SIST EN 62149-4:2010

Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2010)

This part of IEC 62149 covers the performance specification for 1 300 nm fibre optic transceiver modules used for the ISO/IEC 8802-3 Gigabit Ethernet application. The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a “once-off” basis to prove any product’s ability to satisfy the performance standard’s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but should then be controlled by a quality assurance/quality conformance program.

Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 4: 1 300-nm-Lichtwellenleiter-Sendeund Empfangsmodule für Gigabit-Ethernet-Anwendungen (IEC 62149-4:2010)

Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 4: Emetteurs-récepteurs à fibres optiques de 1 300 nm pour application Gigabit Ethernet (CEI 62149-4:2010)

La CEI 62149-4:2010 couvre la spécification de fonctionnement pour les modules d'émetteur-récepteur à fibres optiques de 1 300 nm utilisée pour l'application Gigabit Ethernet de l'ISO/CEI 8802-3. La norme de fonctionnement contient une définition des exigences de fonctionnement de produit ainsi qu'une série de jeux d'essais et de mesures aux conditions, sévérités et critères de succès/défaillances bien définis. Chaque essai est destiné à être effectué une seule fois pour prouver la capacité des produits à satisfaire aux exigences des normes de fonctionnement. Cette deuxième édition annule et remplace la première édition publiée en 2003. Elle constitue une révision technique qui consiste en des modifications et des ajouts aux tableaux décrivant les performances reflétant ainsi les nouvelles technologies.

Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 4. del: 1300 nm oddajnikov in sprejemnikov optičnih vlaken za Gigabit Ethernet uporabo (IEC 62149-4:2010)

Ta del IEC 62149 zajema izvedbeno specifikacijo za 1.300 nm oddajniške in sprejemniške module optičnih vlaken za ISO/IEC 8802-3 Gigabit Ethernet uporabo. Izvedbeni standard vsebuje opredelitev izvedbenih zahtev za proizvod, skupaj z nizom preskusov in meritev z jasno opredeljenimi pogoji, natančnostmi in merili za uspešnost/neuspešnost. Preskusi naj potekajo naenkrat, da se dokaže, da proizvod ustreza zahtevam izvedbenega standarda. Za proizvod, ki izpolnjuje vse zahteve izvedbenega standarda, velja, da je v skladu z izvedbenim standardom, vendar se mora nato nadzorovati s programom zagotavljanja kakovosti/skladnosti s kakovostjo.

General Information

• Status: Published
• Publication Date: 22-Jul-2010
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 22-Jun-2010
• Due Date: 27-Aug-2010
• Completion Date: 23-Jul-2010
• Ref Project: EN 62149-4:2010 - Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application

Relations

• Replaces: SIST EN 62149-4:2004 - Fibre optic active components and devices - Performance standards -- Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
• Effective Date: 29-Jan-2023
• Revised: SIST EN IEC 62149-4:2023 - Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2022)
• Effective Date: 08-Jun-2021
• Revised: SIST EN 62149-4:2004 - Fibre optic active components and devices - Performance standards -- Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
• Effective Date: 04-Jun-2013
• Replaces: SIST EN 62149-4:2004 - Fibre optic active components and devices - Performance standards -- Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62149-4:2010
01-september-2010
1DGRPHãþD
SIST EN 62149-4:2004
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ,]YHGEHQLVWDQGDUGLGHO
QPRGGDMQLNRYLQVSUHMHPQLNRYRSWLþQLKYODNHQ]D*LJDELW(WKHUQHWXSRUDER,(&

Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm
fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2010)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 4: 1 300-nm-
Lichtwellenleiter-Sendeund Empfangsmodule für Gigabit-Ethernet-Anwendungen (IEC
62149-4:2010)
Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 4:
Emetteurs-récepteurs à fibres optiques de 1 300 nm pour application Gigabit Ethernet
(CEI 62149-4:2010)
Ta slovenski standard je istoveten z: EN 62149-4:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 62149-4:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62149-4:2010

---------------------- Page: 2 ----------------------

SIST EN 62149-4:2010

EUROPEAN STANDARD
EN 62149-4

NORME EUROPÉENNE
June 2010
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 62149-4:2003


English version


Fibre optic active components and devices -
Performance standards -
Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
(IEC 62149-4:2010)


Composants et dispositifs actifs à fibres Aktive Lichtwellenleiterbauelemente
optiques - und -geräte -
Normes de fonctionnement - Betriebsverhalten -
Partie 4: Emetteurs-récepteurs à fibres Teil 4: 1 300-nm-Lichtwellenleiter-Sende-
optiques de 1 300 nm pour application und Empfangsmodule für Gigabit-
Gigabit Ethernet Ethernet-Anwendungen
(CEI 62149-4:2010) (IEC 62149-4:2010)




