SIST ISO 26162:2013
(Main)Systems to manage terminology, knowledge and content -- Design, implementation and maintenance of terminology management systems
Systems to manage terminology, knowledge and content -- Design, implementation and maintenance of terminology management systems
This International Standard specifies criteria for designing, implementing and maintaining terminology management systems (TMSs). This International Standard provides information about the rationale for using a TMS, types of users and users' needs, steps in designing and implementing a TMS, as well as the tasks of organizing and managing a terminological data collection (TDC). It also provides guidelines for selecting and using data categories for managing terminology in various environments. This International Standard is intended for terminologists, software developers and others who are involved in the process of developing or acquiring a TMS.
Systèmes de gestion de la terminologie, de la connaissance et du contenu -- Conception, mise en oeuvre et maintenance des systèmes de gestion de la terminologie
Sistemi za upravljanje terminologije, znanja in vsebine - Zasnova, implementacija in vzdrževanje sistemov za upravljanje s terminologijo
Ta mednarodni standard določa merila za zasnovo, implementacijo in vzdrževanje sistemov za upravljanje s terminologijo (TMS). Ta mednarodni standard zagotavlja informacije o utemeljitvi uporabe vrst uporabnikov TMS in njihovih potreb, korakov pri zasnovi in implementaciji TMS ter nalog pri organizaciji in vzdrževanju zbirk terminoloških podatkov (TDC). Prav tako zagotavlja smernice za izbiro in uporabo podatkovnih kategorij za upravljanje s terminologijo v različnih okoljih. Ta mednarodni standard je namenjen terminologom, razvijalcem programske opreme in drugim, ki so vključeni v postopek razvoja ali pridobivanja TMS.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO 26162:2013
01-julij-2013
Sistemi za upravljanje terminologije, znanja in vsebine - Zasnova, implementacija
in vzdrževanje sistemov za upravljanje s terminologijo
Systems to manage terminology, knowledge and content -- Design, implementation and
maintenance of terminology management systems
Systèmes de gestion de la terminologie, de la connaissance et du contenu --
Conception, mise en oeuvre et maintenance des systèmes de gestion de la terminologie
Ta slovenski standard je istoveten z: ISO 26162:2012
ICS:
01.020 7HUPLQRORJLMD QDþHODLQ Terminology (principles and
NRRUGLQDFLMD coordination)
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
SIST ISO 26162:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 26162:2013
---------------------- Page: 2 ----------------------
SIST ISO 26162:2013
INTERNATIONAL ISO
STANDARD 26162
First edition
2012-08-15
Systems to manage terminology,
knowledge and content — Design,
implementation and maintenance of
terminology management systems
Systèmes de gestion de la terminologie, de la connaissance et du
contenu — Conception, mise en œuvre et maintenance des systèmes
de gestion de la terminologie
Reference number
ISO 26162:2012(E)
©
ISO 2012
---------------------- Page: 3 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
Contents Page
Foreword . vi
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Resources . 1
3.2 Data categories . 3
3.3 Data modelling . 5
3.4 Applications . 7
4 Terminology management system (TMS) . 7
4.1 General description . 7
4.2 Purchased or self-programmed TMS . 8
4.3 Predefined or freely definable TMS . 8
4.4 Desktop, client-server or Web-based TMS . 8
4.5 Stand-alone, integrated or combined TMS . 8
4.6 Monolingual, bilingual or multilingual TMS . 9
4.7 Database or structured text TMS . 9
4.8 Single-database or multiple-database TMS . 9
5 Project phases . 9
5.1 Overview . 9
5.2 Pre-feasibility study . 10
5.3 Feasibility study . 10
5.4 Use-case analysis . 10
5.5 System requirements . 10
5.6 Cost-effectiveness . 11
5.7 System design . 11
5.8 System development . 11
5.9 System deployment . 11
5.10 System test . 12
5.11 TMS population, use, and maintenance . 12
6 User-centred design . 12
6.1 Basic procedures . 12
6.2 Steps in a user-centred approach . 13
6.3 Identifying the users and their needs . 13
6.4 Identifying the output products . 16
6.5 Performing a task analysis and preparing use cases . 16
6.6 Identifying and prioritizing requirements . 18
6.7 Conducting a competitive evaluation . 19
6.8 Designing and evaluating a prototype . 19
6.9 Adjusting the design to user feedback . 19
6.10 Performing a beta assessment . 19
7 Terminological data categories . 19
7.1 Introduction to data categories . 19
7.2 Principles for selecting and using data categories . 20
7.3 Types of data categories . 23
