SIST EN 301 843-2 V2.1.1:2016

• Abstract:

  The present document together with ETSI EN 301 843-1 [1], covers the assessment of VHF radiotelephone transmitters; and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility; (EMC).; Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone; transmitters and receivers are not included in the present document. Such technical specifications are found in the; related product standards for the effective use of the radio spectrum.; The present document specifies the applicable test conditions, performance assessment, and performance criteria for; VHF radiotelephone transmitters and receivers for the maritime mobile service, and the associated ancillary equipment.; Examples of types of radiotelephone transmitters and receivers for the maritime mobile service covered by the present; document are given in annex A.; In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present; document and ETSI EN 301 843-1 [1], the provisions of the present document take precedence.; The electromagnetic environment used in the present document to develop the technical specifications encompasses the; electromagnetic environment on-board ships as identified in CENELEC EN 60945 [i.5].

• Status: Published
• Public Enquiry End Date: 20-Mar-2016
• Publication Date: 13-Apr-2016
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Apr-2016
• Due Date: 13-Jun-2016
• Completion Date: 14-Apr-2016
• Ref Project: ETSI EN 301 843-2 V2.1.1 (2016-03) - ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Harmonised Standard covering the essential requirements of article 3.1b of the Directive 2014/53/EU; Part 2: Specific conditions for VHF radiotelephone transmitters and receivers

Overview

SIST EN 301 843-2 V2.1.1:2016 is a harmonised European standard that specifies requirements for the ElectroMagnetic Compatibility (EMC) of VHF radiotelephone transmitters and receivers used in maritime mobile services. Developed by SIST and aligned with ETSI EN 301 843 series, this standard supports compliance with the essential requirements of Article 3.1b of the Directive 2014/53/EU (Radio Equipment Directive - RED).

The standard covers assessment processes, test conditions, and performance criteria that ensure VHF marine radiotelephone equipment and their ancillary devices operate reliably and do not cause harmful electromagnetic interference when installed on ships. This facilitates safe maritime communications and ensures equipment compatibility with the electromagnetic environment as defined in related maritime standards.

Key Topics

• Scope of Application: Focuses specifically on the EMC requirements for VHF radiotelephone equipment and associated ancillary equipment for maritime mobile service, operating typically in the 156 MHz to 174 MHz frequency range.
• Compliance Requirements: Ensures that marine radio equipment meets the essential EMC requirements under the RED, facilitating presumption of conformity for manufacturers.
• Test Conditions and Performance Assessment: Covers necessary test setups, performance checks, and criteria for firm evaluation of both transmitters and receivers, including equipment that provides continuous or non-continuous communication links.
• Special Testing Conditions: Details special immunity and emission test arrangements, including specified input levels and exclusion bands for both receivers and transmitters to avoid misleading test results.
• Relationship with Common Standards: Works in conjunction with ETSI EN 301 843-1, which defines common technical EMC requirements for marine radio equipment.

Applications

This standard is essential for:

• Manufacturers of Marine VHF Radios: Required for product development, type approval, and market access within the European Economic Area.
• Maritime Operators and Shipbuilders: Ensures onboard communication equipment does not interfere with other electronic systems and is compliant with maritime safety regulations.
• Test Laboratories and Conformity Assessment Bodies: Forms the technical basis for EMC testing and certification of marine VHF radiotelephone transmitters, receivers, and similar equipment.
• Suppliers of Ancillary Equipment: Applies to associated equipment such as handsets, speaker-microphones, and control units intended for use with VHF radios on ships.

Adopting this standard helps ensure:

• Reliable marine communications critical for navigation and safety at sea
• Reduced risk of electromagnetic interference between onboard systems
• Alignment with legal requirements for CE marking under the Radio Equipment Directive

Related Standards

• ETSI EN 301 843-1: Common technical requirements for EMC in marine radio equipment and services.
• CENELEC EN 60945: General requirements for maritime navigation and radiocommunication equipment, including methods of EMC testing.
• ETSI EN 302 885: EMC requirements for portable VHF radiotelephone equipment for maritime services.
• ETSI EN 301 025: Requirements for VHF radiotelephone equipment with Digital Selective Calling (DSC) for marine use.
• Directive 2014/53/EU (RED): Broad regulatory framework for radio equipment in the EU, with specific references to EMC compliance.

Summary

The SIST EN 301 843-2 V2.1.1:2016 standard offers a clear framework for demonstrating EMC compliance of marine VHF radiotelephone transmitters and receivers. By fulfilling these requirements, manufacturers and maritime stakeholders can ensure both regulatory conformity and the safe, effective operation of essential maritime communication systems. This contributes to efficient, interference-free shipboard operations and reliable communications across the maritime sector.

