SIST ISO 2170:1997

Cereals and pulses -- Sampling of milled products

Céréales et légumineuses -- Échantillonnage des produits de mouture

Žito in stročnice - Vzorčenje mlevskih proizvodov

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-1997
• Withdrawal Date: 31-May-2000
• ICS: 67.060 - Cereals, pulses and derived products
• Technical Committee: KŽP - Agricultural food products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jun-2000
• Due Date: 01-Jun-2000
• Completion Date: 01-Jun-2000
• Ref Project: ISO 2170:1980 - Cereals and pulses — Sampling of milled products

Relations

• Revised: ISO 13690:1999 - Cereals, pulses and milled products — Sampling of static batches
• Effective Date: 12-May-2008
• Replaced By: SIST ISO 13690:2000 - Cereals, pulses and milled products -- Sampling of static batches
• Effective Date: 01-Jun-2000

Standards Content (Sample)

International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEIKJIYHAPOAHAR OPrAHM3ALMR fl0 CTAH~APTM3ALWl.ORGANISATlON INTERNATIONALE DE NORMALISATION
Cereals and pulses -
Sampling of milled products
C&&ales et lkgumineuses - ichan tilionnage des produits de mou ture
Second edition - 1980-02-15
UDC 633.V.3 : 664.7 : 620.113
Ref. No. ISO 2170-1980 (E)
w
-
8 Descriptors : agricultural products, cereal products, pulses (grains), sampling, quality control, sampling equipment, bulk products,
transportation,
labelling, sampling tables.
5 ’
Price based on 8 pages

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bodies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as international Standards by
the ISO Council.
International Standard ISO 2170 was developed by Technical Committee ISO/TC 34,
Agricultural food products.
This second edition was submitted directly to the ISO Council, in accordance with
clause 5.10.1 of part 1 of the Directives for the technical work of ISO. lt cancels and
replaces the first edition (i.e. ISO 2170-1972), which had been approved by the
member bodies of the following countries :
Australia India Portugal
Austria Iran Romania
Canada Ireland South Africa, Rep. of
Chile
Israel Spain
Czec hoslova kia Korea, Dem. P. Rep. of Sri Lanka
Turkey
Egypt, Arab Rep. of Korea, Rep. of
France Netherlands United Kingdom
Germany, F. R. New Zealand USSR
Hungary Poland
No member body had expressed disapproval of the document.
Th is International S Itandard has been prepared taking into account Standard No. 101
of the International Associa tion of Cereal Chemistry (ICC).
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD
ISO 21704980 (EI
Cereals and pulses - Sampling of milled products
0 Introduction 2 Definitions
Correct sampling is an Operation that requires most careful
For the purpose of this International Standard, the following
attention. Emphasis cannot therefore be too strongly laid on definitions apply.
the necessity of obtaining a properly representative Sample of
milled cereal or pulse. Careless or inaccurate sampling could 2.1 consignment : The quantity of product dispatched or
lead to misunderstanding and unwarranted financial adjust- received at one time and covered by a particular contract or
ment. shipping document. lt may be composed of one or more lots.
The procedures given in this International Standard are
2.2 lot : A part of a consignment or a consignment with
recognized as good practice and it is strongly recommended
presumed uniform characteristics, to which a given scheme of
that they be followed whenever practicable. lt is recognized
investigation tan be applied.
that it is difficult to lay down fixed rules to be followed in every
case, and particular circumstances may render some modifica-
increment : A small quantity of product taken from a
2.3
tion of the method desirable, for example if it is desired to
Single Position in the lot.
check the uniformity of a consignment by the examination of
individual increments.
A series of increments should be taken from different positions
in the lot such that, when bulked, they will be representative of
In certain areas there are widely recognized trade associations
the lot.
which prescribe rules for the sampling procedures to be used in
contracts under their auspices. In no case will the methods
described in this International Standard override the rules laid
2.4 bulk Sample : The quantity of product formed by com-
down in such contracts, or the rules of official inspecting
bining and mixing the increments taken from a specific lot.
organizations.
2.5 laboratory Sample; final lot Sample : The quantity of
product removed from the bulk Sample and intended for
1 Scope and field of application
analysis or other examination.
This International Standard specifies general conditions
relating to the sampling for assessment of quality and condition
3 General
of milted products from cereals and pulses, intended for human
or animal consumption, in powder, particuiate or agglomerated
3.3 Samples shall be taken jointly by sampling
form.
superintendents appointed by buyers and Sellers, or by a sampl-
ing superintendent appointed jointly.
lt does not apply to whole unprocessed cereal grains or pulses,
to seed grains or pulses, or to partially milled cereals or pulses
which retain the form of the original material’). Starches and 3.2 Samples shall be fully representative of the lots from
oils obtained from cereals or pulses are also excluded from the which they are taken. Therefore, as the composition of the lot
scope of this International Standard. is seldom uniform, a sufficient number of increments shall be
1) For the sampling of cereals as grain, see ISO 950, Cereals - Samphg (asgrain). This method is also suitable for the partially milled cereals men-
tioned. For the sampling of whole pulses, see ISO 951, Pulses ln bags - Sampling. Examples of products which present difficulties in classification
are given in annex B.
1