7.4 Data entry structures . 26
7.5 Selecting data categories . 26
7.6 Translation-specific data categories . 27
© ISO 2012 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
7.7 Prescriptive data categories .27
7.8 Workflow-related data categories .27
7.9 Standardized data category names and data category concepts .27
8 Data modelling .28
8.1 The terminological metamodel .28
8.2 Data modelling for concept orientation .29
8.3 Application-oriented approaches .32
8.4 Data modelling examples .33
8.5 Accounting for legacy data .39
9 Implementing the TMS .40
10 Deploying the TMS.41
10.1 Deployment activities .41
10.2 Preparing documentation, help, and educational materials .41
10.3 Providing support and maintenance .42
10.4 Meeting stakeholder dependencies .42
10.5 Announcing and promoting the TMS .42
10.6 Delivering the TMS.42
10.7 Providing training .42
10.8 Measuring user satisfaction .42
11 User interfaces .43
11.1 Designing the user interface .43
11.2 Displaying terminological data categories .43
11.3 Displaying and arranging terminological entries .44
12 Inputting and editing data .47
12.1 Manually inputting data .47
12.2 Importing data .51
12.3 Editing data .52
12.4 Validating data .52
12.5 Automatically generating or modifying data .53
12.6 Adding cross-references .53
12.7 Adding multimedia files .53
13 Search functions .54
13.1 Database search features .54
13.2 Searching for a term .55
13.3 Searching by concept number or characteristics .55
13.4 Complex filtering and searching .56
13.5 Searching in text fields .56
13.6 Brow sing .56
14 Data output .56
14.1 Types of data output .56
14.2 Displaying search results .56
14.3 Sorting .57
14.4 Printouts .58
14.5 Exporting the data to a file .61
14.6 Exporting data for other applications .61
15 Organizing and administering the TMS .61
15.1 Creating a management plan .61
15.2 Importance of data flow management .62
15.3 Changing the data model .62
15.4 Providing for data security .62
15.5 Controlling access .63
15.6 Supporting an interchange format .63
15.7 Staffing the TMS .64
15.8 Controlling costs and managing resources .64
Annex A (informative) Case studies: Data categories and data modelling .66
iv © ISO 2012 – All rights reserved
---------------------- Page: 6 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
Bibliography . 69
© ISO 2012 – All rights reserved v
---------------------- Page: 7 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 26162 was prepared by Technical Committee ISO/TC 37, Terminology and other language and content
resources, Subcommittee SC 3, Systems to manage terminology, knowledge and content.
vi © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
Introduction
Terminological data are collected, managed and stored in a wide variety of terminology management
systems (TMSs). TMSs employ a variety of database management systems, ranging from personal computer
applications for individual users to client server applications or Web-based applications operated by major
companies and governmental agencies. Terminological data collections (TDCs) are based on various kinds of
data models and consist of different sets of data categories (Data Category Selections, DCSs). To facilitate
co-operation and to prevent duplication of work, it is important to develop standards and guidelines for
creating and using TDCs as well as for sharing and exchanging data.
ISO/TC 37 has published the following standards in order to facilitate the exchange of terminological data and
to create an integrated approach to be used in analysing an existing TDC and in designing new ones: ISO 704,
ISO 12620, ISO 16642.
Having some acquaintance with these documents before reading this International Standard would be
beneficial.
This International Standard gives guidance on choosing the relevant data categories, as well as designing and
implementing a data model and a user interface for a TMS, taking into account the intended user group. The
guidelines described in this International Standard are indispensable for the successful development of a TMS
and for avoiding costly errors. This International Standard may be used for choosing the appropriate TMS for
a certain purpose.
© ISO 2012 – All rights reserved vii
---------------------- Page: 9 ----------------------
SIST ISO 26162:2013
---------------------- Page: 10 ----------------------
SIST ISO 26162:2013
INTERNATIONAL STANDARD ISO 26162:2012(E)
Systems to manage terminology, knowledge and content —
Design, implementation and maintenance of terminology
management systems
1 Scope
This International Standard specifies criteria for designing, implementing and maintaining terminology
management systems (TMSs).
