SIST EN 300 444 V2.2.1:2010
(Main)Digital Enhanced Cordless Telecommunications (DECT) - Generic Access Profile (GAP)
Digital Enhanced Cordless Telecommunications (DECT) - Generic Access Profile (GAP)
Update the standard to include new functions defined for NG DECT.
The present document specifies that set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Part (FP) and DECT Portable Part (PP) necessary for the support of the Generic Access Profile (GAP). The GAP is applicable to all DECT Portable radio Terminations (PT) and Fixed radio Terminations (FT) which under the scope of EN 300 176-2 [10] (i.e. 3,1 kHz telephony teleservice) and specifies the minimum functionality that is supported by all other 3,1 kHz voice profiles. The objective of the present document is to ensure the Air Interface (AI) inter-operability of DECT equipment capable of 3,1 kHz telephony applications, in such a way that any DECT PT conforming to the procedures described in the present document is inter-operable with any DECT FT conforming to the procedures described in the present document. The profile consists of the minimum mandatory requirements that allow a 3,1 kHz teleservice connection to be established, maintained and released between a FT and a PT with the appropriate access rights, irrespective of whether the FP provides residential, business or public access services. In addition, the present document defines the features, services, procedures etc. for both the FT and the PT, which are provision mandatory either in the PT or in the FT, as well as some elements that are provision optional but still process mandatory. Mobility Management (MM) procedures at the DECT AI to support incoming calls and outgoing calls are included. Inter-working between the FT and the attached network is outside the scope of the present document.
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Profil generičnega dostopa (GAP)
Pričujoči dokument določa, da je potrebna garnitura tehničnih zahtev za fiksni del (FP) in prenosni del (PP) digitalnih izboljšanih brezvrvičnih telekomunikacij (DECT) za podporo profila generičnega dostopa (GAP). GAP velja za vse DECT prenosne radijske priključke (PT) in fiksne radijske priključke (FT), ki se nahajajo v področju uporabe EN 300 176-2 [10] (t.i. 3,1 kHz telefonska telestoritev) in določa minimalno funkcionalnost, ki je podprta z vsemi ostalim 3,1 kHz glasovnimi profili. Cilj pričujočega dokumenta je zagotoviti interoperabilnost DECT opreme radijskega vmesnika (AI), zmožne 3,1 kHz telefonskih uporab na tak način, da lahko vsak DECT PT, ki hoče biti v skladu z postopki, opisanimi v pričujočem dokumentu, medsebojno deluje z vsakim DECT FT, ki hoče biti v skladu z postopki, opisanimi v pričujočem dokumentu. Profil je sestavljen iz minimalnih obveznih zahtev, ki omogočajo 3,1 kHz vzpostavitev, vzdrževanje in sprostitev povezave telestoritve, med FT in PT z ustreznimi dostopnimi pravicami, ne glede na to, ali FP zagotavlja bivalne, poslovne ali javne dostopne storitve. Poleg tega pričujoči dokument določa značilnosti, storitve, postopke itd. za tako FT kot PT, ki so obvezna določila ali za PT ali FT, kot tudi nekateri elementi, ki so glede na določilo neobvezni, vendar obvezni za postopek. Postopki upravljanja mobilnosti (MM) pri DECT AI za podporo vhodnih in izhodnih klicev so vključeni. Medsebojno delovanje med FT in priključenim omrežjem je zunaj področja uporabe pričujočega dokumenta.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 300 444 V2.2.1:2010
