SIST EN 50288-4-2:2004

Multi-element metallic cables used in analogue and digital communication and control -- Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung -- Teil 4-2: Rahmenspezifikation für geschirmte Kabel bis 600 MHz - Geräteanschlußkabel und Schaltkabel

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques -- Partie 4-2: Spécification intermédiaire pour les câbles blindés pour applications jusqu'à 600 MHz - Câbles de zone de travail et de brassage

Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2004
• Withdrawal Date: 02-Mar-2016
• ICS: 33.120.20 - Wires and symmetrical cables
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Mar-2016
• Due Date: 24-Mar-2016
• Completion Date: 03-Mar-2016
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: EN 50288-4-2:2003 - Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables

Relations

• Revised: SIST EN 50288-4-2:2013 - Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
• Effective Date: 06-May-2014
• Replaced By: SIST EN 50288-4-2:2013 - Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 50288-4-2:2013 - Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables
• Effective Date: 07-Jun-2022
• Replaces: SIST EN 50288-4-2:2002 - Multi-element metallic cables used in analogue and digital communication and control -- Part 4-2: Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables
• Effective Date: 06-May-2014
• Replaces: SIST EN 50288-4-2:2002 - Multi-element metallic cables used in analogue and digital communication and control -- Part 4-2: Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SIST EN 50288-4-2:2004SLOVENSKIapril 2004
STANDARDMulti-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 50288-4-2:2004(en)ICS33.120.20







EUROPEAN STANDARD
EN 50288-4-2 NORME EUROPÉENNE EUROPÄISCHE NORM
December 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50288-4-2:2003 E
ICS 33.120.20 Supersedes EN 50288-4-2:2001
English version
Multi-element metallic cables used in analogue
and digital communication and control Part 4-2: Sectional specification for screened cables
characterised up to 600 MHz -
Work area and patch cord cables
Câbles métalliques à éléments multiples utilisés pour les transmissions
et les commandes analogiques
et numériques Partie 4-2: Spécification intermédiaire pour les câbles blindés
pour applications jusqu'à 600 MHz - Câbles de zone de travail et de brassage
Mehradrige metallische Daten-
und Kontrollkabel für analoge
und digitale Übertragung Teil 4-2: Rahmenspezifikation
für geschirmte Kabel bis 600 MHz - Geräteanschlußkabel und Schaltkabel
This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 50288-4-2:2003 – 2 –
Foreword This European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data communication cables, of Technical Committee CENELEC TC 46X, Communication cables. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50288-4-2 on 2003-10-01. This European Standard supersedes EN 50288-4-2:2001 The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-10-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
This Part 4-2 is to be read in conjunction to EN 50288-1. _________



– 3 – EN 50288-4-2:2003 Contents Page 1 Scope.4 2 Normative references.4 3 Definitions.4 4 Cable construction.4 4.1 Conductor.4 4.2 Insulation.5 4.3 Cabling elements.5 4.4 Identification of cabling elements.5 4.5 Screening of cabling elements.5 4.6 Cable make-up.5 4.7 Filling compound.5 4.8 Interstitial fillers.5 4.9 Screening of the cable core.5 4.10 Moisture barriers.5 4.11 Wrapping layers.5 4.12 Sheath.5 5 Tests and requirements for completed cables.6 5.1 Electrical tests.6 5.2 Mechanical tests.8 5.3 Environmental tests.9 5.4 Fire performance tests.9



EN 50288-4-2:2003 – 4 –
1 Scope This sectional specification covers screened cables, characterised up to 600 MHz, to be used as work area cables to connect a telecommunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling systems.
The electrical, mechanical, transmission and environmental performance characteristics of the screened cables, related to their reference test methods, are detailed. This sectional specification is to be read in conjunction with EN 50288-1 which contains the essential provisions for its application. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the cited publications are listed hereafter. For dated references, subsequent amendments to or revisions of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the cited publication applies, together with any amendments. EN 50173
Information technology - Generic cabling systems EN 50288-1
Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification EN 50289 Series Communication cables - Specifications for test methods EN 50290 Series Communication cables IEC 60189-2
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations 3 Definitions For the purposes of this European Standard the definitions of EN 50288-1 apply. 4 Cable construction 4.1 Conductor The conductor shall be solid or stranded copper and meet the require
...