Draft ETSI EN 301 843-2 V2.1.0 (2015-12)

HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC) standard
for marine radio equipment and services;
Harmonised Standard covering the essential requirements of
article 3.1b of the Directive 2014/53/EU;
Part 2: Specific conditions for VHF radiotelephone transmitters
and receivers
2 Draft ETSI EN 301 843-2 V2.1.0 (2015-12)

Reference
REN/ERM-EMC-348
Keywords
EMC, maritime, regulation, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Draft ETSI EN 301 843-2 V2.1.0 (2015-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 General and operational requirements . 7
4.1 Environmental profile . 7
4.2 Arrangements for test signals . 7
4.2.0 General . 7
4.2.1 Arrangements for test signals at the input of the transmitter . 8
4.2.2 Arrangements for test signals at the output of the transmitter . 8
4.2.3 Arrangements for test signals at the input of the receiver . 8
4.2.4 Arrangements for test signals at the output of the receiver . 8
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 8
4.3 Exclusion bands . 8
4.3.0 General . 8
4.3.1 Exclusion bands for receivers and receiver parts of transceivers . 8
4.3.2 Exclusion band for transmitters . 8
4.4 Narrow band responses on receivers . 8
4.5 Normal test modulation . 9
5 Performance assessment . 9
5.1 General . 9
5.2 Equipment which can provide a continuous communication link . 9
5.3 Equipment which does not provide a continuous communication link . 9
5.4 Ancillary equipment . 9
5.5 Equipment classification . 9
6 Performance criteria . 9
6.0 General . 9
6.1 Performance criteria A for continuous phenomena applied to transmitters and receivers. 9
6.2 Performance criteria B for transient phenomena applied to transmitters and receivers . 10
6.3 Performance criteria C applied to power supply failure . 10
6.4 Performance check . 10
6.4.0 General . 10
6.4.1 Transmitter . 10
6.4.2 Receiver . 10
6.5 Performance criteria for equipment which does not provide a continuous communication link . 10
6.6 Performance criteria for ancillary equipment tested on a stand-alone basis . 11
7 Applicability overview . 11
7.1 Emission . 11
7.1.1 General . 11
7.1.2 Special conditions . 11
7.2 Immunity . 11
7.2.1 General . 11
7.2.2 Special conditions . 11
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 12
ETSI
4 Draft ETSI EN 301 843-2 V2.1.0 (2015-12)
Annex B (informative): Examples of types of marine radiotelephone equipment in the scope
of the present document . 13
B.0 General . 13
B.1 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF
bands. 13
History . 14

ETSI
5 Draft ETSI EN 301 843-2 V2.1.0 (2015-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared in reply to the Commission's standardisation request Commission
Implementing Decision C(2015) 5376 final of 04.08.2015 to provide a means of conforming to the essential
requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making
available on the market of radio equipment.
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 of [1] confers, within the limits of the scope of the
present document, a presumption of conformity with the corresponding essential requirements of that Directive, and
associated EFTA regulations.
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
6 Draft ETSI EN 301 843-2 V2.1.0 (2015-12)
1 Scope
The present document together with ETSI EN 301 843-1 [1], covers the assessment of VHF radiotelephone transmitters
and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility
(EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone
transmitters and receivers are not included in the present document. Such technical specifications are found in the
related product standards for the effective use of the radio spectrum.
The present
...

HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC) standard
for marine radio equipment and services;
Harmonised Standard covering the essential requirements
of article 3.1b of the Directive 2014/53/EU;
Part 2: Specific conditions for VHF radiotelephone
transmitters and receivers
2 ETSI EN 301 843-2 V2.1.1 (2016-03)

Reference
REN/ERM-EMC-348
Keywords
EMC, maritime, radio, regulation, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 301 843-2 V2.1.1 (2016-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 General and operational requirements . 7
4.1 Environmental profile . 7
4.2 Arrangements for test signals . 7
4.2.0 General . 7
4.2.1 Arrangements for test signals at the input of the transmitter . 8
4.2.2 Arrangements for test signals at the output of the transmitter . 8
4.2.3 Arrangements for test signals at the input of the receiver . 8
4.2.4 Arrangements for test signals at the output of the receiver . 8
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 8
4.3 Exclusion bands . 8
4.3.0 General . 8
4.3.1 Exclusion bands for receivers and receiver parts of transceivers . 8
4.3.2 Exclusion band for transmitters . 8
4.4 Narrow band responses on receivers . 8
4.5 Normal test modulation . 9
5 Performance assessment . 9
5.1 General . 9
5.2 Equipment which can provide a continuous communication link . 9
5.3 Equipment which does not provide a continuous communication link . 9
5.4 Ancillary equipment . 9
5.5 Equipment classification . 9
6 Performance criteria . 9
6.0 General . 9
6.1 Performance criteria A for continuous phenomena applied to transmitters and receivers. 9
6.2 Performance criteria B for transient phenomena applied to transmitters and receivers . 10
6.3 Performance criteria C applied to power supply failure . 10
6.4 Performance check . 10
6.4.0 General . 10
6.4.1 Transmitter . 10
6.4.2 Receiver . 10
6.5 Performance criteria for equipment which does not provide a continuous communication link . 10
6.6 Performance criteria for ancillary equipment tested on a stand-alone basis . 11
7 Applicability overview . 11
7.1 Emission . 11
7.1.1 General . 11
7.1.2 Special conditions . 11
7.2 Immunity . 11
7.2.1 General . 11
7.2.2 Special conditions . 11
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 12
ETSI
4 ETSI EN 301 843-2 V2.1.1 (2016-03)
Annex B (informative): Examples of types of marine radiotelephone equipment in the scope
of the present document . 13
B.0 General . 13
B.1 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF
bands. 13
History . 14

