SIST EN 4611-008:2012
(Main)Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between – 65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between – 65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
This European Standard specifies the characteristics of UV laser printable, nickel plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer XLETFE family for use in the on-board electrical systems of aircraft at operating temperatures between - 65 °C and 150 °C, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2 000 Hz. These cables are intended for use with additional protection in areas where combinations of high vibration, cable flexing and fluid contamination are normal e.g. undercarriage harnesses. In case of conflict between this standard and other referenced documents the requirements of this standard shall take precedence.
Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen für allgemeine Verwendung - XLETFE Familie - Teil 008: BP - Kupfer vernickelt - Betriebstemperaturen zwischen – 65 °C und 150 °C - Doppelt extrudierte Isolierung für externe Verwendung, mit zusätzlichem Schutz in Gebieten mit hoher Vibration (Schwingung), bei Bewegung und bei Kontakt mit Flüssigkeiten - UV-Laser bedruckbar - Produktnorm
Diese Europäische Norm legt die Merkmale eines mit UV-Laser bedruckbaren, vernickelten Kupferleiters für elektrische Leitungen der XLETFE-Familie (en: Crosslinked Ethylene Tetra Fluoro Ethylene) zur Verwendung im elektrischen Bordnetz von Luftfahrzeugen bei Betriebstemperaturen zwischen -65 °C und 150 °C, Betriebsspannungen mit einem Effektivwert von nicht mehr als 600 V und Frequenzen von maximal 2 000 Hz fest. Diese Leitungen dienen zur Verwendung mit einer zusätzlichen Schutzeinrichtung in Bereichen, in denen Kombinationen aus starken Schwingungen, Be¬wegung und Kontakt mit Flüssigkeiten normal sind, z. B. Fahr-werkskabelbäume. Bei Widersprüchen zwischen dieser Norm und anderen zitierten Dokumenten gelten die Anforderungen dieser Norm.
Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 008 : BP - Cuivre nickelé - Températures de fonctionnement comprises entre – 65 °C et 150 °C - Fil double isolé pour applications externes avec protection additionnelle pour zones à hautes vibrations, flexion de câbles et pollution des fluides - Marquable au laser UV - Norme de produit
Aeronavtika - Kabli, električni, za splošne namene, eno- in večžilni - Družina XLETFE - 008. del: Ponikljani baker - Obratovalne temperature med -65 °C in 150 °C - Dvojna ekstrudirana izolacija za zunanjo uporabo z dodatno zaščito na območjih z velikimi vibracijami (nihanjem), zvijanjem in v stiku s tekočinami - Potiskljiva z UV-laserjem - Standard za izdelek
Ta evropski standard določa lastnosti električnih kablov, potiskljivih z UV-laserjem, z vodnikom iz ponikljanega bakra iz družine kopolimerov, pridobljenih z mrežno polimerizacijo etilena in tetrafluoretilena (XLETFE), za uporabo v električnih sistemih na krovu letal pri obratovalnih temperaturah med –65 in 150 °C, obratovalnih napetostih, ki ne presegajo efektivne vrednosti 600 V, ter frekvencah, ki ne presegajo 2000 Hz. Ti kabli so namenjeni za uporabo z dodatno zaščito na območjih, kjer je običajna kombinacija velikih vibracij, zvijanja kablov in stika s tekočino, npr. v vezjih v voznem podstavku. V primeru neskladja med tem standardom in drugimi navedenimi dokumenti imajo prednost določila tega standarda.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen für allgemeine Verwendung - XLETFE Familie - Teil 008: BP - Kupfer vernickelt - Betriebstemperaturen zwischen – 65 °C und 150 °C - Doppelt extrudierte Isolierung für externe Verwendung, mit zusätzlichem Schutz in Gebieten mit hoher Vibration (Schwingung), bei Bewegung und bei Kontakt mit Flüssigkeiten - UV-Laser bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 008 : BP - Cuivre nickelé - Températures de fonctionnement comprises entre – 65 °C et 150 °C - Fil double isolé pour applications externes avec protection additionnelle pour zones à hautes vibrations, flexion de câbles et pollution des fluides - Marquable au laser UV - Norme de produitAerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between – 65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4611-008:2012SIST EN 4611-008:2012en,fr,de01-maj-2012SIST EN 4611-008:2012SLOVENSKI
STANDARD
SIST EN 4611-008:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4611-008
February 2012 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP -Nickel plated copper - Operating temperatures, between -65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 008 : BP - Cuivre nickelé - Températures de fonctionnement comprises entre -65 °C et 150 °C - Fil double isolé pour applications externes avec protection additionnelle pour zones à hautes vibrations, flexion de câbles et pollution des fluides - Marquable au laser UV - Norme de produit
Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen zur allgemeinen Verwendung, XLETFE-Familie -Teil 008: BP, Kupfer vernickelt, Betriebstemperaturen zwischen -65 °C und 150 °C, doppelt extrudierte Isolierung für offene Anwendungen, mit zusätzlichem Schutz für Bereiche mit hoher Vibration, Bewegung der Leitung und Kontakt mit Flüssigkeiten, UV-Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 17 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4611-008:2012: ESIST EN 4611-008:2012
EN 4611-008:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms, definitions, symbols and abbreviations .44 Materials and construction .44.1 Materials .44.2 Construction .54.3 Number of cores .54.4 Colour coding of cores .55 Required characteristics .66 Quality assurance .87 Designation .88 Identification and marking .99 Packaging, labelling and delivery lengths .910 Technical specification .9 SIST EN 4611-008:2012
EN 4611-008:2012 (E) 3 Foreword This document (EN 4611-008:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.