01-oktober-2010
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 3URILOJHQHULþQHJD
GRVWRSD *$3
Digital Enhanced Cordless Telecommunications (DECT) - Generic Access Profile (GAP)
Ta slovenski standard je istoveten z: EN 300 444 Version 2.2.1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST EN 300 444 V2.2.1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 444 V2.2.1:2010
---------------------- Page: 2 ----------------------
SIST EN 300 444 V2.2.1:2010
ETSI EN 300 444 V2.2.1 (2010-06)
European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP)
---------------------- Page: 3 ----------------------
SIST EN 300 444 V2.2.1:2010
2 ETSI EN 300 444 V2.2.1 (2010-06)
Reference
REN/DECT-000255
Keywords
access, DECT, generic, profile, mobility, radio,
synchronization, TDD, TDMA, IMT-2000
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 444 V2.2.1:2010
3 ETSI EN 300 444 V2.2.1 (2010-06)
Contents
Intellectual Property Rights . 9
Foreword . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Feature definitions . 15
4.1 NetWorK (NWK) features . 16
4.2 Speech coding and audio features . 17
4.3 Application features . 18
5 Service definitions . 19
5.1 DLC service definitions . 19
5.2 MAC service definitions . 19
6 Inter-operability requirements . 20
6.1 General . 20
6.2 NWK features . 21
6.3 DLC services . 22
6.4 MAC services . 22
6.5 PHysical Layer (PHL) services . 23
6.6 Application features . 23
6.7 Speech coding and audio features . 23
6.8 Feature/service to procedure mapping . 24
6.8.1 NWK feature to procedure mapping . 24
6.8.2 DLC service to procedure mapping . 26
6.8.3 MAC service to procedure mapping . 27
6.8.4 Application feature to procedure mapping . 28
6.8.5 Speech coding and audio feature to procedure mapping. 28
6.9 General requirements . 28
6.9.1 NWK layer message contents . 28
6.9.2 Transaction identifier . 28
6.9.3 Length of a NWK layer message . 28
6.9.4 Handling of error and exception conditions . 28
6.9.5 GAP default setup attributes . 29
6.9.6 Coexistence of MM and CC procedures . 29
6.9.7 Coding rules for information elements . 29
7 Procedure description . 30
8 NWK layer procedures . 30
8.1 Summary of outgoing call messages, normal cases . 30
8.2 Outgoing call request . 32
8.2.1 Associated procedures . 32
8.2.1.1 Timer P- management . 32
8.2.2 Exceptional cases . 33
8.2.2.1 Timer P- expiry . 33
8.2.2.2 PT releases the outgoing call request . 33
8.2.2.3 FT rejects the outgoing call request . 34
8.3 Overlap sending . 34
8.3.1 Associated procedure . 35
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 444 V2.2.1:2010
4 ETSI EN 300 444 V2.2.1 (2010-06)
8.3.1.1 Timer F- management . 35
8.3.2 Exceptional cases . 35
8.3.2.1 PT releases the outgoing call request . 35
8.3.2.2 FT rejects the outgoing call request . 35
8.3.2.3 Timer F- expiry . 36
8.3.2.4 FT releases the outgoing call request . 36
8.4 Outgoing call proceeding . 36
8.4.1 Exceptional cases . 37
8.4.1.1 PT releases the outgoing call request . 37
8.4.1.2 FT releases the outgoing call request . 37
8.5 Outgoing call confirmation. 38
8.5.1 Exceptional cases . 38
8.5.1.1 PT releases the outgoing call request . 38
8.5.1.2 FT releases the outgoing call request . 39
8.6 Outgoing call connection . 39
8.7 Normal call release . 40
8.7.1 Associated procedures . 40
8.7.1.1 Timer P- management . 40
8.7.1.2 Timer F- management . 41
8.7.2 Exceptional cases . 41
8.7.2.1 Release collisions . 41
8.7.2.2 Timer F- expiry . 42
8.7.2.3 Timer P- expiry . 42
8.8 Abnormal call release . 42