This International Standard provides information about the rationale for using a TMS, types of users and
users' needs, steps in designing and implementing a TMS, as well as the tasks of organizing and managing a
terminological data collection (TDC). It also provides guidelines for selecting and using data categories for
managing terminology in various environments.
This International Standard is intended for terminologists, software developers and others who are involved in
the process of developing or acquiring a TMS.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 704, Terminology work — Principles and methods
ISO 12620, Terminology and other language and content resources — Specification of data categories and
management of a Data Category Registry for language resources
ISO 16642, Computer applications in terminology — Terminology markup framework
ISO 30042, Systems to manage terminology, knowledge and content — TermBase eXchange (TBX)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 Resources
3.1.1
terminological resource
terminological data collection
TDC
text or data resource consisting of terminological entries (3.1.4)
NOTE Adapted from ISO 24613:2008.
© ISO 2012 – All rights reserved 1
---------------------- Page: 11 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
3.1.2
terminology management system
TMS
software tool specifically designed for collecting, maintaining, and accessing terminological data
3.1.3
terminological database
TDB
termbase
database comprising a terminological resource (3.1.1)
3.1.4
terminological entry
TE
part of a terminological resource (3.1.1) that contains the terminological data related to one concept
NOTE Adapted from ISO 1087-2, 2.22. The abbreviated term has been added.
3.1.5
concept orientation
principle applied to terminology management whereby a terminological entry (3.1.4) describes one and only
one concept or two or more quasi-equivalent concepts (3.1.7)
NOTE A concept-oriented entry can contain multiple terms, which are therefore considered semantically equivalent.
3.1.6
equivalent concept
concept in one language that comprises the same characteristics as that covered by a given concept in
another language
3.1.7
quasi-equivalent concept
nearly equivalent concept
concept in one language that shares most but not all characteristics with a concept in another language, but
that is nevertheless used as an equivalent for that concept in some contexts
3.1.8
entailed term
term used in a text field such as the /definition/ or /context/ that designates a concept that is defined in another
terminological entry (3.1.4) in the same terminological resource (3.1.1)
3.1.9
doublette
terminological entry (3.1.4) that describes the same concept as another entry
NOTE Doublettes are normally detected by TMS by identifying two terms having the same form; however, doublettes
are determined based on identical concepts, not on identical terms. Doublettes should not be confused with homographs.
3.1.10
concept system
set of concepts structured according to the relationships among them
[ISO 1087-1:2000, 3.2.11]
3.1.11
concept diagram
graphic representation of a concept system (3.1.10)
[ISO 1087-1:2000, 3.2.12]
2 © ISO 2012 – All rights reserved
---------------------- Page: 12 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
3.1.12
legacy data
terminological data that are available in an existing file or database, and that are considered for importation
into a TMS (3.1.2)
NOTE Legacy data may be in the form of previously used databases, word-processing files, comma-delimited text
files, SGML, HTML, or XML files, and the like. Conversion of such data to a format that will be compatible with a new TMS
can pose serious challenges.
3.1.13
term
word, or several words, that denote a concept
EXAMPLES “Olympics” and “special Olympics” are two terms in the field of sports.
NOTE 1 When the word or words can denote more than one concept, each word/concept pair is a separate term. For
example, “port” (shelter for boats) and “port” (computer connection point) are two different terms.
NOTE 2 In terminology theory, terms denote concepts in specific subject fields, and words from the general lexicon are
not considered to be terms. In a TDC, however, words from the general lexicon are sometimes recorded in terminological
entries, where they are still referred to as “terms”.
3.2 Data categories
3.2.1
data category
result of the specification of a data field
[ISO 1087-2:2000, 6.14]
3.2.2
data element
unit of data that, in a certain context, is considered indivisible
[ISO 1087-2:2000, 6.11]
3.2.3
data granularity
degree of precision of data
NOTE For example, the set of individual data categories (3.2.1) /part of speech/, /grammatical gender/, and
/grammatical number/ provides for greater data granularity than does the single data category /grammar/.
3.2.4
data elementarity
principle whereby a single data field shall contain only one item of information
NOTE For example, including both a full form and an abbreviation in the same field would be a violation of the
principle of data elementarity.
