iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60034-3:1999

(Main)

Rotating electrical machines -- Part 3: Specific requirements for turbine-type synchronous machines

Rotating electrical machines -- Part 3: Specific requirements for turbine-type synchronous machines

Applies to three-phase turbine-type machines, with rated outputs of 10 MVA and above, used as generators.

Drehende elektrische Maschinen -- Teil 3: Besondere Anforderungen an Dreiphasen-Turbogeneratoren

Machines électriques tournantes -- Partie 3: Règles spécifiques pour les turbomachines synchrones

S'applique aux turbomachines triphasées de puissance assignée supérieure ou égale à 10 MVA, utilisées en alternateurs.

Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines (IEC 60034-3:1988)

General Information

Status
Withdrawn
Publication Date
31-Mar-1999
Withdrawal Date
31-Dec-2005
ICS
29.160.20 - Generators
Technical Committee
ERS - Rotating machinery
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jan-2006
Due Date
01-Jan-2006
Completion Date
01-Jan-2006
Ref Project
EN 60034-3:1995 - Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines

Relations

Revised
SIST EN 60034-3:2006 - Rotating electrical machines -- Part 3: Specific requirements for cylindrical rotor synchronous machines
Effective Date
13-May-2010
Replaced By
SIST EN 60034-3:2006 - Rotating electrical machines -- Part 3: Specific requirements for cylindrical rotor synchronous machines
Effective Date
29-Jan-2023
Replaced By
SIST EN 60034-3:2006 - Rotating electrical machines -- Part 3: Specific requirements for cylindrical rotor synchronous machines
Effective Date
07-Jun-2022

Buy Standard

EN 60034-3:1999EN 60034-3:1999
PreviousNext
Standard
EN 60034-3:1999
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 60034-3:1999 - pri IEC-ju manjkajo strani:3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 45EN 60034-3:1999 - pri IEC-ju manjkajo strani:3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 45
PreviousNext
Standard
EN 60034-3:1999 - pri IEC-ju manjkajo strani:3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 45
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60034-3:1999
01-april-1999
Rotating electrical machines - Part 3: Specific requirements for turbine-type
synchronous machines (IEC 60034-3:1988)
Rotating electrical machines -- Part 3: Specific requirements for turbine-type
synchronous machines
Drehende elektrische Maschinen -- Teil 3: Besondere Anforderungen an Dreiphasen-
Turbogeneratoren
Machines électriques tournantes -- Partie 3: Règles spécifiques pour les turbomachines
synchrones
Ta slovenski standard je istoveten z: EN 60034-3:1995
ICS:
29.160.20 Generatorji Generators
SIST EN 60034-3:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60034-3:1999

---------------------- Page: 2 ----------------------
SIST EN 60034-3:1999

---------------------- Page: 3 ----------------------
SIST EN 60034-3:1999

---------------------- Page: 4 ----------------------
SIST EN 60034-3:1999

---------------------- Page: 5 ----------------------
SIST EN 60034-3:1999

---------------------- Page: 6 ----------------------
SIST EN 60034-3:1999

---------------------- Page: 7 ----------------------
SIST EN 60034-3:1999





Publication 60034-3 de la CEI IEC Publication 60034-3

(Quatrième édition) (Fourth edition)

Machines électriques tournantes – Rotating electrical machines –

Troisième partie: Règles spécifiques pour les Part 3: Specific requirements for turbine-type

turbomachines synchrones synchronous machines



CORRIGENDUM 1


Page 18 Page 19
Article 14: Clause 14:
Au lieu de Instead of
2 2
II−=t 37,s5 II−=t 37,s5
() ()
lire read
2 2
It−=137,s5 It−=137,s5
() ()
Page 20 Page 21
Article 16.1: Clause 16.1
Dans la première ligne, au lieu de In the first line, instead of
....dans les articles 18... ...in clauses 18...
lire read
....dans les articles 19... ...in clauses 19...