---------------------- Page: 3 ----------------------
ISO 2170-1980 (EI
taken and carefuily mixed, thus giving a bulk Sample from 5.2 Discharge
which are obtained, by successive divisions, the laboratory
When milled products are received from ocean-going vessels or
samples. If the lot consists of a number sf freight Containers,
samples shall be taken from each freight Container. river transport, sampling shall be carried out during discharge
from the vessel.
3.3 lt is essential that a product which is sea-damaged or
5.3 Sampling from freight Containers, tank cars
otherwise damaged in transit or out of condition is kept
separate from the Sound product and sampled separately. or tank trucks
Samples of the Unsound material shall not be mixed with
samples of the Sound material. The sampling of products from freight Containers, tank cars or
tank trucks shall be carried out at the place of original loading
or of final unloading.
is necessary to ensure that all sampling
3.4 Special care
dry and free f rom foreign odours.
apparatus is clean,
Sampling shall be carried out in such a manner as to protect the
6 Taking of increments
samples, the sampling instruments and the Containers in which
the samples are placed from adventitious contamination such
6.1 Increments from products carried in bulk
as rain, dust, etc.
4 Apparatus 6.1.1 Carriage by sea or inland waterway
is required as follows (see figures 1 to 9 for ex- 6.1.1.1 Unless otherwise specified in the contract, con-
Apparatus
amples). signments shall be considered in lots of 500 tonnesl) or such
part thereof as constitutes a Single consignment or balance.
NOTE - Many different types and variations of apparatus are
available. The dimensions given in the figures are included, therefore, If the consignment is carried in a numbe r of barges, each barge
solely as a guide.
load shall constitute a lot.
4.1 Sampling from bulk
6.1.1.2 When sampling takes place while the product is in
motion, increments shall be taken at time intervals dependent
rical Samplers and apparatus for
S hovels, hand-scoops, cylind
on the rate of flow.
from a flow of milled produc t.
taking increments periodically
6.1.1.3 When a bulk product is sampled in the hold during
4.2 Sampling from bags
loading or discharge, increments shall be taken from as many
places as possible, excluding the run, and at intervals determin-
Sack-type spears or triers.
ed by the rate sf loading or discharge.
4.3 Mixing and dividing 6.1.1.4 If sampling takes place from weigh hoppers before
weighing, increments shall be taken by means of cylindrical
Shovels and dividing apparatus.
Samplers, shovels, or mechanical Samplers in accordance with
the practice of the port.
5 Location of sampling
6.1.4.5 The procedure for Silos or warehouses is necessarily
dependent on local conditions.
The location and time of sampling shall be determined by
agreement between the Parties concerned. Particular re-
6.1.2 Carriage by rail or road
quirements applying to loading and discharge are given below.
6.1.2.1 Unless otherwise specifi ed in the contract, each laden
5.1 Losding
or Iorry shall be sampled.
wagon
lt is important that milled products which are to be dispatched
pling wagons or lorries,
6.1.2.2 If sam takes place from laden
by vessel are sampled during loading, or immediately before, at
the increments shall be taken throughout t he whole depth of
the place of loading.
1 t = 1 OOOkg.
1) Metric tonnes.
2

