oSIST prEN ISO 13947:2024

Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder- forged specimen (ISO/DIS 13947:2023)

ISO 13947:2011 specifies a metallographic method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. The test method covers repress powder-forged test specimens in which there has been minimal lateral flow (< 1 %). The core region of the powder-forged test specimen contains no porosity detectable at 100 ´ magnification.
This test method can also be used to determine the non-metallic inclusion content of powder-forged steel parts. However, in parts where there has been a significant amount of material flow, the near-neighbour separation distance needs to be changed, or the inclusion sizes agreed between the parties need to be adjusted.
This test method is not suitable for determining the non-metallic inclusion level of parts that have been forged such that the core region contains porosity. At the magnification used for this test method, residual porosity is hard to distinguish from inclusions. Too much residual porosity makes a meaningful assessment of the inclusion population impossible.
This test method can be applied to materials that contain manganese suifide (admixed or prealloyed), provided the near-neighbour separation distance is changed from 30 µm to 15 µm.

Metallpulver - Prüfverfahren zur Bestimmung von nichtmetallischen Einschlüssen in Metallpulvern anhand einer pulvergeschmiedeten Probe (ISO/DIS 13947:2023)

Poudres métalliques - Méthode d’essai relative à la détermination des inclusions non métalliques dans les poudres métalliques à l’aide d’une éprouvette frittée-forgée (ISO/DIS 13947:2023)

Kovinski prah - Preskusna metoda za določanje nekovinskih delcev v kovinskih praških z uporabo kovanega vzorca (ISO/DIS 13947:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Feb-2024
• ICS: 77.160 - Powder metallurgy
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 03-Jan-2024
• Due Date: 22-May-2024
• Ref Project: prEN ISO 13947 - Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO/DIS 13947:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13947:2024
01-februar-2024
Kovinski prah - Preskusna metoda za določanje nekovinskih delcev v kovinskih
praških z uporabo kovanega vzorca (ISO/DIS 13947:2023)
Metallic powders - Test method for the determination of non-metallic inclusions in metal
powders using a powder- forged specimen (ISO/DIS 13947:2023)
Metallpulver - Prüfverfahren zur Bestimmung von nichtmetallischen Einschlüssen in
Metallpulvern anhand einer pulvergeschmiedeten Probe (ISO/DIS 13947:2023)
Poudres métalliques - Méthode d’essai relative à la détermination des inclusions non
métalliques dans les poudres métalliques à l’aide d’une éprouvette frittée-forgée
(ISO/DIS 13947:2023)
Ta slovenski standard je istoveten z: prEN ISO 13947
ICS:
77.160 Metalurgija prahov Powder metallurgy
oSIST prEN ISO 13947:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13947:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13947:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13947
ISO/TC 119/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-12-11 2024-03-04
Metallic powders — Test method for the determination of
non-metallic inclusions in metal powders using a powder-
forged specimen
Poudres métalliques — Détermination de la teneur en inclusions non métalliques dans les poudres
métalliques à l'aide d'une éprouvette forgée de poudre
ICS: 77.160
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13947:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13947:2024
ISO/DIS 13947:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13947
ISO/TC 119/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:

Metallic powders — Test method for the determination of
non-metallic inclusions in metal powders using a powder-
forged specimen
Poudres métalliques — Détermination de la teneur en inclusions non métalliques dans les poudres
métalliques à l'aide d'une éprouvette forgée de poudre
ICS: 77.160
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 13947:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13947:2024
ISO/DIS 13947:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references .
...