8.9 Partial release . 43
8.10 Sending keypad information. 44
8.11 Summary of incoming call related messages, normal cases . 45
8.12 Incoming call request . 46
8.12.1 Associated procedure . 47
8.12.1.1 Timer F- management . 47
8.12.2 Exceptional cases . 48
8.12.2.1 FT releases the incoming call request . 48
8.12.2.2 PT rejects the incoming call request . 48
8.12.2.3 Timer F- expiry . 49
8.12.3 Collective and group ringing . 49
8.13 Incoming call confirmation . 49
8.13.1 Exceptional cases . 50
8.13.1.1 FT releases the incoming call transaction . 50
8.13.1.2 PT releases the incoming call transaction . 50
8.14 PT alerting . 51
8.15 Incoming call connection . 51
8.15.1 Associated procedure . 52
8.15.1.1 Timer P- management . 52
8.15.2 Exceptional cases . 52
8.15.2.1 FT releases the incoming call transaction . 52
8.15.2.2 PT releases the incoming call transaction . 53
8.15.2.3 Timer P- expiry . 53
8.16 Display . 54
8.17 Terminal capability indication . 54
8.18 Internal call setup . 55
8.19 Internal call keypad . 55
8.20 Service call setup . 56
8.21 Service call keypad . 56
8.22 Identification of PP . 56
8.22.1 Associated procedure . 57
8.22.1.1 Timer F- management . 57
8.22.2 Exceptional cases . 57
8.22.2.1 Identity not existing in the PT . 57
8.22.2.2 Timer F- expiry . 57
8.23 Authentication of FT . 58
8.23.1 Associated procedure . 58
8.23.1.1 Timer P- management . 58
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 444 V2.2.1:2010
5 ETSI EN 300 444 V2.2.1 (2010-06)
8.23.2 Exceptional cases . 59
8.23.2.1 Authentication algorithm/key not supported . 59
8.23.2.2 Authentication challenge RES has wrong value . 59
8.23.2.3 Timer P- expiry . 59
8.24 Authentication of PP . 60
8.24.1 Associated procedure . 61
8.24.1.1 Timer F- management . 61
8.24.2 Exceptional cases . 61
8.24.2.1 Authentication algorithm/key not supported . 61
8.24.2.2 Timer F- expiry . 61
8.25 Authentication of user . 61
8.25.1 Associated procedure . 62
8.25.1.1 Timer F- management . 62
8.25.2 Exceptional cases . 62
8.25.2.1 Authentication algorithm/key not supported . 62
8.25.2.2 Timer F- expiry . 62
8.26 Incrementing the ZAP value . 62
8.27 Storing the DCK . 63
8.28 Location registration. 64
8.28.1 Associated procedures . 65
8.28.1.1 Timer P- management . 65
8.28.1.2 Timer F- management . 65
8.28.2 Exceptional cases . 66
8.28.2.1 FT rejects the location registration procedure . 66
8.28.2.2 Failure of location registration procedure . 66
8.28.2.3 PT rejects the identity assignment . 66
8.28.2.4 Timer F- expiry. 67
8.29 Location update . 67
8.30 Obtaining access rights . 68
8.30.1 Associated procedure . 69
8.30.1.1 Timer P- management . 69
8.30.2 Exceptional cases . 69
8.30.2.1 FT rejects the access rights . 69
8.30.2.2 Timer P- expiry. 70
8.31 FT terminating access rights . 70
8.31.1 Associated procedure . 71
8.31.1.1 Timer F- management . 71
8.31.2 Exceptional cases . 71
8.31.2.1 PT rejects the termination request . 71
8.31.2.2 Timer F- expiry. 71
8.32 Key allocation . 72
8.32.1 Associated procedures . 73
8.32.1.1 Timer F- management . 73
8.32.1.2 Timer P- management . 73
8.32.2 Exceptional cases . 73
8.32.2.1 Timer F- expiry . 73
8.32.2.2 Timer P- expiry . 73
8.32.2.3 Allocation-type element is unacceptable . 74
8.32.2.4 Authentication of PT fails . 74
8.32.2.5 Authentication of FT fails . 74
8.33 Cipher-switching initiated by FT . 75
8.33.1 Associated procedure . 76
8.33.1.1 Timer F- management . 76
8.33.2 Exceptional cases . 76
8.33.2.1 PT rejects the cipher request .
...
