SIST EN ISO 105-G03:1999

Textiles - Tests for colour fastness - Part G03: Colour fastness to ozone in the atmosphere (ISO 105-G03:1993)

This part of EN 20105 specifies a method for determination of the resistance of all kinds of textiles to the action of ozone in the atmosphere.

Textilien - Farbechtheitsprüfungen - Teil G03: Bestimmung der Farbechtheit gegen Ozon in der Atmosphäre (ISO 105-G03:1993)

Textiles - Essais de solidité des teintures - Partie G03: Solidité des teintures a l'ozone dans l'atmosphere (ISO 105-G03:1993)

La présente partie de l'ISO 105 prescrit une méthode pour la détermination de la résistance des teintures sur les textiles de toute nature, à l'action de l'ozone dans l'atmosphère à la fois à des températures ambiantes et humidités relatives ne dépassant pas 65 % et à des températures élevées et humidités relatives supérieures à 80 %.  
NOTE 1 Si un échantillon présente une sensibilité au présent essai, il convient de le soumettre également aux essais prescrits dans l'ISO 105-G01 (solidité des teintures aux oxydes d'azote) et l'ISO 105-G02 (solidité des teintures aux fumées de gaz brûlés) vis-à-vis de sa sensibilité.

Tekstilije - Preskušanje barvne obstojnosti - Del G03: Barvna obstojnost proti zračnemu ozonu (ISO 105-G03:1993)

General Information

• Status: Published
• Publication Date: 28-Feb-1999
• ICS: 59.080.01 - Textiles in general
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-1999
• Due Date: 01-Mar-1999
• Completion Date: 01-Mar-1999
• Ref Project: EN ISO 105-G03:1997 - Textiles - Tests for colour fastness - Part G03: Colour fastness to ozone in the atmosphere (ISO 105-G03:1993)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 105-G03:1999
01-marec-1999
7HNVWLOLMH3UHVNXãDQMHEDUYQHREVWRMQRVWL'HO*%DUYQDREVWRMQRVWSURWL
]UDþQHPXR]RQX,62*
Textiles - Tests for colour fastness - Part G03: Colour fastness to ozone in the
atmosphere (ISO 105-G03:1993)
Textilien - Farbechtheitsprüfungen - Teil G03: Bestimmung der Farbechtheit gegen Ozon
in der Atmosphäre (ISO 105-G03:1993)
Textiles - Essais de solidité des teintures - Partie G03: Solidité des teintures a l'ozone
dans l'atmosphere (ISO 105-G03:1993)
Ta slovenski standard je istoveten z: EN ISO 105-G03:1997
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 105-G03:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 105-G03:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 105-G03:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 105-G03:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 105-G03:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 105-G03:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 105-G03:1999
INTERNATIONAL
STANDARD
105-G03
Second edition
1993-10-01
Textiles - Tests for colour fastness -
Part G03:
Colour fastness to ozone in the atmosphere
Textiles - Essais de solidit6 des teintures -
Partie G03: Soliditk des teintures 2 I’ozone dans I’a tmosphere
Reference number
ISO 105~G03:1993(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 105-G03:1999
ISO 105-G03:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 105-G03 was prepared by Technical Committee
lSO/TC 38, Textiles, Sub-Committee SC 1, Tests for coloured textiles and
coloran ts.
This second edition cancels and replaces the first edition (included in
ISO 105-G:1978), of which it constitutes a minor revision.
ISO 105 was previously published in thirteen “Parts”, each designated by
a letter (e.g. “Part A”), with publication dates between 1978 and 1985.
Esch part contained a series of “sections”, each designated by the re-
spective part letter and by a two-digit serial number (e.g. “Section AO1 “1.
These sections are now being republished as separate documents, them-
selves designated “Parts” but retaining their earlier alphanumeric desig-
nations. A complete list of these Parts is given in ISO 105-AOl .
Annexes A and B form an integral part of this part of ISO 105. Annex C is
for information only.
0 ISO 1993
All rights reserved. No patt of this publication may be reproduced or utilized in any ferm or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International anization fo r Standa rdization
arg
Case Postale 56 l CH-121 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 105-G03:1999
INTERNATIONAL STANDARD ISO 105-G03:1993(E)
- Tests for colour fastness -
Textiles
Part G03:
Colour fastness to ozone in the atmosphere
ISO 105-F:l985, Textiles - Tests for colour fastness
1 Scope
- Part F: Standard adjacent fabrics.
This part of ISO 105 specifies a method for deter-
mining the resistance of the colour of textiles of all
3 Principle
kinds and in all forms to the action of ozone in the
atmosphere, both at ambient room temperatures with
relative humidities not exceeding 65 % and at ele-
3.1 A specimen and a Swatch of test-control fabric
vated temperatures with relative humidities above
are simultaneously exposed to ozone, in an atmos-
80 %.
phere at ambient room temperature and a relative
humidity not exceeding 65 %, until the test control
NOTE 1 lf a Sample Shows sensitivity to this test, it
Shows a colour Change corresponding to that of a
should also be tested for sensitivity to the tests specified in
Standard of fading. This exposure period constitutes
ISO 105-GOI (colour fastness to nitrogen oxides) and
one cycle. The cycles are repeated until the specimen
ISO 105-G02 (colour fastness to burnt-gas fumes).
Shows a definite colour Change or for a prescribed
number of cycles.
3.2 A specimen and a Swatch of test-control fabric
are simultaneously exposed to ozone in an atmos-
2 Normative references
phere which is maintained at (85 + 5) % relative hu-
midity and a temperature of 40 “C + 5 “C until the
The following Standards contain provisions which,
test control Shows a colour Change corresponding to
through reference in this text, constitute provisions
that of a Standard of fading. The cycle is repeated until
of this part of ISO 105. At the time of publication, the
the specimen Shows a definite colour Change or for
editions indicated were valid. All Standards are subject
a prescribed number of cycles.
to revision, and Parties to agreements based on this
part of ISO 105 are encouraged to investigate the
NOTE 2 The fading of dyes on certain fibres does not
possibility of applying the most recent editions of the
readily take place at humidities below 80 %. The test at high
Standards indicated below. Members of IEC and ISO
humidity is therefore required to produce a colour Change
maintain registers of currently valid International
that predicts Service fading under warm, humid conditions.
Standards.
ISO 105-AO1 :1989, Textiles - Tests for colour fast-
4 Apparatus and materials
ness - Part AO?: General principles of testing.
4.1 Ozone exposure chamber for ambient room
ISO 105-AO2:1993, Textiles - Tests for colour fast-
ness - Part AOZ: Grey scale for assessing Change in temperatures and relative humidities not exceeding
colour. 65 % (see A.l).