Décembre 1997 December 1997

---------------------- Page: 8 --
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines (IEC 60034-3:1988)Drehende elektrische Maschinen -- Teil 3: Besondere Anforderungen an Dreiphasen-TurbogeneratorenMachines électriques tournantes -- Partie 3: Règles spécifiques pour les turbomachines synchronesRotating electrical machines -- Part 3: Specific requirements for turbine-type synchronous machines29.160.20GeneratorjiGeneratorsICS:Ta slovenski st
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60034-33:2022(Main)
Rotating electrical machines - Part 33: Synchronous hydrogenerators including motor-generators - Specific requirements (IEC 60034-33:2022)
EN IEC 60034-33:2022

This part of IEC 60034 applies to three-phase salient-pole synchronous generators and synchronous motor-generators for hydraulic turbine and pump-turbine applications, that have rated frequency of 50 Hz or 60 Hz, rated output of 10 MVA and above, pole pair number 3 and above, and rated voltage of 6 kV and above.
This document supplements basic requirements for rotating machines given in IEC 60034-1.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60034-3:2020(Main)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators (IEC 60034-3:2020)
EN IEC 60034-3:2020

This part of IEC 60034 applies to large three-phase synchronous generators, having rated
outputs of 10 MVA and above driven by steam turbines or combustion gas turbines. Also
included are synchronous Mvar compensators of the same output range connected to a grid for
the purpose of exchanging reactive power.
This document supplements basic requirements for rotating machines given in IEC 60034-1.
Common requirements are specified together with specific requirements for air, hydrogen or
liquid cooled synchronous generators or compensators.
This document also gives the precautions to be taken when using hydrogen cooled generators
including:
• rotating exciters driven by synchronous generators;
• auxiliary equipment needed for operating the generators;
• parts of the building where hydrogen might accumulate.
These requirements also apply to a synchronous generator driven by both a steam turbine and
a combustion gas turbine as part of a single shaft combined cycle unit.
These requirements do not apply to synchronous generators driven by water (hydraulic)
turbines or wind turbines.
NOTE The precautions taken when using hydrogen are valid for all cases where hydrogen is used as a coolant.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-2-6:2003(Main)
Guide for procurement of power station equipment -- Part 2-6: Electrical equipment - Generators
EN 45510-2-6:2000

This standard gives guidance on writing the technical specification for the procurement of turbine-driven generators and their auxiliaries for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
The generators may be air, hydrogen, or liquid-cooled.  The excitation system may be of the static or rotating rectifier type fed by a static or rotating power supply.
The equipment covered by this Guide is defined by its function rather than design type.  Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied.
This Guide indicates to potential purchasers how their specification should be prepared so that:
- the equipment type and capacity interfaces correctly with other elements of the systems;
- predicted performance is achieved;
- ancillary equipment is properly sized;
- reliability, availability and safety requirements are achieved;
- proper consideration is given to the evaluation process and the quality measures to be applied.
This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser’s project strategy. It does not cover:
- any commercial, contractual or legal issues which are normally in separate parts of an  enquiry;
- any allocation of responsibilities which are determined by the contract.
This Guide does not prescribe the arrangement of the documents in the enquiry.
NOTE: As a comprehensive European environmental policy is still under preparation, this  Guide does not address the environmental implications of the equipment.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-10:2023(Main)
Requirements for generating plants to be connected in parallel with distribution networks - Part 10: Tests for conformity assessment of generating units
EN 50549-10:2022