3.2.5
term autonomy
principle whereby all terms in a terminological entry (3.1.4) can be described by using the same set of data
categories (3.2.1)
3.2.6
Data Category Registry
DCR
set of standardized data categories (3.2.1) to be used as a reference for the definition of linguistic annotation
schemes or any other formats in the domain of language resources
[ISO 12620:2009, 3.2.1]
© ISO 2012 – All rights reserved 3
---------------------- Page: 13 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
NOTE The ISO/TC 37 DCR contains data category specifications (3.2.7), which include historical, descriptive, and
administrative information and other metadata.
3.2.7
data category specification
set of attributes used to fully describe a given data category (3.2.1)
[ISO 12620:2009, 3.2.2]
NOTE The abbreviation DCS refers to Data Category Selection (3.2.8).
3.2.8
Data Category Selection
DCS
set of data categories (3.2.1) selected from the Data Category Registry (3.2.6)
[ISO 12620:2009, 3.2.3]
3.2.9
complex data category
data category (3.2.1) that has a conceptual domain (3.2.11)
[ISO 12620:2009, 3.1.7]
3.2.10
open data category
complex data category (3.2.9) whose conceptual domain (3.2.11) is not restricted to an enumerated set of
values
[ISO 12620:2009, 3.1.8]
3.2.11
conceptual domain
set of valid value meanings (3.2.14)
NOTE 1 Based on ISO/IEC 11179-1:2004, 3.3.6.
NOTE 2 The value meanings in a conceptual domain may be enumerated, further specified by additional constraints or
expressed via a description. For instance, the data category (3.2.1) /term/ is described by its definition and thus
constrained from properly containing, for example, contextual information or grammatical information, but it would be
impossible to enumerate all values associated with this data category.
3.2.12
closed data category
complex data category (3.2.9) whose conceptual domain (3.2.11) is restricted to a set of identified simple
data categories (3.2.13)
[ISO 12620:2009, 3.1.13]
3.2.13
simple data category
data category (3.2.1) with no conceptual domain (3.2.11)
[ISO 12620:2009, 3.1.12]
3.2.14
value meaning
meaning or semantic content of a value
[ISO/IEC 11179-1:2004, 3.3.39]
4 © ISO 2012 – All rights reserved
---------------------- Page: 14 ----------------------
SIST ISO 26162:2013
ISO 26162:2012(E)
NOTE ISO/TC 37 treats enumerated values as simple data categories, that is, as data categories in their own right.
The meaning of a value is always viewed in the context of the overall value domain and the closed data category with
which it is associated, and
...
INTERNATIONAL ISO
STANDARD 26162
First edition
2012-08-15
Systems to manage terminology,
knowledge and content — Design,
implementation and maintenance of
terminology management systems
Systèmes de gestion de la terminologie, de la connaissance et du
contenu — Conception, mise en œuvre et maintenance des systèmes
de gestion de la terminologie
Reference number
ISO 26162:2012(E)
©
ISO 2012
---------------------- Page: 1 ----------------------
ISO 26162:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 26162:2012(E)
Contents Page
Foreword . vi
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Resources . 1
3.2 Data categories . 3
3.3 Data modelling . 5
3.4 Applications . 7
4 Terminology management system (TMS) . 7
4.1 General description . 7
4.2 Purchased or self-programmed TMS . 8
4.3 Predefined or freely definable TMS . 8
4.4 Desktop, client-server or Web-based TMS . 8
4.5 Stand-alone, integrated or combined TMS . 8
4.6 Monolingual, bilingual or multilingual TMS . 9
4.7 Database or structured text TMS . 9
4.8 Single-database or multiple-database TMS . 9
5 Project phases . 9
5.1 Overview . 9
5.2 Pre-feasibility study . 10
5.3 Feasibility study . 10
5.4 Use-case analysis . 10
5.5 System requirements . 10
5.6 Cost-effectiveness . 11
5.7 System design . 11
5.8 System development . 11
5.9 System deployment . 11
5.10 System test . 12
5.11 TMS population, use, and maintenance . 12
6 User-centred design . 12
6.1 Basic procedures . 12
6.2 Steps in a user-centred approach . 13
6.3 Identifying the users and their needs . 13
6.4 Identifying the output products . 16
6.5 Performing a task analysis and preparing use cases . 16
6.6 Identifying and prioritizing requirements . 18
6.7 Conducting a competitive evaluation . 19
6.8 Designing and evaluating a prototype . 19
6.9 Adjusting the design to user feedback . 19
