SIST EN 302 885-3 V1.1.1:2011

• Abstract:

  The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels.; The present document also specifies technical characteristics, methods of measurement and required test results.; The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.3(e), which states that radio equipment within the scope of the present document shall be so constructed that:; "it supports certain features ensuring access to emergency services".; In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.1] will apply to equipment within the scope of the present document.

• Status: Published
• Publication Date: 16-Oct-2011
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 30-Sep-2011
• Due Date: 05-Dec-2011
• Completion Date: 17-Oct-2011
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Directive:

  ---

  TRRTP124 - Splošni akt o načrtu uporabe radijskih frekvenc (NURF-4)
• Ref Project: ETSI EN 302 885-3 V1.1.1 (2011-09) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive

Overview

SIST EN 302 885-3 V1.1.1:2011 is a harmonized European standard developed by the Slovenian Institute for Standardization (SIST) and ETSI. This document specifies the minimum technical characteristics and testing methods for portable Very High Frequency (VHF) radiotelephone equipment with integrated handheld Class D Digital Selective Calling (DSC). These devices are designed for the maritime mobile service and operate in VHF bands using either 25 kHz or 12.5 kHz channels. The standard ensures compliance with article 3.3(e) of the R&TTE Directive (1999/5/EC), which mandates features that enable access to emergency services.

Key Topics

• Scope of Equipment: The standard applies to portable VHF radiotelephones for maritime use, equipped with integrated Class D DSC. These radios must operate in the frequency bands allocated to maritime mobile services.
• Technical Characteristics: Defines essential performance requirements covering operational, technical, and environmental aspects, referencing detailed specifications in EN 302 885-1.
• Measurement Methods and Tests: Specifies how technical parameters should be measured (e.g., frequency deviation, audio frequency response, distortion, squelch behavior) and the necessary conformance tests for manufacturers.
• Environmental Testing: Requires equipment to undergo rigorous tests such as drop tests and assessments under dry heat, damp heat, and low temperature conditions to confirm durability and reliability in marine environments.
• Emergency Services Access: Ensures radiotelephone equipment includes features that facilitate access to emergency services, supporting maritime safety mandates within the EU.

Applications

Portable VHF radiotelephones with integrated Class D DSC are critical for:

• Maritime Safety and Distress Communication: Ensuring effective ship-to-ship and ship-to-shore communication, especially in emergency scenarios, aligning with the Global Maritime Distress and Safety System (GMDSS).
• Routine and Safety Communications: Supporting both urgent distress calls and regular operational communications on non-SOLAS vessels.
• Search and Rescue Operations: Providing reliable, interoperable communication tools for coordination during maritime emergencies.
• Compliance and Certification: Assisting manufacturers in demonstrating compliance with essential requirements under the R&TTE Directive, facilitating CE marking and market access within the European Economic Area.

Related Standards

The SIST EN 302 885-3 V1.1.1:2011 standard is part of a series and references several key documents:

• EN 302 885-1: Technical characteristics and methods of measurement for portable VHF radiotelephones with DSC.
• EN 302 885-2: Harmonized EN covering requirements under article 3.2 of the R&TTE Directive.
• TR 100 028-1: Guidance on uncertainties in the measurement of radio equipment characteristics.
• Directive 1999/5/EC (R&TTE Directive): Essential legal framework for radio equipment in the EU.
• EG 201 399: Guidance for producing harmonized standards under the R&TTE Directive.
• EC Decision 2004/71/EC: Requirements related to marine radio communication equipment for GMDSS.

Practical Value

By adhering to SIST EN 302 885-3 V1.1.1:2011, manufacturers and maritime operators ensure:

• Compliance with EU legal requirements, enabling international trade.
• Reliability and safety of portable maritime VHF radios in challenging sea conditions.
• Interoperability between vessels and rescue authorities, supporting coordinated response during maritime incidents.
• Market confidence in equipment performance and durability, facilitating global maritime commerce and safety.