The purpose of this document is to provide technical guidance for tests on generating units and interface protection to evaluate their electrical characteristics.
NOTE 1    Mechanical issues are taken into account as far as they influence the electrical characteristics.
The evaluation results are intended to be used to demonstrate conformity of generating units to technical requirements for grid connection. In this context the evaluation results can also be used as part of a certification programme.
NOTE 2    Besides the type test results of the generating unit all additional elements for connection to the grid (e.g. transformer, cabling, multiple units) are considered in the evaluation of the final installation of a generating plant.
The requirements to be evaluated are covered in the following standardization documents:
–   EN 50549 1:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 1: connection to a LV distribution network - Generating plants up to and including Type B
–   EN 50549 2:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B
If grid connection requirements are dealt with in other documents or for other generating module types, where no specific testing procedure is provided, testing methods of this document can be used if applicable.
This document provides evaluation criteria for the conformity assessment of generating units with respect to the above mentioned standardization documents, based on type testing. However, some requirements are applicable on the generating plant level. The assessment of the conformity to these plant requirements are out of the scope of this document. Nevertheless, this document may be used to show the capabilities of a generating unit to be used in a plant.
As a consequence, it is possible that the conformity assessment of a generating unit does not cover all aspects of the above-mentioned standardization documents, typically when a requirement is evaluated on a plant level. Therefore, the conformity assessment report indicates clearly which clauses of this document are covered and which clauses are not covered.
This document recognizes the existence of specific technical test requirements within several member states that must be complied with.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60034-33:2022(Main)
Rotating electrical machines - Part 33: Synchronous hydrogenerators including motor-generators - Specific requirements (IEC 60034-33:2022)
EN IEC 60034-33:2022

This part of IEC 60034 applies to three-phase salient-pole synchronous generators and synchronous motor-generators for hydraulic turbine and pump-turbine applications, that have rated frequency of 50 Hz or 60 Hz, rated output of 10 MVA and above, pole pair number 3 and above, and rated voltage of 6 kV and above.
This document supplements basic requirements for rotating machines given in IEC 60034-1.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60034-3:2020(Main)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators (IEC 60034-3:2020)
EN IEC 60034-3:2020

This part of IEC 60034 applies to large three-phase synchronous generators, having rated
outputs of 10 MVA and above driven by steam turbines or combustion gas turbines. Also
included are synchronous Mvar compensators of the same output range connected to a grid for
the purpose of exchanging reactive power.
This document supplements basic requirements for rotating machines given in IEC 60034-1.
Common requirements are specified together with specific requirements for air, hydrogen or
liquid cooled synchronous generators or compensators.
This document also gives the precautions to be taken when using hydrogen cooled generators
including:
• rotating exciters driven by synchronous generators;
• auxiliary equipment needed for operating the generators;
• parts of the building where hydrogen might accumulate.
These requirements also apply to a synchronous generator driven by both a steam turbine and
a combustion gas turbine as part of a single shaft combined cycle unit.
These requirements do not apply to synchronous generators driven by water (hydraulic)
turbines or wind turbines.
NOTE The precautions taken when using hydrogen are valid for all cases where hydrogen is used as a coolant.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-1:2019/AC:2019(Corrigendum)
Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network - Generating plants up to and including Type B
EN 50549-1:2019/AC:2019-04

These standards provide technical requirements for the connection of generating plants up to and including Type A (-1-1)/ Type B (-1-2) which can be operated in parallel with a public LV distribution network. They are intended to be used as a technical reference for connection agreements between DNOs and electricity producers and to demonstrate compliance with COMMISSION REGULATION (EU) 2016/631 (Requirements for Generators).

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum – translation
    2 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-2:2019/AC:2019(Corrigendum)
Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B
EN 50549-2:2019/AC:2019-03

2019-09-17: No XML available because of the template of CLC corrigendum

  • Corrigendum
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-2:2019(Main)
Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B
EN 50549-2:2019

This standard provides technical requirements for the connection of generating plants up to and including Type B which can be operated in parallel with a public MV distribution network. They are intended to be used as a technical reference for connection agreements between DSOs and electricity producers and to demonstrate compliance with COMMISSION REGULATION (EU) 2016/631 (Requirements for Generators).

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-1:2019(Main)
Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network - Generating plants up to and including Type B
EN 50549-1:2019

These standards provide technical requirements for the connection of generating plants up to and including Type A (-1-1)/ Type B (-1-2) which can be operated in parallel with a public LV distribution network. They are intended to be used as a technical reference for connection agreements between DNOs and electricity producers and to demonstrate compliance with COMMISSION REGULATION (EU) 2016/631 (Requirements for Generators).

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    74 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day