21: Static meters for active energy (classes 1 and 2)
DIN 53923 Prüfung von Textilien – Bestimmung des Wasseraufnahmevermögens von textilen
Flächengeweben (Testing of textiles – Determination of water absorption of textile
fabrics)
5 Rated capacity
Add as first paragraph:
The rated capacity for measurements to determine values to be declared for the 60 °C cotton cycle
according to the Commission’s Directive on energy labelling is the value declared by the manufacturer as
highest amount of cotton textiles to be washed, given in the instruction manual or on the energy label
supplied with the machine, whatever is higher.
6 General conditions for measurements
6.1 General
Add the following three paragraphs after the first one:
The measurements shall be carried out on a new machine installed and used in accordance with the
manufacturer's instructions, except if required otherwise by this standard.
Before commencing a series of tests machines shall run two complete cycles, at maximum temperature
(e.g. 95 °C); the first cycle without load and with 50 g of the reference detergent IEC A*. The second one
without load and without detergent.
Washing performance, spinning extraction, time and water and energy consumption shall be tested in the
same cycle.
6.2.1 Electrical supply
Add as the last paragraph:
The voltage stabiliser used shall ensure that the normal operation of the washing machine does
not cause undue distortion of the voltage waveform.
6.2.2 Water supply
Delete in second line of the first paragraph: “- Method B”.
6.2.3 Ambient temperature
Replace (20 + 5) °C by (23 + 2) °C.
---------------------- Page: 4 ----------------------
EN 60456:1999/A13:2003 - 4 -
7 Materials
7.1.1 Cotton base load
Replace the first paragraph including the specifications of the sheets, pillowcases and hand towels as
follows:
The cotton base load shall consist of sheets, pillowcases and hand towels conforming with the
specifications given in Annex ZB.
Replace the last paragraph as follows:
An item shall not be used more than 80 cycles (not counting pre-treatment and the normalization
between two test series).
To minimise the influence of ageing of the textiles, the base load shall consist of items that are evenly
distributed in age for all different parts (sheets, pillowcases and hand towels) to give a weighted average
age of the load between 30 and 50 cycles, using the nominal weights given in Annex ZB. How the
average age of the load can be calculated is given in Annex ZE, examples how the textiles may be
exchanged are given in Annex ZF.
The age-distribution is to be reported.
7.2 Preparation of the base load
7.2.1 Preparation of textiles
Replace the first paragraph as follows:
New textile items shall be pre-treated before their first use by five normalisation processes according to
7.2.2 but using 15 g/kg of the reference detergent IEC A* followed by conditioning according to 7.2.3.
7.2.2 Normalisation of textiles
Replace the first paragraph by the following:
Wash the textiles in the Cotton 60 °C program of a reference washing machine without detergent.
7.2.3 Conditioning of textiles
Replace the present text by the following:
The textiles are left for at least 15 h in an ambient temperature of (20 ± 2) °C and at an ambient humidity
of (65 ± 5) % RH unless the weight of the load has changed less than 0,5 % between two successive
measurements. These measurements are carried out at two hour intervals.
As an alternative the bone-dry method of Annex F of EN 60456 may be used. After drying the textiles
have to be left at least 5 hours at ambient temperature according to 6.2.3 to take up water before being
used for tests.
If the bone-dry method is used, it shall be reported.
---------------------- Page: 5 ----------------------
- 5 - EN 60456:1999/A13:2003
7.3 Soiled test strips
7.3.1 Characteristics
Add two new paragraphs before NOTE 1:
Washed soiled test strips shall fulfil the performance limits (ratios of Y-values) as defined in Annex ZC.
The storage conditions including deadline of use for soiled test strips shall be given by the manufacturer.
If no conditions are given the soiled test strips shall be kept vacuum packed in a refrigerator and shall be
used within 1 year after production.
8 Instrumentation and accuracy
8.1 Mass
Replace the sentence by the following:
The measurements shall be accurate to ± 0,1 %.
8.8 Electrical energy
Add the following paragraph at the end of the subclause:
Energy meters shall fulfil EN 61036 type 1 specification(s).
8.11 Optical reflectance
Replace the title and the text as follows:
8.11 Reflectance measurement for soiled test strips
Optical measurements of the different types of washed test strip specimens are made with a spectral
photometer. The measuring conditions are as indicated below:
Measuring instrument : spectral photometers that provide reflectance data at a minimum of sixteen
wavelengths spaced at 20 nm intervals or closer between 400 nm and 700 nm
Parameter : tristimulus value Y (CIE Nr. 15.2 , 1986)
Illuminant/observer : D65/10°
Measuring geometry : D/8°
UV filter : UV barrier at 420 nm, i.e. measurement without UV radiation
Measuring diameter : minimum 20 mm
Gloss/specular : excluded, i.e. measurement with open gloss/specular trap
Calibration : has to be done each time the spectral photometer is switched on or at least once per
working day:
white standard: barium sulphate tablet or ceramic tile;
black standard: black body.
For general handling of the device and for further information about calibration the
operation instruction for use shall be observed.
