SIST EN ISO 11126-8:1997

Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)

This part of ISO 11126 specifies requirements for olivine sand abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 8: Olivinsand (ISO 11126-8:1993)

Dieser Teil von ISO 11126 legt Anforderungen für Olivinsand fest. Er legt Bereiche für die Korngrösse und Grenzwerte für scheinbare Dichte, Härte, Feuchtegehalt, Leitfähigkeit des wässrigen Eluates (wasserlösliche Verun- reinigungen) und wasserlösliche Chloride fest.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés a la préparation par projection - Partie 8: Sable a l'olivine (ISO 11126-8:1993)

La présente partie de l'ISO 11126 prescrit des exigences relatives aux abrasifs constitués de sable d'olivine, tels qu'ils sont fournis pour la préparation par projection. Elle spécifie les tailles de particules et les valeurs de masse volumique apparente, dureté Mohs, teneur en humidité, conductivité de l'extrait aqueux et teneur en chlorures solubles dans l'eau. Les spécifications prescrites dans la présente partie de l'ISO 11126 s'appliquent seulement aux abrasifs fournis à l'état neuf. Elles ne s'appliquent pas aux abrasifs pendant ou après utilisation. Les méthodes d'essai relatives aux abrasifs non métalliques destinés à la préparation par projection sont indiquées dans les différentes parties de l'ISO 11127.
NOTES 1 L'annexe A donne des informations sur les normes nationales généralement consultables portant sur les abrasifs non métalliques. 2 Quoique la présente partie de l'ISO 11126 ait été spécialement établie pour satisfaire aux exigences de préparation des tôleries, les propriétés prescrites seront généralement appropriées pour l'emploi en préparation de subjectiles ou éléments d'autres matériaux, par les techniques de décapage par projection. Ces techniques sont décrites dans l'ISO 8504-2:1992, Préparation des subjectiles d'acier avant application de peintures et de produits assimilés -- Méthodes de préparation des subjectiles -- Partie 2: Décapage par projection d'abrasif.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Specifikacije za nekovinske granulate za peskanje - 8. del: Olivinski pesek (ISO 11126-8:1993)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 05-Nov-2018
• ICS: 25.220.10 - Surface preparation
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 30-Oct-2018
• Due Date: 22-Nov-2018
• Completion Date: 06-Nov-2018
• Ref Project: EN ISO 11126-8:1997 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)

Relations

• Replaced By: SIST EN ISO 11126-8:2018 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018)
• Effective Date: 01-Dec-2018
• Replaced By: SIST EN ISO 11126-8:2018 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Specifikacije za nekovinske granulate za peskanje - 8. del: Olivinski pesek (ISO 11126-8:1993)Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 8: Olivinsand (ISO 11126-8:1993)Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés a la préparation par projection - Partie 8: Sable a l'olivine (ISO 11126-8:1993)Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)25.220.10Priprava površineSurface preparationICS:Ta slovenski standard je istoveten z:EN ISO 11126-8:1997SIST EN ISO 11126-8:1997en01-december-1997SIST EN ISO 11126-8:1997SLOVENSKI
STANDARD



SIST EN ISO 11126-8:1997



SIST EN ISO 11126-8:1997



SIST EN ISO 11126-8:1997



SIST EN ISO 11126-8:1997



SIST EN ISO 11126-8:1997



INTERNATIONAL STANDARD ISO 11126-8 First edition 1993-12-15 Preparation of steel Substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand Prdparation des subjectiles d’acier avant application de peintures et de produits assimilh - Spkifica tions pour abrasifs non mg talliques destinh a Ia prgparation par projection - Partie 8: Sable a I’olivine Reference number EO 1% %26-8:1993(E) SIST EN ISO 11126-8:1997



ISO 11126=8:1993(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take patt in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 11126-8 was prepared by Technical Committee ISOnC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel Substrates before application of pain ts and related products. ISO 11126 consists of the following Parts, under the general title Prep- aration of steel Substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives: - Part 1: General introduction and classification - Part 2: Silica sand - Part 3: Copper refinety slag - Part 4: Coal furnace slag - Part 5: Nickel refinery slag - Part 6: Iron furnace slag - Part 7: Fused aluminium Oxide - Part 8: Olivine sand - Part 9: Staurolite 0 ISO 1993 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 11126-8:1997



0 ISO ISO 11126-8:1993(E) - Part 70: Garnet At the time of publication of this part of ISO 11126, Parts 2, 7, 9 and 10 were in course of preparation. Annex A of this part sf ISO 1% 126 is for information only. SIST EN ISO 11126-8:1997



This page intentionally left blank SIST EN ISO 11126-8:1997



INTERNATIONAL STANDARD Q ISO ISO 11126-8:1993(E) Preparation of steel Substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand WARNING - Equipment, materials and abrasives used for surface preparation tan be hazardous if used carelessly. Many national regulations exist for those materials and abrasives that are considered to be hazardous during or after use (waste management), such as free silica or carcinogenic or toxic substances. These regulations are therefore to be observed. It is important to ensure that adequate instructions are given and that all required precautions are exercised. 1 Scope This part of ISO 11126 specifies requirements for olivine sand abrasives, as supplied for blast-cleaning processes. lt specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water- soluble chlorides. The requirements specified in this patt of ISO 11126 apply to abrasives supplied in the “ne,” condition only. They do not apply to abrasives either during or after use. Test methods for non-metallic blast-cleaning abrasives are given in the various Parts of ISO 11127. NOTES 1 Information on commonly referenced national Standards for non-metallic abrasives is given in annex A. 2 Although this part of ISO 11126 has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appro- priate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These tech- niques are described in ISO 8504-2:1992, Prepac&ion of steel Substrates before application of paints and related products - Surface preparation methods - Part 2: Abras- ive blas t-cleaning. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 11126. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this patt of ISO 11126 are encouraged to investi- gate the possibility of applying the most r
...