For further information and updates, consult the official ETSI website and review referenced EN and EU legal documents to ensure ongoing compliance and industry best practices in maritime radiotelephone equipment.

Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive

2 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)

Reference
DEN/ERM-TG26-086-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 General, operational and technical requirements . 9
4.2.1 General and operational requirements . 9
4.2.1.1 Requirements . 9
4.2.1.2 Conformance . 9
4.2.2 Technical requirements . 9
4.2.2.1 Requirements . 9
4.2.2.2 Conformance . 9
4.3 Environmental requirements . 9
4.3.1 Drop test . 9
4.3.1.1 Definition . 9
4.3.1.2 Requirement . 9
4.3.1.3 Conformance . 9
4.3.2 Temperature tests . 9
4.3.2.1 Definition . 9
4.3.2.2 Dry heat . 9
4.3.2.2.1 Definition. 9
4.3.2.2.2 Requirement . 10
4.3.2.2.3 Conformance . 10
4.3.2.3 Damp heat . 10
4.3.2.3.1 Definition. 10
4.3.2.3.2 Requirement . 10
4.3.2.3.3 Conformance . 10
4.3.2.4 Low temperature . 10
4.3.2.4.1 Definition. 10
4.3.2.4.2 Requirement . 10
4.3.2.4.3 Conformance . 10
4.4 Conformance requirements . 10
4.4.1 Sensitivity of the modulator, including microphone . 10
4.4.1.1 Definition . 10
4.4.1.2 Limit . 10
4.4.1.3 Conformance . 10
4.4.2 Audio frequency response . 11
4.4.2.1 Definition . 11
4.4.2.2 Limit . 11
4.4.2.3 Conformance . 11
4.4.3 Audio frequency harmonic distortion of the emission . 11
4.4.3.1 Definition . 11
4.4.3.2 Limit . 11
4.4.3.3 Conformance . 11
4.4.4 Residual modulation of the transmitter . 11
4.4.4.1 Definition . 11
ETSI
4 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
4.4.4.2 Limit . 11
4.4.4.3 Conformance . 11
4.4.5 Harmonic distortion and rated audio-frequency output power . 11
4.4.5.1 Definition . 11
4.4.5.2 Limit . 11
4.4.5.3 Conformance . 11
4.4.6 Receiver audio frequency response . 12
4.4.6.1 Definition . 12
4.4.6.2 Limit . 12
4.4.6.3 Conformance . 12
4.4.7 Receiver noise and hum level . 12
4.4.7.1 Definition . 12
4.4.7.2 Limit . 12
4.4.7.3 Conformance . 12
4.4.8 Squelch operation . 12
4.4.8.1 Definition . 12
4.4.8.2 Limit . 12
4.4.8.3 Conformance . 12
4.4.9 Squelch hysteresis . 12
4.4.9.1 Definition . 12
4.4.9.2 Limit . 12
4.4.9.3 Conformance . 12
4.4.10 Receiver scanning efficiency . 13
4.4.10.1 Definition . 13
4.4.10.2 Limit . 13
4.4.10.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Test conditions, power supply and ambient temperatures . 13
5.2 Interpretation of the measurement results . 13
5.3 Essential radio test suites . 14
5.3.1 Environmental tests. 14
5.3.1.1 Introduction . 14
5.3.1.2 Procedure . 14
5.3.1.3 Performance check . 14
5.3.1.4 Drop test . 14
5.3.1.4.1 Definition. 14
5.3.1.4.2 Limit . 14
5.3.1.4.3 Conformance . 14
5.3.1.5 Temperature tests . 15
5.3.1.5.1 Dry heat . 15
5.3.1.5.1.1 Definition . 15
5.3.1.5.1.2 Limit . 15
5.3.1.5.1.3 Confor ma nce . 15
5.3.1.5.2 Damp heat . 15
5.3.1.5.2.1 Definition . 15
5.3.1.5.2.2 Limit . 15
5.3.1.5.2.3 Confor ma nce . 15
5.3.1.5.3 Low temperature . 15
5.3.1.5.3.1 Definition . 15
5.3.1.5.3.2 Limit . 15
5.3.1.5.3.3 Confor ma nce . 15
5.3.2 Conformance tests . 15
5.3.2.1 Sensitivity of the modulator, including microphone . 15
5.3.2.2 Audio frequency response . 15
5.3.2.3 Audio frequency harmonic distortion of the emission . 16
5.3.2.4 Residual modulation of the transmitter . 16
5.4 Other test suites . 16
5.4.1 General . 16
5.4.2 Harmonic distortion and rated audio-frequency output power . 16
5.4.3 Receiver audio frequency response . 16
5.4.4 Receiver noise and hum level . 16
ETSI
5 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
5.4.5 Squelch operation . 16
5.4.6 Squelch hysteresis . 16
5.4.7 Receiver scanning efficiency . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B (informative): The EN title in the official languages . 19
History . 20