ETSI EN 300 444 V2.2.1 (2010-06)
European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP)
---------------------- Page: 1 ----------------------
2 ETSI EN 300 444 V2.2.1 (2010-06)
Reference
REN/DECT-000255
Keywords
access, DECT, generic, profile, mobility, radio,
synchronization, TDD, TDMA, IMT-2000
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 444 V2.2.1 (2010-06)
Contents
Intellectual Property Rights . 9
Foreword . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Feature definitions . 15
4.1 NetWorK (NWK) features . 16
4.2 Speech coding and audio features . 17
4.3 Application features . 18
5 Service definitions . 19
5.1 DLC service definitions . 19
5.2 MAC service definitions . 19
6 Inter-operability requirements . 20
6.1 General . 20
6.2 NWK features . 21
6.3 DLC services . 22
6.4 MAC services . 22
6.5 PHysical Layer (PHL) services . 23
6.6 Application features . 23
6.7 Speech coding and audio features . 23
6.8 Feature/service to procedure mapping . 24
6.8.1 NWK feature to procedure mapping . 24
6.8.2 DLC service to procedure mapping . 26
6.8.3 MAC service to procedure mapping . 27
6.8.4 Application feature to procedure mapping . 28
6.8.5 Speech coding and audio feature to procedure mapping. 28
6.9 General requirements . 28
6.9.1 NWK layer message contents . 28
6.9.2 Transaction identifier . 28
6.9.3 Length of a NWK layer message . 28
6.9.4 Handling of error and exception conditions . 28
6.9.5 GAP default setup attributes . 29
6.9.6 Coexistence of MM and CC procedures . 29
6.9.7 Coding rules for information elements . 29
7 Procedure description . 30
8 NWK layer procedures . 30
8.1 Summary of outgoing call messages, normal cases . 30
8.2 Outgoing call request . 32
8.2.1 Associated procedures . 32
8.2.1.1 Timer P- management . 32
8.2.2 Exceptional cases . 33
8.2.2.1 Timer P- expiry . 33
8.2.2.2 PT releases the outgoing call request . 33
8.2.2.3 FT rejects the outgoing call request . 34
8.3 Overlap sending . 34
8.3.1 Associated procedure . 35
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 444 V2.2.1 (2010-06)
8.3.1.1 Timer F- management . 35
8.3.2 Exceptional cases . 35
8.3.2.1 PT releases the outgoing call request . 35
8.3.2.2 FT rejects the outgoing call request . 35
8.3.2.3 Timer F- expiry . 36
8.3.2.4 FT releases the outgoing call request . 36
8.4 Outgoing call proceeding . 36
8.4.1 Exceptional cases . 37
8.4.1.1 PT releases the outgoing call request . 37
8.4.1.2 FT releases the outgoing call request . 37
8.5 Outgoing call confirmation. 38
8.5.1 Exceptional cases . 38
8.5.1.1 PT releases the outgoing call request . 38
8.5.1.2 FT releases the outgoing call request . 39
8.6 Outgoing call connection . 39
8.7 Normal call release . 40
8.7.1 Associated procedures . 40
8.7.1.1 Timer P- management . 40
8.7.1.2 Timer F- management . 41
8.7.2 Exceptional cases . 41
8.7.2.1 Release collisions . 41
8.7.2.2 Timer F- expiry . 42
8.7.2.3 Timer P- expiry . 42
8.8 Abnormal call release . 42
8.9 Partial release . 43
8.10 Sending keypad information. 44
8.11 Summary of incoming call related messages, normal cases . 45
8.12 Incoming call request . 46
8.12.1 Associated procedure . 47
8.12.1.1 Timer F- management . 47
8.12.2 Exceptional cases . 48
8.12.2.1 FT releases the incoming call request . 48
8.12.2.2 PT rejects the incoming call request . 48