6.10 Performing a beta assessment . 19
7 Terminological data categories . 19
7.1 Introduction to data categories . 19
7.2 Principles for selecting and using data categories . 20
7.3 Types of data categories . 23
7.4 Data entry structures . 26
7.5 Selecting data categories . 26
7.6 Translation-specific data categories . 27
© ISO 2012 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 26162:2012(E)
7.7 Prescriptive data categories .27
7.8 Workflow-related data categories .27
7.9 Standardized data category names and data category concepts .27
8 Data modelling .28
8.1 The terminological metamodel .28
8.2 Data modelling for concept orientation .29
8.3 Application-oriented approaches .32
8.4 Data modelling examples .33
8.5 Accounting for legacy data .39
9 Implementing the TMS .40
10 Deploying the TMS.41
10.1 Deployment activities .41
10.2 Preparing documentation, help, and educational materials .41
10.3 Providing support and maintenance .42
10.4 Meeting stakeholder dependencies .42
10.5 Announcing and promoting the TMS .42
10.6 Delivering the TMS.42
10.7 Providing training .42
10.8 Measuring user satisfaction .42
11 User interfaces .43
11.1 Designing the user interface .43
11.2 Displaying terminological data categories .43
11.3 Displaying and arranging terminological entries .44
12 Inputting and editing data .47
12.1 Manually inputting data .47
12.2 Importing data .51
12.3 Editing data .52
12.4 Validating data .52
12.5 Automatically generating or modifying data .53
12.6 Adding cross-references .53
12.7 Adding multimedia files .53
13 Search functions .54
13.1 Database search features .54
13.2 Searching for a term .55
13.3 Searching by concept number or characteristics .55
13.4 Complex filtering and searching .56
13.5 Searching in text fields .56
13.6 Brow sing .56
14 Data output .56
14.1 Types of data output .56
14.2 Displaying search results .56
14.3 Sorting .57
14.4 Printouts .58
14.5 Exporting the data to a file .61
14.6 Exporting data for other applications .61
15 Organizing and administering the TMS .61
15.1 Creating a management plan .61
15.2 Importance of data flow management .62
15.3 Changing the data model .62
15.4 Providing for data security .62
15.5 Controlling access .63
15.6 Supporting an interchange format .63
15.7 Staffing the TMS .64
15.8 Controlling costs and managing resources .64
Annex A (informative) Case studies: Data categories and data modelling .66
iv © ISO 2012 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 26162:2012(E)
Bibliography . 69
© ISO 2012 – All rights reserved v
---------------------- Page: 5 ----------------------
ISO 26162:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 26162 was prepared by Technical Committee ISO/TC 37, Terminology and other language and content
resources, Subcommittee SC 3, Systems to manage terminology, knowledge and content.
vi © ISO 2012 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 26162:2012(E)
Introduction
Terminological data are collected, managed and stored in a wide variety of terminology management
systems (TMSs). TMSs employ a variety of database management systems, ranging from personal computer
applications for individual users to client server applications or Web-based applications operated by major
companies and governmental agencies. Terminological data collections (TDCs) are based on various kinds of
data models and consist of different sets of data categories (Data Category Selections, DCSs). To facilitate
co-operation and to prevent duplication of work, it is important to develop standards and guidelines for
creating and using TDCs as well as for sharing and exchanging data.
ISO/TC 37 has published the following standards in order to facilitate the exchange of terminological data and
to create an integrated approach to be used in analysing an existing TDC and in designing new ones: ISO 704,
ISO 12620, ISO 16642.
Having some acquaintance with these documents before reading this International Standard would be
beneficial.
This International Standard gives guidance on choosing the relevant data categories, as well as designing and
implementing a data model and a user interface for a TMS, taking into account the intended user group. The
guidelines described in this International Standard are indispensable for the successful development of a TMS
and for avoiding costly errors. This International Standard may be used for choosing the appropriate TMS for
a certain purpose.
