SIST EN 62149-4:2004
(Main)Fibre optic active components and devices - Performance standards -- Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
Fibre optic active components and devices - Performance standards -- Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
Provides the performance specification for 1 300 nm fibre optic transceiver modules used for the ISO/EN 8802-3 Gigabit Ethernet application. The product performance requirements are defined, together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria.
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten -- Teil 4: 1 300-nm-Lichtwellenleiter-Sende- und Empfangsmodule für Gigabit-Ethernet- Anwendungen
Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement -- Partie 4: Emetteurs-récepteurs à fibres optiques de 1 300 nm pour application Gigabit Ethernet
Couvre la spécification de fonctionnement pour les modules d'émetteur-récepteur à fibres optiques de 1 300 nm utilisée pour l'application Gigabit Ethernet de l'ISO/EN 8802-3. Contient une définition des prescriptions de fonctionnement de produit ainsi qu'une série de jeux d'essais et de mesures aux conditions, sévérités et critères de succès/défaillances bien définis.
Aktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 4. del: 1300 nm oddajnikov in sprejemnikov optičnih vlaken za Gigabit Ethernet uporabo (IEC 62149-4:2003 + popravek 2003)*
General Information
Relations
Standards Content (Sample)
SIST EN 62149-4:2004SLOVENSKIseptember 2004
STANDARDAktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 4. del: 1300 nm oddajnikov in sprejemnikov optičnih vlaken za Gigabit Ethernet uporabo (IEC 62149-4:2003 + popravek 2003)*Fibre optic active components and devices - Performance standards - Part 4: 1300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2003 + corrigendum 2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 62149-4:2004(en)ICS33.180.20
EUROPEAN STANDARD
EN 62149-4 NORME EUROPÉENNE EUROPÄISCHE NORM
May 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62149-4:2003 E
ICS 33.180.20
English version
Fibre optic active components and devices –
Performance standards Part 4: 1 300 nm fibre optic transceivers
for Gigabit Ethernet application (IEC 62149-4:2003 + corrigendum 2003)
Composants et dispositifs actifs
à fibres optiques –
Normes de fonctionnement Partie 4: Emetteurs-récepteurs
à fibres optiques de 1 300 nm
pour application Gigabit Ethernet (CEI 62149-4:2003 + corrigendum 2003)
Aktive Lichtwellenleiterbauelemente - Betriebsverhalten Teil 4: 1 300-nm-Lichtwellenleiter-Sende- und Empfangsmodule für Gigabit-Ethernet- Anwendungen (IEC 62149-4:2003 + Corrigendum 2003)
This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EN 62149-4:2003 - 2 - Foreword The text of document 86C/477/FDIS, future edition 1 of IEC 62149-4, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62149-4 on 2003-03-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2003-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-03-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A and ZA are normative.
Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62149-4:2003 and its corrigendum April 2003 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 62149-4:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-20 - 1) Basic environmental testing proceduresPart 2: Tests - Test T: Soldering
HD 323.2.20 S3 1988 2) IEC 60825-1 - 1) Safety of laser products Part 1: Equipment classification, requirements and user's guide
EN 60825-1 1994 2) IEC 60938-1 - 1) Fixed inductors for electromagnetic interference suppression Part 1: Generic specification
EN 60938-1 1999 2) IEC 60950-1 (mod) 2001 Information technology equipment - Safety Part 1: General requirements
EN 60950-1 2001
ISO/IEC 8802-3 2001 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
- - MIL-STD-883D 1991 Test Method Standard - Microcircuits
- -
1) Undated reference. 2) Valid edition at date of issue.
