SIST EN ISO 11120:2000/A1:2013
(Amendment)Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing - Amendment 1: Requirements for design of tubes for embrittling gases (EN ISO 11120:1999/Amd 1:2013)
Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing - Amendment 1: Requirements for design of tubes for embrittling gases (EN ISO 11120:1999/Amd 1:2013)
This International Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of refillable quenched and tempered seamless steel tubes of water capacities from 150 litres up to and including 3000 litres for compressed and liquefied gases exposed to extreme world-wide ambient temperatures (normally between - 50 °C and + 65 °C). This International Standard is applicable to cylinders with a maximum tensile strength Rm of less than 1100 MPa.
Ortsbewegliche Gasflaschen - Nahtlose wiederbefüllbare Großflaschen aus Stahl für den Transport verdichteter Gase mit einem Fassungsvermögen (Wasser) zwischen 150 l und 3 000 l - Gestaltung, Konstruktion und Prüfung - Änderung 1: Anforderungen für die Gestaltung von Großflaschen für versprödende Gase (EN ISO 11120:1999/Amd 1:2013)
Bouteilles à gaz - Tubes en acier sans soudure rechargeables d'une contenance en eau de 150 l à 3000 l pour le transport des gaz comprimés - Conception, construction et essais - Amendement 1 - Exigences de conception des tubes destinés aux gaz fragilisants (EN ISO 11120:1999/Amd 1:2013)
Plinske jeklenke - Ponovno polnljive velike jeklenke iz celega iz jekla za transport stisnjenega plina vodne prostornine od 150 do 3000 l - Konstruiranje, izdelava in preskušanje - Dopolnilo 1: Zahteve za konstruiranje velikih jeklenk za pline, ki povzročajo krhkost (EN ISO 11120:1999/Amd 1:2013)
Ta mednarodni standard določa minimalne zahteve za material, konstruiranje, izdelavo in izvedbo, postopke izdelave in preskuse ob času izdelave ponovno polnljivih velikih jeklenk iz kaljenega in popuščenega jekla vodne prostornine od 150 litrov do vključno 3000 litrov za stisnjene in utekočinjene pline, izpostavljene ekstremnim temperaturam okolja po vsem svetu (običajno med –50 °C in +65 °C). Ta mednarodni standard se uporablja za jeklenke z največjo natezno trdnostjo Rm, manjšo od 1100 MPa.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11120:2000/A1:2013
01-december-2013
3OLQVNHMHNOHQNH3RQRYQRSROQOMLYHYHOLNHMHNOHQNHL]FHOHJDL]MHNOD]DWUDQVSRUW
VWLVQMHQHJDSOLQDYRGQHSURVWRUQLQHRGGRO.RQVWUXLUDQMHL]GHODYDLQ
SUHVNXãDQMH'RSROQLOR =DKWHYH]DNRQVWUXLUDQMHYHOLNLKMHNOHQN]DSOLQHNL
SRY]URþDMRNUKNRVW (1,62 $PG
Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water
capacity between 150 l and 3000 l - Design construction and testing - Amendment 1:
Requirements for design of tubes for embrittling gases (EN ISO 11120:1999/Amd
1:2013)
Ortsbewegliche Gasflaschen - Nahtlose wiederbefüllbare Großflaschen aus Stahl für den
Transport verdichteter Gase mit einem Fassungsvermögen (Wasser) zwischen 150 l und
3 000 l - Gestaltung, Konstruktion und Prüfung - Änderung 1: Anforderungen für die
Gestaltung von Großflaschen für versprödende Gase (EN ISO 11120:1999/Amd 1:2013)
Bouteilles à gaz - Tubes en acier sans soudure rechargeables d'une contenance en eau
de 150 l à 3000 l pour le transport des gaz comprimés - Conception, construction et
essais - Amendement 1 - Exigences de conception des tubes destinés aux gaz
fragilisants (EN ISO 11120:1999/Amd 1:2013)
Ta slovenski standard je istoveten z: EN ISO 11120:1999/A1:2013
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 11120:2000/A1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11120:2000/A1:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 11120:2000/A1:2013
EUROPEAN STANDARD
EN ISO 11120:1999/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2013
ICS 23.020.30
English Version
Gas cylinders - Refillable seamless steel tubes for compressed
gas transport, of water capacity between 150 l and 3000 l -
Design construction and testing - Amendment 1: Requirements
for design of tubes for embrittling gases (EN ISO
11120:1999/Amd 1:2013)
Bouteilles à gaz - Tubes en acier sans soudure Ortsbewegliche Gasflaschen - Nahtlose wiederbefüllbare
rechargeables d'une contenance en eau de 150 l à 3000 l Großflaschen aus Stahl für den Transport verdichteter
pour le transport des gaz comprimés - Conception, Gase mit einem Fassungsvermögen (Wasser) zwischen
construction et essais - Amendement 1 - Exigences de 150 l und 3 000 l - Gestaltung, Konstruktion und Prüfung -
conception des tubes destinés aux gaz fragilisants (EN ISO Änderung 1: Anforderungen für die Gestaltung von
11120:1999/Amd 1:2013) Großflaschen für versprödende Gase (EN ISO
11120:1999/Amd 1:2013)
This amendment A1 modifies the European Standard EN ISO 11120:1999; it was approved by CEN on 22 June 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11120:1999/A1:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11120:2000/A1:2013
EN ISO 11120:1999/A1:2013 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11120:2000/A1:2013
EN ISO 11120:1999/A1:2013 (E)
Foreword
This document (EN ISO 11120:1999/A1:2013) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This Amendment to the European Standard EN ISO 11120:1999 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and
conflicting national standards shall be withdrawn at the latest by January 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for ide
...
