SIST EN 61753-087-6:2012

Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment (IEC 61753-087-6:2012)

IEC 61753-087-6:2012(E) contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed 1 310 nm upstream and 1 490 nm downstream wide wavelength division multiplexing (WWDM) passive optical network (PON) device must satisfy in order to be categorized as meeting the requirements of category O (uncontrolled environments), as defined in Annex A of IEC 61753-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 087-6: Nicht mit Steckverbindern versehene bidirektionale 1310-nm-upstream- und 1490-nm-downstream-Einmoden-WWDM-Bauteile für die Kategorie O - Unkontrollierte Umgebung (IEC 61753-087-6:2012)

Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 087-6 : Dispositifs WWDM unimodaux non connectorisés bidirectionnels 1 310 nm en voie montante et 1 490 nm en voie descendante pour la catégorie O - Environnement non contrôlé (CEI 61753-087-6:2012)

IEC 61753-087-6:2012 contient les sévérités et les exigences minimales initiales de qualité de fonctionnement, d'essai et de mesure auxquelles doit satisfaire un dispositif de réseau optique passif (PON – Passice optical network) à répartition en longueur d'onde large (WWDM – wide wavelength division multiplexing) 1 310 nm en voie montante et 1 490 nm en voie descendante muni de fibres amorces afin d’être d'être classé comme conforme aux exigences de la Catégorie O (environnements non contrôlés), comme défini à l’Annexe A de l’IEC 61753-1. L’Annexe B de la présente norme fournit des informations concernant le fonctionnement des voies WWDM montantes à 1 310 nm et descendantes à 1 490 nm.

Optični spojni elementi in pasivne komponente - Tehnični standard - 087-6. del: Naprave brez konektorjev za širokopasovni valovni multipleks (WWDM) za enorodni dvosmerni 1310 nm navzgornji in 1490 nm navzdolnji prenos za kategorijo O - Nenadzorovano okolje (IEC 61753-087-6:2012)

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za delovanje, preskuse in meritve, ki jih mora naprava pasivnega optičnega omrežja za širokopasovni valovni multipleks (WWDM) za 1310 nm navzgornji in 1490 nm navzdolnji prenos izpolnjevati, da izpolnjuje zahteve kategorije O (nenadzorovano okolje), kakor je opredeljeno v dodatku A standarda IEC 61753-1. Dodatek B tega standarda podaja informacije v zvezi z delovanjem širokopasovnega valovnega multipleksa (WWDM) za 1310 nm navzgornji in 1490 nm navzdolnji prenos.

General Information

• Status: Published
• Publication Date: 09-May-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-May-2012
• Due Date: 13-Jul-2012
• Completion Date: 10-May-2012
• Ref Project: EN 61753-087-6:2012 - Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-087-6:2012
01-junij-2012
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
1DSUDYHEUH]NRQHNWRUMHY]DãLURNRSDVRYQLYDORYQLPXOWLSOHNV::'0]D
HQRURGQLGYRVPHUQLQPQDY]JRUQMLLQQPQDY]GROQMLSUHQRV]D
NDWHJRULMR21HQDG]RURYDQRRNROMH,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490
nm downstream WWDM devices for category O - Uncontrolled environment (IEC 61753-
087-6:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
087-6: Nicht mit Steckverbindern versehene bidirektionale 1310-nm-upstream- und 1490
-nm-downstream-Einmoden-WWDM-Bauteile für die Kategorie O - Unkontrollierte
Umgebung (IEC 61753-087-6:2012)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 087-6 : Dispositifs WWDM unimodaux non connectorisés
bidirectionnels 1 310 nm en voie montante et 1 490 nm en voie descendante pour la
catégorie O - Environnement non contrôlé (CEI 61753-087-6:2012)
Ta slovenski standard je istoveten z: EN 61753-087-6:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-087-6:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-087-6:2012