---------------------- Page: 4 ----------------------
ISO 2170-1980 (EI
6.2.2 Carriage in pre-packed units
the product by means of a cylindrical Sampler inserted vertically
at the following Points :
Pre-packed units are usually transported in outer cases or car-
tons containing a convenient number of units.
Wagons or lorries up to 15 t :
. .
Five sampling Points (middle
. The procedure applicable to bags, described in 6.2.1, shall be
s .
u and approximately 500 mm
used for determining the appropriate number of outer cases or
f rom sides)
cartons to be sampled. If the total number of outer cases or car-
tons in the consignments does not exceed 1 000, only one pre-
packed unit shall be taken from each of the outer cases or car-
Wagons from 15 to 30 t :
tons taken for sampling.
Eight sampling Points
Care shall be taken to ensure that a pre-packed unit is taken in a
random manner from the entire contents of the outer case or
carton taken for sampling. The selection of pre-packed units
occupying the same corresponding Position in a number of
. . Wagons from 30 to 50 t :
. .
. .
. outer cases or cartons shall particularly be avoided.
. .
.
. . ‘
, Eleven sampling Points
.
The pre-packed units taken in this manner shall be c
...

SLOVENSKI STANDARD
SIST ISO 2170:1997
01-maj-1997
äLWRLQVWURþQLFH9]RUþHQMHPOHYVNLKSURL]YRGRY
Cereals and pulses -- Sampling of milled products
Céréales et légumineuses -- Échantillonnage des produits de mouture
Ta slovenski standard je istoveten z: ISO 2170:1980
ICS:
67.060 äLWDVWURþQLFHLQSURL]YRGLL] Cereals, pulses and derived
QMLK products
SIST ISO 2170:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 2170:1997

---------------------- Page: 2 ----------------------

SIST ISO 2170:1997
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEIKJIYHAPOAHAR OPrAHM3ALMR fl0 CTAH~APTM3ALWl.ORGANISATlON INTERNATIONALE DE NORMALISATION
Cereals and pulses -
Sampling of milled products
C&&ales et lkgumineuses - ichan tilionnage des produits de mou ture
Second edition - 1980-02-15
UDC 633.V.3 : 664.7 : 620.113
Ref. No. ISO 2170-1980 (E)
w
-
8 Descriptors : agricultural products, cereal products, pulses (grains), sampling, quality control, sampling equipment, bulk products,
transportation,
labelling, sampling tables.
5 ’
Price based on 8 pages

---------------------- Page: 3 ----------------------

SIST ISO 2170:1997
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bodies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as international Standards by
the ISO Council.
International Standard ISO 2170 was developed by Technical Committee ISO/TC 34,
Agricultural food products.
This second edition was submitted directly to the ISO Council, in accordance with
clause 5.10.1 of part 1 of the Directives for the technical work of ISO. lt cancels and
replaces the first edition (i.e. ISO 2170-1972), which had been approved by the
member bodies of the following countries :
Australia India Portugal
Austria Iran Romania
Canada Ireland South Africa, Rep. of
Chile
Israel Spain
Czec hoslova kia Korea, Dem. P. Rep. of Sri Lanka
Turkey
Egypt, Arab Rep. of Korea, Rep. of
France Netherlands United Kingdom
Germany, F. R. New Zealand USSR
Hungary Poland
No member body had expressed disapproval of the document.
Th is International S Itandard has been prepared taking into account Standard No. 101
of the International Associa tion of Cereal Chemistry (ICC).
0 International Organkation for Standardkation, 1980
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 2170:1997
INTERNATIONAL STANDARD
ISO 21704980 (EI
Cereals and pulses - Sampling of milled products
0 Introduction 2 Definitions
Correct sampling is an Operation that requires most careful
For the purpose of this International Standard, the following
attention. Emphasis cannot therefore be too strongly laid on definitions apply.
the necessity of obtaining a properly representative Sample of
milled cereal or pulse. Careless or inaccurate sampling could 2.1 consignment : The quantity of product dispatched or
lead to misunderstanding and unwarranted financial adjust- received at one time and covered by a particular contract or
ment. shipping document. lt may be composed of one or more lots.
The procedures given in this International Standard are
2.2 lot : A part of a consignment or a consignment with
recognized as good practice and it is strongly recommended
presumed uniform characteristics, to which a given scheme of
that they be followed whenever practicable. lt is recognized
investigation tan be applied.
that it is difficult to lay down fixed rules to be followed in every
case, and particular circumstances may render some modifica-
increment : A small quantity of product taken from a
2.3
tion of the method desirable, for example if it is desired to
Single Position in the lot.
check the uniformity of a consignment by the examination of
individual increments.
A series of increments should be taken from different positions
in the lot such that, when bulked, they will be representative of
In certain areas there are widely recognized trade associations
the lot.
which prescribe rules for the sampling procedures to be used in
contracts under their auspices. In no case will the methods
described in this International Standard override the rules laid
2.4 bulk Sample : The quantity of product formed by com-
down in such contracts, or the rules of official inspecting
bining and mixing the increments taken from a specific lot.
organizations.
2.5 laboratory Sample; final lot Sample : The quantity of
product removed from the bulk Sample and intended for
1 Scope and field of application
analysis or other examination.
This International Standard specifies general conditions
relating to the sampling for assessment of quality and condition
3 General
of milted products from cereals and pulses, intended for human
or animal consumption, in powder, particuiate or agglomerated
3.3 Samples shall be taken jointly by sampling
form.
superintendents appointed by buyers and Sellers, or by a sampl-
ing superintendent appointed jointly.
lt does not apply to whole unprocessed cereal grains or pulses,
to seed grains or pulses, or to partially milled cereals or pulses
which retain the form of the original material’). Starches and 3.2 Samples shall be fully representative of the lots from
oils obtained from cereals or pulses are also excluded from the which they are taken. Therefore, as the composition of the lot
scope of this International Standard. is seldom uniform, a sufficient number of increments shall be
1) For the sampling of cereals as grain, see ISO 950, Cereals - Samphg (asgrain). This method is also suitable for the partially milled cereals men-
tioned. For the sampling of whole pulses, see ISO 951, Pulses ln bags - Sampling. Examples of products which present difficulties in classification
are given in annex B.
1