SLOVENSKI STANDARD
SIST EN ISO 11120:2000/kFprA1:2011
01-september-2011
Plinske jeklenke - Ponovno polnljive jeklene cevi iz celega za transport stisnjenega
plina vodne prostornine od 150 do 3000 l - Zasnova, izdelava in preskušanje -
Dopolnilo A1 (ISO 11120:1999/DAM 1:2011)
Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water
capacity between 150 l and 3000 l - Design construction and testing - Amendment 1:
Requirements for design of tubes for embrittling gases (ISO 11120:1999/DAM 1:2011)
Ortsbewegliche Gasflaschen - Nahtlose wiederbefüllbare Großflaschen aus Stahl für den
Transport verdichteter Gase mit einem Fassungsvermögen (Wasser) zwischen 150 l und
3 000 l - Gestaltung, Konstruktion und Prüfung - Änderung 1: Anforderungen für die
Gestaltung von Großflaschen für versprödende Gase (ISO 11120:1999/DAM 1:2011)
Bouteilles à gaz - Tubes en acier sans soudure rechargeables d'une contenance en eau
de 150 l à 3000 L - Conception, construction et essais - Les conditions pour la
conception de tubes pour les gaz d'embrittling (ISO 11120:1999/DAM 1:2011)
Ta slovenski standard je istoveten z: EN ISO 11120:1999/FprA1
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 11120:2000/kFprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11120:2000/kFprA1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 11120:2000/kFprA1:2011
EUROPEAN STANDARD
DRAFT
EN ISO 11120:1999
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2011
ICS 23.020.30
English Version
Gas cylinders - Refillable seamless steel tubes for compressed
gas transport, of water capacity between 150 l and 3000 l -
Design construction and testing - Amendment 1: Requirements
for design of tubes for embrittling gases (EN ISO
11120:1999/DAM 1:2011)
Bouteilles à gaz - Tubes en acier sans soudure Ortsbewegliche Gasflaschen - Nahtlose wiederbefüllbare
rechargeables d'une contenance en eau de 150 l à 3000 L - Großflaschen aus Stahl für den Transport verdichteter
Conception, construction et essais - Les conditions pour la Gase mit einem Fassungsvermögen (Wasser) zwischen
conception de tubes pour les gaz d'embrittling (EN ISO 150 l und 3 000 l - Gestaltung, Konstruktion und Prüfung -
11120:1999/DAM 1:2011) Änderung 1: Anforderungen für die Gestaltung von
Großflaschen für versprödende Gase (EN ISO
11120:1999/DAM 1:2011)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 23.
This draft amendment A1, if approved, will modify the European Standard EN ISO 11120:1999. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11120:1999/prA1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11120:2000/kFprA1:2011
EN ISO 11120:1999/prA1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11120:2000/kFprA1:2011
EN ISO 11120:1999/prA1:2011 (E)
Foreword
This document (EN ISO 11120:1999/prA1:2011) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This document is currently submitted to the CEN parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
Endorsement notice
The text of ISO 11120:1999/DAM 1:2011 has been approved by CEN as a EN ISO 11120:1999/prA1:2011
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11120:2000/kFprA1:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 11120:2000/kFprA1:2011
DRAFT AMENDMENT ISO 11120:1999/DAM 1
ISO/TC 58/SC 3 Secretariat: BSI
Voting begins on Voting terminates on
2011-05-19 2011-10-19
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Gas cylinders — Refillable seamless steel tubes for compressed
gas transport, of water capacity between 150 l and 3000 l —
Design construction and testing
AMENDMENT 1: Requirements for design of tubes for embrittling
gases
Bouteilles à gaz — Tubes en acier sans soudure rechargeables d'une contenance
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.