8.12.2.3 Timer F- expiry . 49
8.12.3 Collective and group ringing . 49
8.13 Incoming call confirmation . 49
8.13.1 Exceptional cases . 50
8.13.1.1 FT releases the incoming call transaction . 50
8.13.1.2 PT releases the incoming call transaction . 50
8.14 PT alerting . 51
8.15 Incoming call connection . 51
8.15.1 Associated procedure . 52
8.15.1.1 Timer P- management . 52
8.15.2 Exceptional cases . 52
8.15.2.1 FT releases the incoming call transaction . 52
8.15.2.2 PT releases the incoming call transaction . 53
8.15.2.3 Timer P- expiry . 53
8.16 Display . 54
8.17 Terminal capability indication . 54
8.18 Internal call setup . 55
8.19 Internal call keypad . 55
8.20 Service call setup . 56
8.21 Service call keypad . 56
8.22 Identification of PP . 56
8.22.1 Associated procedure . 57
8.22.1.1 Timer F- management . 57
8.22.2 Exceptional cases . 57
8.22.2.1 Identity not existing in the PT . 57
8.22.2.2 Timer F- expiry . 57
8.23 Authentication of FT . 58
8.23.1 Associated procedure . 58
8.23.1.1 Timer P- management . 58
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 444 V2.2.1 (2010-06)
8.23.2 Exceptional cases . 59
8.23.2.1 Authentication algorithm/key not supported . 59
8.23.2.2 Authentication challenge RES has wrong value . 59
8.23.2.3 Timer P- expiry . 59
8.24 Authentication of PP . 60
8.24.1 Associated procedure . 61
8.24.1.1 Timer F- management . 61
8.24.2 Exceptional cases . 61
8.24.2.1 Authentication algorithm/key not supported . 61
8.24.2.2 Timer F- expiry . 61
8.25 Authentication of user . 61
8.25.1 Associated procedure . 62
8.25.1.1 Timer F- management . 62
8.25.2 Exceptional cases . 62
8.25.2.1 Authentication algorithm/key not supported . 62
8.25.2.2 Timer F- expiry . 62
8.26 Incrementing the ZAP value . 62
8.27 Storing the DCK . 63
8.28 Location registration. 64
8.28.1 Associated procedures . 65
8.28.1.1 Timer P- management . 65
8.28.1.2 Timer F- management . 65
8.28.2 Exceptional cases . 66
8.28.2.1 FT rejects the location registration procedure . 66
8.28.2.2 Failure of location registration procedure . 66
8.28.2.3 PT rejects the identity assignment . 66
8.28.2.4 Timer F- expiry. 67
8.29 Location update . 67
8.30 Obtaining access rights . 68
8.30.1 Associated procedure . 69
8.30.1.1 Timer P- management . 69
8.30.2 Exceptional cases . 69
8.30.2.1 FT rejects the access rights . 69
8.30.2.2 Timer P- expiry. 70
8.31 FT terminating access rights . 70
8.31.1 Associated procedure . 71
8.31.1.1 Timer F- management . 71
8.31.2 Exceptional cases . 71
8.31.2.1 PT rejects the termination request . 71
8.31.2.2 Timer F- expiry. 71
8.32 Key allocation . 72
8.32.1 Associated procedures . 73
8.32.1.1 Timer F- management . 73
8.32.1.2 Timer P- management . 73
8.32.2 Exceptional cases . 73
8.32.2.1 Timer F- expiry . 73
8.32.2.2 Timer P- expiry . 73
8.32.2.3 Allocation-type element is unacceptable . 74
8.32.2.4 Authentication of PT fails . 74
8.32.2.5 Authentication of FT fails . 74
8.33 Cipher-switching initiated by FT . 75
8.33.1 Associated procedure . 76
8.33.1.1 Timer F- management . 76
8.33.2 Exceptional cases . 76
8.33.2.1 PT rejects the cipher request . 76
8.33.2.2 Timer F- expiry . 76
8.34 Cipher-switching initiated by PT . 77
8.34.1 Associated procedure . 78
8.34.1.1 Timer P- management . 78
8.34.2 Exceptional cases . 78
8.34.2.1 FT rejects the cipher request .
...