© ISO 2012 – All rights reserved vii
---------------------- Page: 7 ----------------------
INTERNATIONAL STANDARD ISO 26162:2012(E)
Systems to manage terminology, knowledge and content —
Design, implementation and maintenance of terminology
management systems
1 Scope
This International Standard specifies criteria for designing, implementing and maintaining terminology
management systems (TMSs).
This International Standard provides information about the rationale for using a TMS, types of users and
users' needs, steps in designing and implementing a TMS, as well as the tasks of organizing and managing a
terminological data collection (TDC). It also provides guidelines for selecting and using data categories for
managing terminology in various environments.
This International Standard is intended for terminologists, software developers and others who are involved in
the process of developing or acquiring a TMS.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 704, Terminology work — Principles and methods
ISO 12620, Terminology and other language and content resources — Specification of data categories and
management of a Data Category Registry for language resources
ISO 16642, Computer applications in terminology — Terminology markup framework
ISO 30042, Systems to manage terminology, knowledge and content — TermBase eXchange (TBX)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 Resources
3.1.1
terminological resource
terminological data collection
TDC
text or data resource consisting of terminological entries (3.1.4)
NOTE Adapted from ISO 24613:2008.
© ISO 2012 – All rights reserved 1
---------------------- Page: 8 ----------------------
ISO 26162:2012(E)
3.1.2
terminology management system
TMS
software tool specifically designed for collecting, maintaining, and accessing terminological data
3.1.3
terminological database
TDB
termbase
database comprising a terminological resource (3.1.1)
3.1.4
terminological entry
TE
part of a terminological resource (3.1.1) that contains the terminological data related to one concept
NOTE Adapted from ISO 1087-2, 2.22. The abbreviated term has been added.
3.1.5
concept orientation
principle applied to terminology management whereby a terminological entry (3.1.4) describes one and only
one concept or two or more quasi-equivalent concepts (3.1.7)
NOTE A concept-oriented entry can contain multiple terms, which are therefore considered semantically equivalent.
3.1.6
equivalent concept
concept in one language that comprises the same characteristics as that covered by a given concept in
another language
3.1.7
quasi-equivalent concept
nearly equivalent concept
concept in one language that shares most but not all characteristics with a concept in another language, but
that is nevertheless used as an equivalent for that concept in some contexts
3.1.8
entailed term
term used in a text field such as the /definition/ or /context/ that designates a concept that is defined in another
terminological entry (3.1.4) in the same terminological resource (3.1.1)
3.1.9
doublette
terminological entry (3.1.4) that describes the same concept as another entry
NOTE Doublettes are normally detected by TMS by identifying two terms having the same form; however, doublettes
are determined based on identical concepts, not on identical terms. Doublettes should not be confused with homographs.
3.1.10
concept system
set of concepts structured according to the relationships among them
[ISO 1087-1:2000, 3.2.11]
3.1.11
concept diagram
graphic representation of a concept system (3.1.10)
[ISO 1087-1:2000, 3.2.12]
2 © ISO 2012 – All rights reserved
---------------------- Page: 9 ----------------------
ISO 26162:2012(E)
3.1.12
legacy data
terminological data that are available in an existing file or database, and that are considered for importation
into a TMS (3.1.2)
NOTE Legacy data may be in the form of previously used databases, word-processing files, comma-delimited text
files, SGML, HTML, or XML files, and the like. Conversion of such data to a format that will be compatible with a new TMS
can pose serious challenges.
3.1.13
term
word, or several words, that denote a concept
EXAMPLES “Olympics” and “special Olympics” are two terms in the field of sports.
NOTE 1 When the word or words can denote more than one concept, each word/concept pair is a separate term. For
example, “port” (shelter for boats) and “port” (computer connection point) are two different terms.
NOTE 2 In terminology theory, terms denote concepts in specific subject fields, and words from the general lexicon are
not considered to be terms. In a TDC, however, words from the general lexicon are sometimes recorded in terminological
entries, where they are still referred to as “terms”.
3.2 Data categories
3.2.1
data category
result of the specification of a data field
[ISO 1087-2:2000, 6.14]
3.2.2
data element
unit of data that, in a certain context, is considered indivisible
[ISO 1087-2:2000, 6.11]
3.2.3
data granularity
degree of precision of data
NOTE For example, the set of individual data categories (3.2.1) /part of speech/, /grammatical gender/, and
/grammatical number/ provides for greater data granularity than does the single data category /grammar/.