---------------------- Page: 5 ----------------------

SIST ISO 2170:1997
ISO 2170-1980 (EI
taken and carefuily mixed, thus giving a bulk Sample from 5.2 Discharge
which are obtained, by successive divisions, the laboratory
When milled products are received from ocean-going vessels or
samples. If the lot consists of a number sf freight Containers,
samples shall be taken from each freight Container. river transport, sampling shall be carried out during discharge
from the vessel.
3.3 lt is essential that a product which is sea-damaged or
5.3 Sampling from freight Containers, tank cars
otherwise damaged in transit or out of condition is kept
separate from the Sound product and sampled separately. or tank trucks
Samples of the Unsound material shall not be mixed with
samples of the Sound material. The sampling of products from freight Containers, tank cars or
tank trucks shall be carried out at the place of original loading
or of final unloading.
is necessary to ensure that all sampling
3.4 Special care
dry and free f rom foreign odours.
apparatus is clean,
Sampling shall be carried out in such a manner as to protect the
6 Taking of increments
samples, the sampling instruments and the Containers in which
the samples are placed from adventitious contamination such
6.1 Increments from products carried in bulk
as rain, dust, etc.
4 Apparatus 6.1.1 Carriage by sea or inland waterway
is required as follows (see figures 1 to 9 for ex- 6.1.1.1 Unless otherwise specified in the contract, con-
Apparatus
amples). signments shall be considered in lots of 500 tonnesl) or such
part thereof as constitutes a Single consignment or balance.
NOTE - Many different types and variations of apparatus are
available. The dimensions given in the figures are included, therefore, If the consignment is carried in a numbe r of barges, each barge
solely as a guide.
load shall constitute a lot.
4.1 Sampling from bulk
6.1.1.2 When sampling takes place while the product is in
motion, increments shall be taken at time intervals dependent
rical Samplers and apparatus for
S hovels, hand-scoops, cylind
on the rate of flow.
from a flow of milled produc t.
taking increments periodically
6.1.1.3 When a bulk product is sampled in the hold during
4.2 Sampling from bags
loading or discharge, increments shall be taken from as many
places as possible, excluding the run, and at intervals determin-
Sack-type spears or triers.
ed by the rate sf loading or discharge.
4.3 Mixing and dividing 6.1.1.4 If sampling takes place from weigh hoppers before
weighing, increments shall be taken by means of cylindrical
Shovels and dividing apparatus.
Samplers, shovels, or mechanical Samplers in accordance with
the practice of the port.
5 Location of sampling
6.1.4.5 The procedure for Silos or warehouses is necessarily
dependent on local conditions.
The location and time of sampling shall be determined by
agreement between the Parties concerned. Particular re-
6.1.2 Carriage by rail or road
quirements applying to loading and discharge are given below.
6.1.2.1 Unless otherwise specifi ed in the contract, each laden
5.1 Losding
or Iorry shall be sampled.
wagon
lt is important that milled products which are to be dispatched
pling wagons or lorries,
6.1.2.2 If sam takes place from laden
by vessel are sampled during loading, or immediately before, at
the increments shall be taken throughout t he whole depth of
the place of loading.
1 t = 1 OOOkg.
1) Metric tonnes.
2

