SIST EN 4124:2005
(Main)Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C
This standard specifies the characteristics of self-locking shank nuts in NI-PH1302, silver plated on thread, for use in 60° cone holes, for aerospace applications.
Classification: 1 210 MPa ) / 730 °C )
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH1302 (Waspaloy), Gewinde versilbert, für 60° Aufweitung - Klasse: 1 210 MPa (bei Raumtemperatur) / 730 °C
Diese Norm legt die Eigenschaften von selbstsichernden Einnietmuttern aus NI-PH1302, Gewinde versilbert, für den Gebrauch bei konischen Bohrungen von 60° für Anwendungen in der Luft- und Raumfahrt fest.
Klasse: 1 210 MPa ) / 730 °C )
Série aérospatiale - Écrous a sertir, a freinage interne, en alliage résistant a chaud a base de nickel NI-PH1302 (Waspaloy), argentés sur filetage, pour sertissage 60° - Classification : 1 210 MPa (a température ambiante ) / 730 °C
La présente norme spécifie les caractéristiques des écrous a sertir, a freinage interne, en NI PH1302, argentés sur filetage, pour utilisation dans des trous coniques de 60°, pour applications aérospatiales.
Classification : 1 210 MPa ) / 730 °C ).
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4124:2005
01-junij-2005
1DGRPHãþD
SIST EN 4124:2004
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-
PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210
MPa (at ambient temperature) / 730 °C
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-
PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa
(at ambient temperature) / 730 °C
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-PH1302 (Waspaloy), Gewinde versilbert, für 60° Aufweitung -
Klasse: 1 210 MPa (bei Raumtemperatur) / 730 °C
Série aérospatiale - Écrous a sertir, a freinage interne, en alliage résistant a chaud a
base de nickel NI-PH1302 (Waspaloy), argentés sur filetage, pour sertissage 60° -
Classification : 1 210 MPa (a température ambiante ) / 730 °C
Ta slovenski standard je istoveten z: EN 4124:2004
ICS:
49.030.30 Matice Nuts
SIST EN 4124:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4124:2005
---------------------- Page: 2 ----------------------
SIST EN 4124:2005
EUROPEAN STANDARD
EN 4124
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 49.030.30 Supersedes EN 4124:2003
English version
Aerospace series - Shank nuts, self-locking, in heat resisting
nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread,
for 60° swage - Classification: 1 210 MPa (at ambient
temperature) / 730° C
Série aérospatiale - Écrous à sertir, à freinage interne, en Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus
alliage résistant à chaud à base de nickel NI-PH1302 hochwarmfester Nickelbasislegierung NI-PH1302
(Waspaloy), argentés sur filetage, pour sertissage 60° - (Waspaloy), Gewinde versilbert, für 60° Aufweitung -
Classification : 1 210 MPa (à température ambiante ) / 730° Klasse: 1 210 MPa (bei Raumtemperatur) / 730° C
C
This European Standard was approved by CEN on 11 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4124:2004: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4124:2005
EN 4124:2004 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Required characteristics.4
4 Designation .6
5 Marking .6
6 Technical specification .6
2
---------------------- Page: 4 ----------------------
SIST EN 4124:2005
EN 4124:2004 (E)
Foreword
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.