ETSI
6 Final draft ETSI EN 302 885-3 V1.1.1 (2011-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards
One-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 3 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Di
...

Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 3: Harmonized EN covering the essential requirements
of article 3.3(e) of the R&TTE Directive

2 ETSI EN 302 885-3 V1.1.1 (2011-09)

Reference
DEN/ERM-TG26-086-3
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 302 885-3 V1.1.1 (2011-09)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 General, operational and technical requirements . 9
4.2.1 General and operational requirements . 9
4.2.1.1 Requirements . 9
4.2.1.2 Conformance . 9
4.2.2 Technical requirements . 9
4.2.2.1 Requirements . 9
4.2.2.2 Conformance . 9
4.3 Environmental requirements . 9
4.3.1 Drop test . 9
4.3.1.1 Definition . 9
4.3.1.2 Requirement . 9
4.3.1.3 Conformance . 9
4.3.2 Temperature tests . 9
4.3.2.1 Definition . 9
4.3.2.2 Dry heat . 9
4.3.2.2.1 Definition. 9
4.3.2.2.2 Requirement . 10
4.3.2.2.3 Conformance . 10
4.3.2.3 Damp heat . 10
4.3.2.3.1 Definition. 10
4.3.2.3.2 Requirement . 10
4.3.2.3.3 Conformance . 10
4.3.2.4 Low temperature . 10
4.3.2.4.1 Definition. 10
4.3.2.4.2 Requirement . 10
4.3.2.4.3 Conformance . 10
4.4 Conformance requirements . 10
4.4.1 Sensitivity of the modulator, including microphone . 10
4.4.1.1 Definition . 10
4.4.1.2 Limit . 10
4.4.1.3 Conformance . 10
4.4.2 Audio frequency response . 11
4.4.2.1 Definition . 11
4.4.2.2 Limit . 11
4.4.2.3 Conformance . 11
4.4.3 Audio frequency harmonic distortion of the emission . 11
4.4.3.1 Definition . 11
4.4.3.2 Limit . 11
4.4.3.3 Conformance . 11
4.4.4 Residual modulation of the transmitter . 11
4.4.4.1 Definition . 11
ETSI
4 ETSI EN 302 885-3 V1.1.1 (2011-09)
4.4.4.2 Limit . 11
4.4.4.3 Conformance . 11
4.4.5 Harmonic distortion and rated audio-frequency output power . 11
4.4.5.1 Definition . 11
4.4.5.2 Limit . 11
4.4.5.3 Conformance . 11
4.4.6 Receiver audio frequency response . 12
4.4.6.1 Definition . 12
4.4.6.2 Limit . 12
4.4.6.3 Conformance . 12
4.4.7 Receiver noise and hum level . 12
4.4.7.1 Definition . 12
4.4.7.2 Limit . 12
4.4.7.3 Conformance . 12
4.4.8 Squelch operation . 12
4.4.8.1 Definition . 12
4.4.8.2 Limit . 12
4.4.8.3 Conformance . 12
4.4.9 Squelch hysteresis . 12
4.4.9.1 Definition . 12
4.4.9.2 Limit . 12
4.4.9.3 Conformance . 12
4.4.10 Receiver scanning efficiency . 13
4.4.10.1 Definition . 13
4.4.10.2 Limit . 13
4.4.10.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Test conditions, power supply and ambient temperatures . 13
5.2 Interpretation of the measurement results . 13
5.3 Essential radio test suites . 14
5.3.1 Environmental tests. 14
5.3.1.1 Introduction . 14
5.3.1.2 Procedure . 14
5.3.1.3 Performance check . 14
5.3.1.4 Drop test . 14
5.3.1.4.1 Definition. 14
5.3.1.4.2 Limit . 14
5.3.1.4.3 Conformance . 14
5.3.1.5 Temperature tests . 15
5.3.1.5.1 Dry heat . 15
5.3.1.5.1.1 Definition . 15
5.3.1.5.1.2 Limit . 15
5.3.1.5.1.3 Confor ma nce . 15
5.3.1.5.2 Damp heat . 15
5.3.1.5.2.1 Definition . 15
5.3.1.5.2.2 Limit . 15
5.3.1.5.2.3 Confor ma nce . 15
5.3.1.5.3 Low temperature . 15
5.3.1.5.3.1 Definition . 15
5.3.1.5.3.2 Limit . 15
5.3.1.5.3.3 Confor ma nce . 15
5.3.2 Conformance tests . 15
5.3.2.1 Sensitivity of the modulator, including microphone . 15
5.3.2.2 Audio frequency response . 15
5.3.2.3 Audio frequency harmonic distortion of the emission . 16
5.3.2.4 Residual modulation of the transmitter . 16
5.4 Other test suites . 16
5.4.1 General . 16
5.4.2 Harmonic distortion and rated audio-frequency output power . 16
5.4.3 Receiver audio frequency response . 16
5.4.4 Receiver noise and hum level . 16
ETSI
5 ETSI EN 302 885-3 V1.1.1 (2011-09)
5.4.5 Squelch operation . 16
5.4.6 Squelch hysteresis . 16
5.4.7 Receiver scanning efficiency . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B (informative): The EN title in the official languages . 19
History . 20