---------------------- Page: 6 ----------------------

SIST ISO 2170:1997
ISO 2170-1980 (EI
6.2.2 Carriage in pre-packed units
the product by means of a cylindrical Sampler inserted vertically
at the following Points :
Pre-packed units are usually transported in outer cases or car-
tons containing a convenient number of units.
Wagons or lorries up to 15 t :
. .
Five sampling Points (middle
. The procedure applicable to bags, described in 6.2.1, shall be
s .
u and approximately 500 mm
used for determining the appropriate number of outer cases or
f rom sides)
cartons to be sampled. If the total number of outer cases or car-
tons in the consignments does not exceed 1 000, only one pre-
packed unit shall be taken from each of the outer cases or car-
Wagons from 15 to 30 t :
tons taken for sampling.
Eight sampling Points
Care shall be taken to ensure that a p
...

^. 'i
Norme internationale @ 2170
~~ ~
INTE RNATIONA? ORGANlLATlON FOR ~TANDARDlZATIONrMEW(RYHAP0~~AR OPrAHM3AUMR no CTAH~APTM3A~MW*ORGANlSAT!ON INTERNATIONALE DE NORMALISATION
Céréales et légumineuses - Échantillonnage des produits
de mouture
Deuxième édition -- 1980-02-15
I<-
- U CDU 633.1/.3: 664.7 : 620.113 Réf. no : IS0 2170-1980 (FI
-
Descripteurs : produit agricole. produit céréalier, Iégumineuçe en grain, échantillonnage, contrôle de qiialite, materiel ci'echaritillonriaqt, prodiiit
z
r.-
en vrac, transport, etiquetage, table d'échantillonnage
O
b
N
Prix base sur 8 pages
E