---------------------- Page: 9 ----------------------

SIST EN ISO 105-G03:1999
ISO 105-G03:1993(E)
4.2 Ozone exposure chamber for elevated tem- be present in concentrations which produce one cycle
peratures and relative humidities above 80 % (see if fading in 1,5 h to 6 h of test.
clause A.2).
6.1.2 Compare the colour of the control Swatch with
4.3 Test-control fabric for relative humidities not
that of the Standard of fading (4.4) periodically in day-
exceeding 65 % (see annex B).
light ranging from average to slightly bluish North Sky
light, or equivalent artificial light. When they match,
the specimens have been exposed for one cycle and
4.4 Standard of fading for relative humidities not
each shall then be compared with a specimen of the
exceeding 65 % (see annex B).
untreated material.
4.5 Test-control fabric for high humidities (see an-
6.1.3 Remove those specimens which exhibit a col-
nex B).
our Change at the end of one cycle. One cycle will
generally produce a measurable colour Change in
samples which are ozone-sensitive.
4.6 Standard of fading for high humidity (see an-
nex B).
6.1.4 Suspend a fresh Swatch of the test-control
fabric and continue exposure of any remaining speci-
4.7 Grey scale for assessing Change in colour,
mens for a second cycle.
complying with ISO 105-A02.
6.1.5 Run additional similar cycles as necessary.
5 Test specimens
6.1.6 At the end of each cycle, immediately com-
5.1 If the textile to be tested is fabric, use a speci-
pare those specimens which are removed from the
men measuring
...