Final draft ETSI EN 300 444 V2.2.0 (2010-02)
European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP)
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 300 444 V2.2.0 (2010-02)
Reference
REN/DECT-000255
Keywords
access, DECT, generic, profile, mobility, radio,
synchronization, TDD, TDMA, IMT-2000
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 300 444 V2.2.0 (2010-02)
Contents
Intellectual Property Rights . 9
Foreword . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Feature definitions . 16
4.1 NetWorK (NWK) features . 16
4.2 Speech coding and audio features . 17
4.3 Application features . 19
5 Service definitions . 19
5.1 DLC service definitions . 19
5.2 MAC service definitions . 20
6 Inter-operability requirements . 21
6.1 General . 21
6.2 NWK features . 21
6.3 DLC services . 22
6.4 MAC services . 23
6.5 PHysical Layer (PHL) services . 23
6.6 Application features . 23
6.7 Speech coding and audio features . 24
6.8 Feature/service to procedure mapping . 24
6.8.1 NWK feature to procedure mapping . 24
6.8.2 DLC service to procedure mapping . 27
6.8.3 MAC service to procedure mapping . 28
6.8.4 Application feature to procedure mapping . 29
6.8.5 Speech coding and audio feature to procedure mapping. 29
6.9 General requirements . 29
6.9.1 NWK layer message contents . 29
6.9.2 Transaction identifier . 29
6.9.3 Length of a NWK layer message . 29
6.9.4 Handling of error and exception conditions . 29
6.9.5 GAP default setup attributes . 30
6.9.6 Coexistence of MM and CC procedures . 30
6.9.7 Coding rules for information elements . 30
7 Procedure description . 31
8 NWK layer procedures . 31
8.1 Summary of outgoing call messages, normal cases . 31
8.2 Outgoing call request . 33
8.2.1 Associated procedures . 33
8.2.1.1 Timer P- management . 33
8.2.2 Exceptional cases . 34
8.2.2.1 Timer P- expiry . 34
8.2.2.2 PT releases the outgoing call request . 34
8.2.2.3 FT rejects the outgoing call request . 35
8.3 Overlap sending . 35
8.3.1 Associated procedure . 36
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 300 444 V2.2.0 (2010-02)
8.3.1.1 Timer F- management . 36
8.3.2 Exceptional cases . 36
8.3.2.1 PT releases the outgoing call request . 36
8.3.2.2 FT rejects the outgoing call request . 36
8.3.2.3 Timer F- expiry . 37
8.3.2.4 FT releases the outgoing call request . 37
8.4 Outgoing call proceeding . 37
8.4.1 Exceptional cases . 38
8.4.1.1 PT releases the outgoing call request . 38
8.4.1.2 FT releases the outgoing call request . 38
8.5 Outgoing call confirmation. 39
8.5.1 Exceptional cases . 39
8.5.1.1 PT releases the outgoing call request . 39
8.5.1.2 FT releases the outgoing call request . 40
8.6 Outgoing call connection . 40
8.7 Normal call release . 41
8.7.1 Associated procedures . 41
8.7.1.1 Timer P- management . 41
8.7.1.2 Timer F- management . 42
8.7.2 Exceptional cases . 42
8.7.2.1 Release collisions . 42
8.7.2.2 Timer F- expiry . 43
8.7.2.3 Timer P- expiry . 43
8.8 Abnormal call release . 43
8.9 Partial release . 44
8.10 Sending keypad information. 45
8.11 Summary of incoming call related messages, normal cases . 46
8.12 Incoming call request . 47
8.12.1 Associated procedure . 48
8.12.1.1 Timer F- management . 48
8.12.2 Exceptional cases . 49
8.12.2.1 FT releases the incoming call request . 49
8.12.2.2 PT rejects the incoming call request . 49