ETSI
6 ETSI EN 302 885-3 V1.1.1 (2011-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A.
The present document is part 3 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".

National transposition dates
Date of ad
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 885-3 Version 1.1.1SIST EN 302 885-3 V1.1.1:2011en01-november-2011SIST EN 302 885-3 V1.1.1:2011SLOVENSKI
STANDARD
Harmonized European Standard SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 2
Reference DEN/ERM-TG26-086-3 Keywords DSC, maritime, radio, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions and abbreviations . 8 3.1 Definitions . 8 3.2 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 General, operational and technical requirements . 9 4.2.1 General and operational requirements . 9 4.2.1.1 Requirements . 9 4.2.1.2 Conformance . 9 4.2.2 Technical requirements . 9 4.2.2.1 Requirements . 9 4.2.2.2 Conformance . 9 4.3 Environmental requirements . 9 4.3.1 Drop test . 9 4.3.1.1 Definition . 9 4.3.1.2 Requirement . 9 4.3.1.3 Conformance . 9 4.3.2 Temperature tests . 9 4.3.2.1 Definition . 9 4.3.2.2 Dry heat . 9 4.3.2.2.1 Definition. 9 4.3.2.2.2 Requirement . 10 4.3.2.2.3 Conformance . 10 4.3.2.3 Damp heat . 10 4.3.2.3.1 Definition. 10 4.3.2.3.2 Requirement . 10 4.3.2.3.3 Conformance . 10 4.3.2.4 Low temperature . 10 4.3.2.4.1 Definition. 10 4.3.2.4.2 Requirement . 10 4.3.2.4.3 Conformance . 10 4.4 Conformance requirements . 10 4.4.1 Sensitivity of the modulator, including microphone . 10 4.4.1.1 Definition . 10 4.4.1.2 Limit . 10 4.4.1.3 Conformance . 10 4.4.2 Audio frequency response . 11 4.4.2.1 Definition . 11 4.4.2.2 Limit . 11 4.4.2.3 Conformance . 11 4.4.3 Audio frequency harmonic distortion of the emission . 11 4.4.3.1 Definition . 11 4.4.3.2 Limit . 11 4.4.3.3 Conformance . 11 4.4.4 Residual modulation of the transmitter . 11 4.4.4.1 Definition . 11 SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 4 4.4.4.2 Limit . 11 4.4.4.3 Conformance . 11 4.4.5 Harmonic distortion and rated audio-frequency output power . 11 4.4.5.1 Definition . 11 4.4.5.2 Limit . 11 4.4.5.3 Conformance . 11 4.4.6 Receiver audio frequency response . 