ETSI
5 ETSI EN 301 843-2 V2.1.1 (2016-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.7] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 of ETSI EN 301 843-1 [1] confers, within the limits of
the scope of the present document, a presumption of conformity with the corresponding essential requirements of that
Directive, and associated EFTA regulations.
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 21 March 2016
Date of latest announcement of this EN (doa): 30 June 2016
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2016
Date of withdrawal of any conflicting National Standard (dow): 31 December 2017

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
6 ETSI EN 301 843-2 V2.1.1 (2016-03)
1 Scope
The present document together with ETSI EN 301 843-1 [1], covers the assessment of VHF radiotelephone transmitters
and receivers for the maritime mobile service, and ancillary equipment in respect of ElectroMagnetic Compatibility
(EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of marine radiotelephone
transmitters and receivers are not included in the present document. Such technical specifications are found in the
related product standards for the effective use of the radio spectrum.
The present document specifies the ap
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSUHMHPQLNHElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1b of the Directive 2014/53/EU - Part 2: Specific conditions for VHF radiotelephone transmitters and receivers47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETSI EN 301 843-2 V2.1.1 (2016-03)SIST EN 301 843-2 V2.1.1:2016en01-junij-2016SIST EN 301 843-2 V2.1.1:2016SLOVENSKI
STANDARD
HARMONISED EUROPEAN STANDARD SIST EN 301 843-2 V2.1.1:2016

ETSI ETSI EN 301 843-2 V2.1.1 (2016-03) 2
Reference REN/ERM-EMC-348 Keywords EMC, maritime, radio, regulation, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 843-2 V2.1.1:2016

ETSI ETSI EN 301 843-2 V2.1.1 (2016-03) 3 Contents Intellectual Property Rights . 5 Foreword . 5 Modal verbs terminology . 5 1 Scope . 6 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions, symbols and abbreviations . 7 3.1 Definitions . 7 3.2 Symbols . 7 3.3 Abbreviations . 7 4 General and operational requirements . 7 4.1 Environmental profile . 7 4.2 Arrangements for test signals . 7 4.2.0 General . 7 4.2.1 Arrangements for test signals at the input of the transmitter . 8 4.2.2 Arrangements for test signals at the output of the transmitter . 8 4.2.3 Arrangements for test signals at the input of the receiver . 8 4.2.4 Arrangements for test signals at the output of the receiver . 8 4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 8 4.3 Exclusion bands . 8 4.3.0 General . 8 4.3.1 Exclusion bands for receivers and receiver parts of transceivers . 8 4.3.2 Exclusion band for transmitters . 8 4.4 Narrow band responses on receivers . 8 4.5 Normal test modulation . 9 5 Performance assessment . 9 5.1 General . 9 5.2 Equipment which can provide a continuous communication link . 9 5.3 Equipment which does not provide a continuous communication link . 9 5.4 Ancillary equipment . 9 5.5 Equipment classification . 9 6 Performance criteria . 9 6.0 General . 9 6.1 Performance criteria A for continuous phenomena applied to transmitters and receivers. 9 6.2 Performance criteria B for transient phenomena applied to transmitters and receivers . 10 6.3 Performance criteria C applied to power supply failure . 10 6.4 Performance check . 10 6.4.0 General . 10 6.4.1 Transmitter . 10 6.4.2 Receiver . 10 6.5 Performance criteria for equipment which does not provide a continuous communication link . 10 6.6 Performance criteria for ancillary equipment tested on a stand-alone basis . 11 7 Applicability overview . 11 7.1 Emission . 11 7.1.1 General . 11 7.1.2 Special conditions . 11 7.2 Immunity . 11 7.2.1 General . 11 7.2.2 Special conditions . 11 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 12 SIST EN 301 843-2 V2.1.1:2016

ETSI ETSI EN 301 843-2 V2.1.1 (2016-03) 4 Annex B (informative): Examples of types of marine radiotelephone equipment in the scope of the present document . 13 B.0 General . 13 B.1 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands. 13 History . 14
ETSI ETSI EN 301 843-2 V2.1.1 (2016-03) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.7] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.2]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 of ETSI EN 301 843-1 [1] confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 21 March 2016 Date of latest announcement of this EN (doa): 30 June 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 December 2016 Date of withdrawal of any conflicting National Standard (dow): 31 December 2017
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI ETSI EN 301 843-2 V2.1.1 (2016-03) 6 1 Scope The present document together with ETSI EN 301 843-1 [1], covers the assessment o
...