---------------------- Page: 1 ----------------------
Ava nt- p ro pos
L’ISO iorganisation internationale de norrnalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L‘élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales. en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comites membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de 1‘1S0
La Norme internationale IS0 2170 a été élaborée par le comité technique IS0:TC 34,
Produits agricoles alimentaires
Cette deuxième édition fut soumise directement au Conseil de I‘ISO, conformément au
paragraphe 5.10.1 de la partie 1 des Directives pour les travaux techniques de I’ISO.
Elle annule et remplace la première édition (IS0 2170-1972), qui avait été approuvée par
les comités membres des pays suivants :
Afrique du Sud, Rép. d’ Espagne Pologne
Allemagne, R. F. France Portugal
Hongrie Roumanie
Australie
Autriche Inde Royaume- Uni
Sri Lanka
Canada Iran
Irlande Tchécoslovaquie
Chili
Corée, Rép. dém. p. de Israël Turquie
Nouvelle-Zélande URSS
Corée, Rép. de
Egypte, Rép. arabe d’ Pays-Bas
Aucun comité membre ne l’avait désapprouvée.
La présente Norme internationale a été élaborée compte tenu de la norme no 101 de
l‘Association internationale de chimie céréalière (ICC).
( Organisation internationale de normalisation, 1980 0
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NOM M E I NT'E R N AT1 ON ALE IS0 2170-1980 (FI
Céréales et légumineuses - Échantillonnage des produits
de mouture
O introduction 2 Définitions
DdnS IP cadre de la presente Norrne interriationaie, les defirii
rims ~uivantes sont applicables
2 1 livraison Quaritite de produit expediee ou recue en utit
un contrat particulier ou d'un docu
seule fois dans le cadrp d
nimt de tiansnort Elle peut etre composee d un ou plusipurs
lot5
I ei ,:i iidtiolioie sGI1f 't:Lc>iiiiub boris (laris IC( pr:*cique et I; t:st forte
2,2 lot . Uuantite déterminée piesumée être de caracteristi
rnerit :eiïuriiiiirjri clues uniformes. constituée au sein de la livraison, et perniet
mit etie ~xe~utes II es! adniis qu'qi tiifficiie d'etabiii des
tant d'estirner la aualité de ceile-ci.
regles tixes daidbles i!diis :eus iec as til $:tie des i-irci.~nstaiices
parricuiierss peiiverit re!idir suut-laitaDlt: in triodification de ia
2.3 prélèvement élémentaire Petite qudntite de proticif+
méthode JUI certains points, pdr exemple si I on desire verifier
prelevee en un point du lot
I'hornogeriéite 3 !ille iivraison par l'examen de prklèvemerits
elemeii tail es indi vidueis
Une serie de prelevements elemeritaires doit être effectuee eri
differents points du lot de facon qu unp fois melanges ilci
Dans certaines regioiis, il existe des associations cornmerciales
soient representatifs du lot
largement reconiicies qiii prescrivent des méthodes d'échantil
lonnage a appliqiier dans les contrats passés avec elles. En
aucun cas les methodes decrites dariç la présente Norrne iiiter-
2.4 échantillon global : Quantité de produit obtenue eti
nationdle ne peuvent se substituer aux règles établies par ces
reunissant et en melangeant tous les prélèvements élémentaires
contrats, ou dux reyles d'organismes officiels d'inspection.
effectués dans un lot déterminé
2.5 échantillon pour laboratoire : Quantité de produit pre
1 Objet et domaine d'application
levée dans I'echantillori global et destinee a l'analyse ou a un
autre examen
La présente Norme iriternationale specitie des conditions géné-
rales d'echantillorinage pour ie controie de la qualité et de l'état
des produits de rnoLiture des céréales et des légumineuses, des
3 Généralités
tinés à la consornmatiori huniairie ou animale et préserités sous
forme de poudre, de particules ou d'agglomérats.
3.1 Les échantillons doiverit être prélevés conjointement par
des experts échantiiionneurs désignés par les acheteurs et les
Elle n'est pas applicable aux céreoles ou iegumineuses entières
vendeurs, ou par un expert échantillonneur désigné conjointe-
non transformées, aux semences de cereales ou de Iégumineu-
ment.
ses, ou aux céréales ou légumineuses partiellement moulues et
ayant conservé la forme du produit d'origine''. Les amidons (ou
fécules) et huiles obtenus à partir des céréales ou des Iégunii- 3.2 Les échantillons doivent être entièrement représentatifs
ils sont prélevés Aussi, étant donné que la corn
neuses sont egalenierit exclus dii domaine de la présente des lots d'ou
Norme internationale. position du lot est rarement homogene, II convient d'effectuer
-
Ecliann//o:?/~age ides grairisi Cette inethode est eyalenient opplicahie aux
1) Pour l'échantillonnage des graiils de ieiw!es. voir IS0 950, Céreaies
tcharit,lio/~/?ac/e
produits partiellerneiir nioiiiiis indiques Pour 1'atrhantrllonr:age des leguminetises entières voir IS0 951, Lépri?mei~se.s en sacs
Des exemples de prodiiits qui présentent des difficiiltes pour leur classiticdtinri sont ilorines dails I arinrxr B
1