12 4.4.6.1 Definition . 12 4.4.6.2 Limit . 12 4.4.6.3 Conformance . 12 4.4.7 Receiver noise and hum level . 12 4.4.7.1 Definition . 12 4.4.7.2 Limit . 12 4.4.7.3 Conformance . 12 4.4.8 Squelch operation . 12 4.4.8.1 Definition . 12 4.4.8.2 Limit . 12 4.4.8.3 Conformance . 12 4.4.9 Squelch hysteresis . 12 4.4.9.1 Definition . 12 4.4.9.2 Limit . 12 4.4.9.3 Conformance . 12 4.4.10 Receiver scanning efficiency . 13 4.4.10.1 Definition . 13 4.4.10.2 Limit . 13 4.4.10.3 Conformance . 13 5 Testing for compliance with technical requirements . 13 5.1 Test conditions, power supply and ambient temperatures . 13 5.2 Interpretation of the measurement results . 13 5.3 Essential radio test suites . 14 5.3.1 Environmental tests. 14 5.3.1.1 Introduction . 14 5.3.1.2 Procedure . 14 5.3.1.3 Performance check . 14 5.3.1.4 Drop test . 14 5.3.1.4.1 Definition. 14 5.3.1.4.2 Limit . 14 5.3.1.4.3 Conformance . 14 5.3.1.5 Temperature tests . 15 5.3.1.5.1 Dry heat . 15 5.3.1.5.1.1 Definition . 15 5.3.1.5.1.2 Limit . 15 5.3.1.5.1.3 Conformance . 15 5.3.1.5.2 Damp heat . 15 5.3.1.5.2.1 Definition . 15 5.3.1.5.2.2 Limit . 15 5.3.1.5.2.3 Conformance . 15 5.3.1.5.3 Low temperature . 15 5.3.1.5.3.1 Definition . 15 5.3.1.5.3.2 Limit . 15 5.3.1.5.3.3 Conformance . 15 5.3.2 Conformance tests . 15 5.3.2.1 Sensitivity of the modulator, including microphone . 15 5.3.2.2 Audio frequency response . 15 5.3.2.3 Audio frequency harmonic distortion of the emission . 16 5.3.2.4 Residual modulation of the transmitter . 16 5.4 Other test suites . 16 5.4.1 General . 16 5.4.2 Harmonic distortion and rated audio-frequency output power . 16 5.4.3 Receiver audio frequency response . 16 5.4.4 Receiver noise and hum level . 16 SIST EN 302 885-3 V1.1.1:2011

ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 5 5.4.5 Squelch operation . 16 5.4.6 Squelch hysteresis . 16 5.4.7 Receiver scanning efficiency . 16 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 17 Annex B (informative): The EN title in the official languages . 19 History . 20
ETSI ETSI EN 302 885-3 V1.1.1 (2011-09) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to
...