SIST EN 60974-5:2002
(Main)Arc welding equipment -- Part 5: Wire feeders
Arc welding equipment -- Part 5: Wire feeders
Specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. The wire feeder may be a stand-alone unit which may be connected to a separate welding power source or one where the welding power source and the wire feeder are housed in a single enclosure. The wire feeder may be suitable for manually or mechanically guided torches.
Lichtbogenschweißeinrichtungen -- Teil 5: Drahtvorschubgeräte
Matériel de soudage à l'arc -- Partie 5: Dévidoirs
Spécifie les exigences de sécurité et de performance pour le matériel industriel et professionnel utilisé lors de soudage à l'arc et les techniques connexes pour l'alimentation en fil d'apport. Le dévidoir peut être une unité indépendante pouvant être raccordée à une source de courant de soudage séparée ou une unité intégrant la source de courant de soudage et le dévidoir dans une enveloppe unique. Le dévidoir peut être adapté aux torches guidées manuellement ou mécaniquement.
Arc welding equipment - Part 5: Wire feeders
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60974-5:2002
prva izdaja
STANDARD
september 2002
Arc welding equipment - Part 5: Wire feeders
ICS 25.160.30 Referenčna številka
SIST EN 60974-5:2002(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60974-5
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2002
ICS 25.160.30
English version
Arc welding equipment
Part 5: Wire feeders
(IEC 60974-5:2002)
Matériel de soudage à l'arc Lichtbogenschweißeinrichtungen
Partie 5: Dévidoirs Teil 5: Drahtvorschubgeräte
(CEI 60974-5:2002) (IEC 60974-5:2002)
This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-5:2002 E
---------------------- Page: 2 ----------------------
EN 60974-5:2002 - 2 -
Foreword
The text of document 26/226/FDIS, future edition 1 of IEC 60974-5, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60974-5 on 2002-03-01.
This European
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.