SIST EN 319 412-3 V1.2.1:2020
(Main)Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 3: Certificate profile for certificates issued to legal persons
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 3: Certificate profile for certificates issued to legal persons
The present document specifies a certificate profile for certificates issued to legal persons. The profile defined in the
present document builds on requirements defined in ETSI EN 319 412-2 [2].
The present document supports the requirements of EU qualified certificates as specified in the Regulation (EU)
No 910/2014 [i.3] as well as other forms of certificate.
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 3. del: Profil potrdila za potrdila, ki se izdajajo pravnim osebam
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 319 412-3 V1.2.1:2020
01-oktober-2020
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 3. del: Profil potrdila za
potrdila, ki se izdajajo pravnim osebam
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 3: Certificate
profile for certificates issued to legal persons
Ta slovenski standard je istoveten z: ETSI EN 319 412-3 V1.2.1 (2020-07)
ICS:
03.080.99 Druge storitve Other services
35.040.01 Kodiranje informacij na Information coding in general
splošno
SIST EN 319 412-3 V1.2.1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 319 412-3 V1.2.1:2020
---------------------- Page: 2 ----------------------
SIST EN 319 412-3 V1.2.1:2020
ETSI EN 319 412-3 V1.2.1 (2020-07)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 3: Certificate profile for certificates issued
to legal persons
---------------------- Page: 3 ----------------------
SIST EN 319 412-3 V1.2.1:2020
2 ETSI EN 319 412-3 V1.2.1 (2020-07)
Reference
REN/ESI-0019412-3v121
Keywords
electronic signature, IP, profile, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 319 412-3 V1.2.1:2020
3 ETSI EN 319 412-3 V1.2.1 (2020-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic requirements . 7
4.2 Basic certificate fields . 7
4.2.1 Subject . 7
4.3 Standard certificate extensions . 8
4.3.1 Key usage. 8
Annex A (informative): Change History . 9
History . 10
ETSI
---------------------- Page: 5 ----------------------
SIST EN 319 412-3 V1.2.1:2020
4 ETSI EN 319 412-3 V1.2.1 (2020-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 3 of multi-part deliverable covering the Certificate Profiles. Full details of the entire series
can be found in part 1 [i.4].
National transposition dates
Date of adoption of this EN: 6 July 2020
Date of latest announcement of this EN (doa): 31 October 2020
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 April 2021
Date of withdrawal of any conflicting National Standard (dow): 30 April 2021
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETS
...
ETSI EN 319 412-3 V1.2.1 (2020-07)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 3: Certificate profile for certificates issued
to legal persons
---------------------- Page: 1 ----------------------
2 ETSI EN 319 412-3 V1.2.1 (2020-07)
Reference
REN/ESI-0019412-3v121
Keywords
electronic signature, IP, profile, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 319 412-3 V1.2.1 (2020-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic requirements . 7
4.2 Basic certificate fields . 7
4.2.1 Subject . 7
4.3 Standard certificate extensions . 8
4.3.1 Key usage. 8
Annex A (informative): Change History . 9
History . 10
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 319 412-3 V1.2.1 (2020-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 3 of multi-part deliverable covering the Certificate Profiles. Full details of the entire series
can be found in part 1 [i.4].
National transposition dates
Date of adoption of this EN: 6 July 2020
Date of latest announcement of this EN (doa): 31 October 2020
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 April 2021
Date of withdrawal of any conflicting National Standard (dow): 30 April 2021
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 319 412-3 V1.2.1 (2020-07)
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU-T X.509 |
...
Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 3: Certificate profile for certificates issued
to legal persons
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
Reference
REN/ESI-0019412-3v121
Keywords
electronic signature, IP, profile, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic requirements . 7
4.2 Basic certificate fields . 7
4.2.1 Subject . 7
4.3 Standard certificate extensions . 8
4.3.1 Key usage. 8
Annex A (informative): Change History . 9
History . 10
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN
Approval Procedure.
The present document is part 3 of multi-part deliverable covering the Certificates Profiles. Full details of the entire
series can be found in part 1 [i.4].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
Introduction
ITU and ISO issued standards for certification of public keys in Recommendation ITU-T X.509 | ISO/IEC 9594-
...
SLOVENSKI STANDARD
oSIST prEN 319 412-3 V1.1.3:2020
01-junij-2020
Elektronski podpisi in infrastruktura (ESI) - Profili potrdil - 3. del: Profil potrdila za
potrdila, ki se izdajajo pravnim osebam
Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 3: Certificate
profile for certificates issued to legal persons
Ta slovenski standard je istoveten z: ETSI EN 319 412-3 V1.1.3 (2020-04)
ICS:
03.080.99 Druge storitve Other services
35.040.01 Kodiranje informacij na Information coding in general
splošno
oSIST prEN 319 412-3 V1.1.3:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 319 412-3 V1.1.3:2020
---------------------- Page: 2 ----------------------
oSIST prEN 319 412-3 V1.1.3:2020
Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
EUROPEAN STANDARD
Electronic Signatures and Infrastructures (ESI);
Certificate Profiles;
Part 3: Certificate profile for certificates issued
to legal persons
---------------------- Page: 3 ----------------------
oSIST prEN 319 412-3 V1.1.3:2020
2 Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
Reference
REN/ESI-0019412-3v121
Keywords
electronic signature, IP, profile, security,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 319 412-3 V1.1.3:2020
3 Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Profile requirements . 7
4.1 Generic requirements . 7
4.2 Basic certificate fields . 7
4.2.1 Subject . 7
4.3 Standard certificate extensions . 8
4.3.1 Key usage. 8
Annex A (informative): Change History . 9
History . 10
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 319 412-3 V1.1.3:2020
4 Draft ETSI EN 319 412-3 V1.1.3 (2020-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN
Approval Procedure.
The present document is part 3 of multi-part deliverable covering the Certificates Profiles. Full details of the entire
series can be found in part 1 [i.4].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.