3.2.4
data elementarity
principle whereby a single data field shall contain only one item of information
NOTE For example, including both a full form and an abbreviation in the same field would be a violation of the
principle of data elementarity.
3.2.5
term autonomy
principle whereby all terms in a terminological entry (3.1.4) can be described by using the same set of data
categories (3.2.1)
3.2.6
Data Category Registry
DCR
set of standardized data categories (3.2.1) to be used as a reference for the definition of linguistic annotation
schemes or any other formats in the domain of language resources
[ISO 12620:2009, 3.2.1]
© ISO 2012 – All rights reserved 3
---------------------- Page: 10 ----------------------
ISO 26162:2012(E)
NOTE The ISO/TC 37 DCR contains data category specifications (3.2.7), which include historical, descriptive, and
administrative information and other metadata.
3.2.7
data category specification
set of attributes used to fully describe a given data category (3.2.1)
[ISO 12620:2009, 3.2.2]
NOTE The abbreviation DCS refers to Data Category Selection (3.2.8).
3.2.8
Data Category Selection
DCS
set of data categories (3.2.1) selected from the Data Category Registry (3.2.6)
[ISO 12620:2009, 3.2.3]
3.2.9
complex data category
data category (3.2.1) that has a conceptual domain (3.2.11)
[ISO 12620:2009, 3.1.7]
3.2.10
open data category
complex data category (3.2.9) whose conceptual domain (3.2.11) is not restricted to an enumerated set of
values
[ISO 12620:2009, 3.1.8]
3.2.11
conceptual domain
set of valid value meanings (3.2.14)
NOTE 1 Based on ISO/IEC 11179-1:2004, 3.3.6.
NOTE 2 The value meanings in a conceptual domain may be enumerated, further specified by additional constraints or
expressed via a description. For instance, the data category (3.2.1) /term/ is described by its definition and thus
constrained from properly containing, for example, contextual information or grammatical information, but it would be
impossible to enumerate all values associated with this data category.
3.2.12
closed data category
complex data category (3.2.9) whose conceptual domain (3.2.11) is restricted to a set of identified simple
data categories (3.2.13)
[ISO 12620:2009, 3.1.13]
3.2.13
simple data category
data category (3.2.1) with no conceptual domain (3.2.11)
[ISO 12620:2009, 3.1.12]
3.2.14
value meaning
meaning or semantic content of a value
[ISO/IEC 11179-1:2004, 3.3.39]
4 © ISO 2012 – All rights reserved
---------------------- Page: 11 ----------------------
ISO 26162:2012(E)
NOTE ISO/TC 37 treats enumerated values as simple data categories, that is, as data categories in their own right.
The meaning of a value is always viewed in the context of the overall value domain and the closed data category with
which it is associated, and is not just a property of the domain value itself.
3.2.15
value domain
set of permissible values (3.2.16)
[ISO/IEC 11179-1:2004, 3.3.38]
3.2.16
permissible value
expression of a value meaning (3.2.14) allowed in a specific value domain (3.2.15)
[ISO/IEC 11179-1:2004, 3.3.28]
3.2.17
thematic domain
class of applications identified by the similarity of the data structures they need to manipulate
[ISO 12620:2009, 3.4.3]
EXAMPLES Terminology, lexicography, morphosyntactic annotation.
3.2.18
thematic domain profile
profile
representation within a data category specification (3.2.7) of the thematic domain (3.2.17) with which a
data category (3.2.1) is associated
[ISO 12620:2009, 3.4.4]
NOTE A data category may have several thematic domain profiles, indicating that it is used by several thematic
domains.
3.3 Data modelling
3.3.1
data model
graphical and/or lexical representation of data, specifying their properties, structure and inter-relationships
[ISO/IEC 11179-1:2004, 3.2.7]
3.3.2
data modelling
process of structuring and organizing data, typically for implementation in a database management system
3.3.3
data modelling variance
variation in the assignment of data categories (3.2.1) to data models as a result of differences in philosophy
with respect to the ordering of information in the terminological entry (3.1.4)
3.3.4
metamodel
data mod
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.