---------------------- Page: 3 ----------------------
IS0 2170-1980 (FI
un riombre suffisdnt de prelevements elementaires et de les 5.2 Déchargement
rrieidiiqer soigneusement, ce qui donne un echantillon global
d ou sont obtenus pdr reductions successives, les echantillons Lorsque les produits de mouture sont livrés par navires long
SI le lot se Lompose d'un certain nombre de
pour laboratoire courrier ou par transport fluvial, l'échantillonnage doit étre
Conteneurs les echaritillons doivent etre preleves dans chaque effectué pendant le déchargement du bateau.
conteneur
5.3 Échantillonnage dans des conteneurs,
3.3 II est essentiel qu'un produit abîmé par l'eau de mer ou
wagons-citernes ou camions-citernes
par une autre cause pendant le transport, ou qui est en état, soit séparé du produit sain et fasse l'objet d'un échantil-
L'échantillonnage des produits dans les conteneurs, les
Les échantillons du produit abîmé ne doi-
lonnage particulier
wagons-citernes ou les camions citernes doit être effectue ati
vent pas etre mélangés avec ceux du produit sain.
lieu même du premier chargement ou du déchargement final
3.4 Il est nécessaire de s'assurer, avec un soin particulier, que
6 Prélèvements élémentaires
tous les appareils d'échantillonnage sont propres, secs et
exempts d'odeurs étrangères.
Prélèvements élémentaires dans les produits
6.1
L echantillonnage doit etre effectue de facon que les echantil
transportés en vrac
les appareils d'echmtillonnage et les recipients dans les
quels sont places les echantillons soient proteges de toute cor'
6.1.1 Transport par mer ou par voie de navigation inté-
iCimirldtion telle que pluie poussiere etc
rieure
6.1.1.1 Sauf stipulation contraire du contrat, les livraisons
4 Appareillage
doivent être considérées par lots de 500 tli, ou parties de 500 t,
constituant une seule livraison ou le solde.
L appareilldye suivdnt est necessaire (voir exemples aux figures
I a91
Si la livraison est effectuée dans tin certain riombre de peni
ches, chaque chargement de péniche doit constituer un lot
UOTE II existe dP nombreux appareils de types varies Les dirnen
sions iridiquees sur les fiqures sont donc donnees uniquement a titre
indicatif
6.1.1.2 Lorsque I'échantillorinage a lieu pendant que le pro
duit est en mouvement, les prélèvements élémentaires doivent
être effectués à des intervalles déterminés par la vitesse d'écou-
4.1 Echantillonnage dans les produits en vrac
lement.
Grandes pelles, pelles a main, sondes cylindriques et appareils
pour effectuer, par intermittence, les prélèvements élémentai-
6.1.1.3 Lorsque l'échantillonnage du produit en vrac a lieu
res au cours du déversement des produits de mouture.
dans la cale, pendant le chargement ou le déchargement, les
prélèvements élémentaires doivent être effectués en autant
d'endroits qu'il est possible, mais en dehors du flot, et à des
4.2 Échantillonnage dans les sacs
intervalles déterminés par la vitesse de chargement ou de
déchargement.
Sondes effilées spécialement concues pour les sacs
6.1.1.4 Si l'échantillonnage a lieu dans la trémie, avant
4.3 Mélange et réduction
pesage, les prélèvements élémentaires doivent être effectués à
l'aide de sondes cylindriques, de grandes pelles ou d'échantil-
Grandes pelles et appareils à diviser
lonneurs mécaniques, selon la pratique du port.
5 Lieu d'échantillonnage
6.1.1.5 Le mode opératoire à suivre en ce qui concerne les
silos et les entrepôts, dépend nécessairement des conditions
Les types de conventions qui lient les parties déterminent le lieu
locales.
d'échantillonnage et le moment auquel il doit être effectué. Des
exigences particulières s'appliquant au chargement et au
6.1.2 Transport par chemin de fer ou par route
déchargement sont cependant données ci-après.
6.1.2.1 Sauf stipulation contraire du contrat, chaque wagon
5.1 Chargement
ou camion charge doit être échantillonne
II est important que les produits de mouture qui doivent être
6.1.2.2 Si l'échantillonnage a lieu dans des wagons ou
expedies par bateau soient echantillonnes pendant le charge
ment ou immediatement dvant, au lieu même du chargement camions chargés, les prélèvements élémentaires doivent être
-~ ~
11 Tonnes metriques 1 t 1 O00 kq
2

---------------------- Page: 4 ----------------------
IS0 2170-1980 (FI
etfeLtues dans tocite Id hauteur du produit 4 1 aide d'une sonde 6.2.2 Transport en emballages unitaires
vlindrique inrroduite verticalement aux endroits suivants
Les emballages uriitaires sont ordinairement transportes dans
Wagons ou camions conte
des caisses ou des cartons contenant un nombre approprié de
nant jusqu'a 15 t
ces emballages unitaires.
Cinq points de prelevement
La méthode applicable aux sacs, décrite en 6.2.1, doit être utili-
(au centre et à environ
sée pour déterminer le nombre de caisses ou de cartons à
500 mm des parois)
échantillonner. Si le nombre total de caisses ou de cartons dans
la livraison ne dépasse pas 1 000, prélever un seul emballage
Wagons de 15 à 30 t : unitaire dans chaque caisse ou carton à échantillonner.
Huit points de prélèvement S'assurer avec soin que l'emballage unitaire est prélevé au
hasard à partir de la totalité du contenu des caisses ou des car
tons à échantillonner. Le choix d'em
...