8.12.2.3 Timer F- expiry . 50
8.12.3 Collective and group ringing . 50
8.13 Incoming call confirmation . 50
8.13.1 Exceptional cases . 51
8.13.1.1 FT releases the incoming call transaction . 51
8.13.1.2 PT releases the incoming call transaction . 51
8.14 PT alerting . 52
8.15 Incoming call connection . 52
8.15.1 Associated procedure . 53
8.15.1.1 Timer P- management . 53
8.15.2 Exceptional cases . 53
8.15.2.1 FT releases the incoming call transaction . 53
8.15.2.2 PT releases the incoming call transaction . 54
8.15.2.3 Timer P- expiry . 54
8.16 Display . 55
8.17 Terminal capability indication . 55
8.18 Internal call setup . 56
8.19 Internal call keypad . 56
8.20 Service call setup . 57
8.21 Service call keypad . 57
8.22 Identification of PP . 57
8.22.1 Associated procedure . 58
8.22.1.1 Timer F- management . 58
8.22.2 Exceptional cases . 58
8.22.2.1 Identity not existing in the PT . 58
8.22.2.2 Timer F- expiry . 58
8.23 Authentication of FT . 59
8.23.1 Associated procedure . 59
8.23.1.1 Timer P- management . 59
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 300 444 V2.2.0 (2010-02)
8.23.2 Exceptional cases . 60
8.23.2.1 Authentication algorithm/key not supported . 60
8.23.2.2 Authentication challenge RES has wrong value . 60
8.23.2.3 Timer P- expiry . 60
8.24 Authentication of PP . 61
8.24.1 Associated procedure . 62
8.24.1.1 Timer F- management . 62
8.24.2 Exceptional cases . 62
8.24.2.1 Authentication algorithm/key not supported . 62
8.24.2.2 Timer F- expiry . 62
8.25 Authentication of user . 62
8.25.1 Associated procedure . 63
8.25.1.1 Timer F- management . 63
8.25.2 Exceptional cases . 63
8.25.2.1 Authentication algorithm/key not supported . 63
8.25.2.2 Timer F- expiry . 63
8.26 Incrementing the ZAP value . 63
8.27 Storing the DCK . 64
8.28 Location registration. 65
8.28.1 Associated procedures . 66
8.28.1.1 Timer P- management . 66
8.28.1.2 Timer F- management . 66
8.28.2 Exceptional cases . 67
8.28.2.1 FT rejects the location registration procedure . 67
8.28.2.2 Failure of location registration procedure . 67
8.28.2.3 PT rejects the identity assignment . 67
8.28.2.4 Timer F- expiry. 68
8.29 Location update . 68
8.30 Obtaining access rights . 69
8.30.1 Associated procedure . 70
8.30.1.1 Timer P- management . 70
8.30.2 Exceptional cases . 70
8.30.2.1 FT rejects the access rights . 70
8.30.2.2 Timer P- expiry. 71
8.31 FT terminating access rights . 71
8.31.1 Associated procedure . 72
8.31.1.1 Timer F- management . 72
8.31.2 Exceptional cases . 72
8.31.2.1 PT rejects the termination request . 72
8.31.2.2 Timer F- expiry. 72
8.32 Key allocation . 73
8.32.1 Associated procedures . 74
8.32.1.1 Timer F- management . 74
8.32.1.2 Timer P- management . 74
8.32.2 Exceptional cases . 74
8.32.2.1 Timer F- expiry . 74
8.32.2.2 Timer P- expiry . 74
8.32.2.3 Allocation-type element is unacceptable . 75
8.32.2.4 Authentication of PT fails . 75
8.32.2.5 Authentication of FT fails . 75
8.33 Cipher-switching initiated by FT . 76
8.33.1 Associated procedure . 77
8.33.1.1 Timer F- management . 77
8.33.2 Exceptional cases . 77
8.33.2.1 PT rejects the cipher request . 77
8.33.2.2 Timer F- expiry . 77
8.34 Cipher-switching initiated by PT . 78
8.34.1 Associated procedure . 79
8.34.1.1 Timer P- management . 79
8.34.2 Exceptional cases . 79
8.34.2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.