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD62149-4Première éditionFirst edition2003-01Composants et dispositifs actifs à fibres optiques –Normes de fonctionnement –Partie 4:Emetteurs-récepteurs à fibres optiquesde 1 300 nm pour applications Gigabit EthernetFibre optic active components and devices –Performance standards –Part 4:1 300 nm fibre optic transceiversfor Gigabit Ethernet applicationPour prix, voir catalogue en vigueurFor price, see current catalogue© IEC 2003
Droits de reproduction réservés
⎯
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCODE PRIXPRICE CODENCommission Electrotechnique InternationaleInternational Electrotechnical Commission
62149-4 © IEC:2003– 3 –CONTENTSFOREWORD.5INTRODUCTION.91Scope.112Normative references.113Symbols and abreviated terms.133.1Symbols.133.2Abbreviated terms.134Product parameters.134.1Absolute limiting ratings.134.2Operating environment.154.3Functional specification.154.4Diagrams.104.5Labelling.215Testing.215.1Characterisation testing.215.2Performance testing.236Environmental specifications.276.1General safety.276.2Laser safety.276.3Electromagnetic emission.27Annex A (normative)
Sample size, sequencing and grouping requirements.29Figure 1 – Receiver section schematic.19Figure 2 – Transmitter section schematic.21Table 1 – Absolute limiting ratings.15Table 2 – Operating environment.15Table 3 – Receiver section: functional specification.17Table 4 – Transmitter section: functional specification.17Table 5 – Transmitter section characterisation tests.23Table 6 – Receiver section characterisation tests.23Table 7 – Performance test plan.25
62149-4 © IEC:2003– 5 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –PERFORMANCE STANDARDS –Part 4: 1 300 nm fibre optic transceiversfor Gigabit Ethernet applicationFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the InternationalOrganization for Standardization (ISO) in accordance with conditions determined by agreement between thetwo organizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)
In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)
The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 62149-4 has been prepared by subcommittee 86C: Fibre opticsystems and active devices, of IEC technical committee 86: Fibre optics.The text of this standard is based on the following documents:FDISReport on voting86C/477/FDIS86C/497/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.This standard constitutes part 4 of the IEC 62149 series, published under the general titleFibre optic active components and devices – Performance standards. This series consists ofPart 1, devoted to general requirements, and various additional parts, specific to individualmodule families.Part 1:General and guidancePart 2:Discrete vertical cavity surface emitting laser devicesPart 3:2,5 Gbit/s modulator-integrated laser diode transmitters
62149-4 © IEC:2003– 7 –Part 4:1300-nm transceivers for Gigabit Ethernet applicationPart 5:ATM-PON transceivers with LD driver circuits and CDR ICsPart 6:650-nm 250-Mbit/s plastic optical fibre transceiversThe committee has decided that the contents of this publication will remain unchanged until2009. At this date, the publication will be•reconfirmed;•withdrawn;•replaced by a revised edition, or•amended.The contents of the corrigendum of April 2003 have been included in this copy.
62149-4 © IEC:2003– 9 –INTRODUCTIONFibre optic transceivers are used to convert electrical signals into optical signals and viceversa. This specification covers the performance standard for 1 300 nm fibre optic trans-ceivers for Gigabit Ethernet application. The ISO/IEC 8802-3 Gigabit Ethernet standard isused as the basis for determining the optical characteristics of the transceiver, which operateswith a line rate of 1,25 Gbit/s.
62149-4 © IEC:2003– 11 –FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –PERFORMANCE STANDARDS –Part 4: 1 300 nm fibre optic transceiversfor Gigabit Ethernet application1 ScopeThis part of IEC 62149 covers the performance specification for 1 300 nm fibre optictransceiver modules used for the ISO/IEC 8802-3 Gigabit Ethernet application. The perform-ance standard contains a definition of the product performance requirements together with aseries of sets of tests and measurements with clearly defined conditions, severities, andpass/fail criteria. The tests are intended to be run on a “once-off” basis to prove any product’sability to satisfy the performance standard’s requirements.A product that has been shown to meet all the requirements of a performance standard canbe declared as complying with the performance standard, but should then be controlled by aquality assurance/quality conformance program.2 Normative referencesThe following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.IEC 60068-2-20, Environmental testing. Part 2: Tests. Test T: SolderingIEC 60825-1, Safety of laser products – Part 1: Equipment classification, requirements anduser's guideIEC 60938-1, Fixed inductor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.