NOTE 1 The spectral photometer should be tested at least once a year for its operation efficiency.
NOTE 2 CIE= Commission Internationale de l'Eclairage (International commission on illumination),
CIE Central Bureau, Kegelgasse 27, A-1030 Vienna/Austria, Tel: +43 (01) 714 31 87, Fax: +43 (01) 713 0838,
E-mail: iecb@ping.at
---------------------- Page: 6 ----------------------
EN 60456:1999/A13:2003 - 6 -
9 Washing performance
9.3 Procedure
9.3.1 General
Add the following new paragraphs at the end of the subclause:
Soiled test strips from the same batch shall be used for the reference machine and for the washing
machine under tests.
All handling of the load and the strips shall be equal. Both the reference machine and the machine under
test shall be loaded in the same way from bottom to top putting in all articles in a flat way. The detailed
procedure is described in ZD.4.
9.3.2 Cotton test load
Add a new paragraph after the NOTE:
The machines are loaded in the way as described in Annex ZD.
9.3.4 Test
Add at the beginning:
The reference machine shall perform a start up cycle before each cycle.
The machine under test shall be at ambient temperature before starting a cycle.
For energy label purposes only one cycle per day shall be done, unless it is verified that all parts of the
machine under test are at ambient temperature.
The dispenser, if any, of the machine under test and of the reference machine is cleaned and dried before
each cycle. It shall be ensured that in the reference machine the detergent is totally dispensed during the
water intake for the main wash.
th
Add to the present 4 paragraph (“After the completion of the washing program, all soiled test strips.) the
following sentence:
Washed and ironed soiled test strips are to be stored in the absence of light at ambient temperature
according to 6.2.3. until reflectance measurements are done.
Add a new NOTE:
NOTE 3 Instead of ironing, the strips can be stretched and rolled on an airy roll between two pieces of fabric, or be fastened to
hang in the dark.
Add in the first sentence of the last paragraph:
The reflectance measurements, performed according to 8.11, are carried out.
---------------------- Page: 7 ----------------------
- 7 - EN 60456:1999/A13:2003
Add a new Clause 104:
104 Data to be reported for reference machine and machine under test
The layout of the tables of 104.1, 104.2 and 104.3 is recommended.
104.1 Cycle data, parameter and results
Laboratory: Identification:
Machine identification: Program selected:
Reference machine identification: Flowmeter identification:
Cycle: (data for individual cycles are recommended) 1 2 3 4 5 average s
Date of cycle
yr.m.d.
Mass of conditioned load (without strips): g
Water consumption during main wash: l
Total water consumption: l
Total energy consumption: kWh
Ambient temperature: °C
Water hardness: mmol/l
Water inlet temperature: °C
Max. temperature during main wash: °C
Min. temperature during main wash: °C
Program duration main wash: min
Total program duration: min
Spin speed: rpm
Mass of base load after spin extraction: g
Final humidity of base load %
Reflectance after wash
Y Carbon black/Oil %
Y Blood %
Y Cocoa %
Y Red wine %
Y Sum %
Performance ratio:
= mandatory = recommended
---------------------- Page: 8 ----------------------
EN 60456:1999/A13:2003 - 8 -
104.2 Basic parameters, equipment and materials
Recommended.
Cotton base load
Sheets: Supplier/batch:
Pillowcases: Supplier/batch:
Hand towels: Supplier/batch:
Conditioning method:
Detergent
Base detergent A* Batch/production date
Perborate Batch/production date
TAED Batch/production date
Soiled strips: Supplier/batch:
Dates of production/deadline of use (yr.m.d):
Photocolorimeter: Manufacturer/type:
Measuring diameter (mm):
Water hardness preparation:
NAT= natural; HARD = hardened;
SOFT = softened; SYN = synthetic
104.3 Reporting on age distribution of the load
Number of items used for the indicated number of
cycles
Nominal weight as 1 - 20 21-40 41-60 61 - 80 Weighted average age
given in Annex ZB per type
Towels
Pillowcases
Sheets
Weighted overall average age
---------------------- Page: 9 ----------------------
- 9 - EN 60456:1999/A13:2003
Annex A
Add after the second paragraph:
Water inlet sieves have to be cleaned regularly.
Add after Table A.2:
For the 60 °C cotton program the following extra conditions shall be fulfilled:
- total water consumption: (98 + 3) l;
- final moisture content: (85 + 4) %, standard deviation < 4 %;
- energy consumption: (1,8 + 0,1) kWh.
NOTE If these values are exceeded reason may be found in laboratory practice of treating the load.
Annex F
Replace under item g) in the first dash 1,08 by 1,06.
Add:
NOTE The factor of 1,06 was determined to be accurate for the defined load within MT14 of SC 59D.
---------------------- Page: 10 ----------------------
EN 60456:1999/A13:2003 - 10 -
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Replace the reference to IEC 60734 as follows:
Publication Year Title EN/HD Year
1) 2)
IEC 60734 - Household electrical appliances – EN 60734 2003
Performance – Hard water for testing
Add:
1) 2)
IEC 62053-21 - Electricity metering equi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.