This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62149-4:2010 E

---------------------- Page: 3 ----------------------

SIST EN 62149-4:2010
EN 62149-4:2010 - 2 -
Foreword
The text of document 86C/912/CDV, future edition 2 of IEC 62149-4, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62149-4 on 2010-06-01.
This European Standard supersedes EN 62149-4:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62149-4:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62149-4:2010
- 3 - EN 62149-4:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)


IEC 60068-2-20 - Environmental testing - EN 60068-2-20 -
Part 2-20: Tests - Test T: Test methods for
solderability and resistance to soldering heat
of devices with leads


IEC 60068-2-27 - Environmental testing - EN 60068-2-27 -
Part 2-27: Tests - Test Ea and guidance:
Shock


IEC 60068-2-38 - Environmental testing - EN 60068-2-38 -
Part 2-38: Tests - Test Z/AD: Composite
temperature/humidity cyclic test


IEC 60068-2-78 - Environmental testing - EN 60068-2-78 -
Part 2-78: Tests - Test Cab: Damp heat,
steady state


IEC 60749-25 - Semiconductor devices - Mechanical and EN 60749-25 -
climatic test methods -
Part 25: Temperature cycling


IEC 60749-26 - Semiconductor devices - Mechanical and EN 60749-26 -
climatic test methods -
Part 26: Electrostatic discharge (ESD)
sensitivity testing - Human body model (HBM)


IEC 60825-1 - Safety of laser products - EN 60825-1 -
Part 1: Equipment classification and
requirements


IEC 60938-1 - Fixed inductors for electromagnetic EN 60938-1 -
interference suppression -
Part 1: Generic specification


IEC 60950-1 (mod) 2001 Information technology equipment - Safety - EN 60950-1 2001
Part 1: General requirements + corr. December 2007
+ A11 2004


IEC 61300-2-47 - Fibre optic interconnecting devices and EN 61300-2-47 -
passive components - Basic test and
measurement procedures -
Part 2-47: Tests - Thermal shocks

---------------------- Page: 5 ----------------------

SIST EN 62149-4:2010
EN 62149-4:2010 - 4 -
Publication Year Title EN/HD Year

ISO/IEC 8802-3 2000 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications

---------------------- Page: 6 ----------------------

SIST EN 62149-4:2010
IEC 62149-4
®
Edition 2.0 2010-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Fibre optic active components and devices – Performance standards –
Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application

Composants et dispositifs actifs à fibres optiques – Normes de
fonctionnement –
Partie 4: Emetteurs-récepteurs à fibres optiques de 1 300 nm pour application
Gigabit Ethernet

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
N
CODE PRIX
ICS 33.180.20 ISBN 978-2-88910-633-2
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62149-4:2010
– 2 – 62149-4 © IEC:2010
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Symbols and abbreviated terms.7
3.1 Symbols .7
3.2 Abbreviated terms .7
4 Product parameters .8
4.1 Absolute limiting ratings .8
4.2 Operating environment .8
4.3 Functional specification .8
4.4 Diagrams.10
4.5 Labelling .11
5 Testing .11
5.1 General .11
5.2 Characterization testing.11
5.3 Performance testing .12
5.3.1 Sequence of testing.12
5.3.2 Sample size, sequencing and groupings .12
6 Environmental specifications .14
6.1 General safety.14
6.2 Laser safety .14
6.3 Electromagnetic emission.14
Annex A (normative) Sample size, sequencing and grouping requirements .15

Figure 1 – Receiver section schematic.10
Figure 2 – Transmitter section schematic.11

Table 1 – Absolute limiting ratings .8
Table 2 – Operating environment .8
Table 3 – Receiver section: functional specification .9
Table 4 – Transmitter section: functional specification .10
Table 5 – Transmitter section characterization tests .12
Table 6 – Receiver section characterization tests .12
Table 7 – Performance test plan .13

---------------------- Page: 8 ----------------------

SIST EN 62149-4:2010
62149-4 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –

Part 4: 1 300 nm fibre optic transceivers
for Gigabit Ethernet application


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62149-4 has been prepared by subcommittee 86C: Fibre optic
active devices, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
CDV Report on voting
86C/912/CDV 86C/949/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This second edition cancels and replaces the first edition published in 2003. It constitutes a
technical revision that includes changes and additions to the performance tables reflecting
new technology.

---------------------- Page: 9 ----------------------

SIST EN 62149-4:2010
– 4 – 62149-4 © IEC:2010
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 62149 series, published under the general title Fibre optic active
components and devices – Performance standards, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 62149-4:2010
62149-4 © IEC:2010 – 5 –
INTRODUCTION
Fibre optic transceivers are used to convert electrical signals into optical signals and vice
versa. This specification covers the performance standard for 1 300 nm fibre optic trans-
ceivers for Gigabit Ethe
...