---------------------- Page: 2 ----------------------

SIST EN 61753-087-6:2012

EUROPEAN STANDARD
EN 61753-087-6

NORME EUROPÉENNE
April 2012
EUROPÄISCHE NORM

ICS 33.180.20

English version


Fibre optic interconnecting devices and passive components -
Performance standard -
Part 087-6: Non-connectorised single-mode bidirectional 1310 nm
upstream and 1490 nm downstream WWDM devices for category O -
Uncontrolled environment
(IEC 61753-087-6:2012)

Dispositifs d’interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile -
Partie 087-6 : Dispositifs WWDM Betriebsverhalten -
unimodaux non connectorisés Teil 087-6: Nicht mit Steckverbindern
bidirectionnels 1 310 nm en voie montante versehene bidirektionale 1310-nm-
et 1 490 nm en voie descendante pour la upstream- und 1490-nm-downstream-
catégorie O - Environnement non contrôlé Einmoden-WWDM-Bauteile für die
Kategorie O -
Unkontrollierte Umgebung
(IEC 61753-087-6:2012)


This European Standard was approved by CENELEC on 2012-03-27. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-087-6:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61753-087-6:2012
EN 61753-087-6:2012 - 2 -

Foreword
The text of document 86B/3256/CDV, future edition 1 of IEC 61753-087-6, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC/TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-087-6:2012.

The following dates are fixed:
(dop) 2012-12-27
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-27

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61753-087-6:2012 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61753-087-6:2012
- 3 - EN 61753-087-6:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres


IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)


IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention


IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion


IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock


IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - Optical power handling and
damage threshold characterization


IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)


IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature


IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors


IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices

---------------------- Page: 5 ----------------------

SIST EN 61753-087-6:2012
EN 61753-087-6:2012 - 4 -
Publication Year Title EN/HD Year
IEC 61300-2-48 - Fibre optic interconnecting devices and EN 61300-2-48 -
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling


IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode
fibre optic device


IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss


IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
(mod) passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components


IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and measurements -
Directivity of fibre optic branching devices


IEC 61753-1 - Fibre optic interconnecting devices and EN 61753-1 -
passive components performance standard -
Part 1: General and guidance for performance
standards


IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices -
Part 1: Generic specification

---------------------- Page: 6 ----------------------

SIST EN 61753-087-6:2012



IEC 61753-087-6

®


Edition 1.0 2012-02




INTERNATIONAL



STANDARD



















Fibre optic interconnecting devices and passive components – Performance

standard –

Part 087-6: Non-connectorised single-mode bidirectional 1 310 nm upstream


and 1 490 nm downstream WWDM devices for category O – Uncontrolled

environment























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION

PRICE CODE
N


ICS 33.180.20 ISBN 978-2-88912-934-8



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61753-087-6:2012
– 2 – 61753-087-6  IEC:2012(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report. 6
5 Performance requirements . 6
5.1 Reference components . 6
5.2 Dimensions . 7
5.3 Sample size, sequencing and grouping . 7
5.4 Test Details and Requirements . 7
Annex A (normative) Sample size, sequencing and grouping . 12
Annex B (informative) General information for 1 310 nm upstream and 1 490 nm
downstream PON WWDM device . 13
Bibliography . 14

Figure B.1 – Example for 1490 nm downstream and 1310 nm upstream WWDM at
central office and customer side . 13

Table 1 – Test details and requirements . 7
Table A.1 – Sample size and sequencing of tests . 12

---------------------- Page: 8 ----------------------

SIST EN 61753-087-6:2012
61753-087-6  IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –

Part 087-6: Non-connectorised single-mode
bidirectional 1 310 nm upstream and
1 490 nm downstream WWDM devices for category O –
Uncontrolled environment


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-087-6 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
CDV Report on voting
86B/3256/CDV 86B/3328/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 9 ----------------------

SIST EN 61753-087-6:2012
– 4 – 61753-087-6  IEC:2012(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 61753 series, under the general title Fibre optic interconnecting
devices and passive components – Performance standard, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

NOTICE
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc.
("Telcordia"). All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the
context and use of said material in this IEC document may differ from that of Telcordia.
TELCORDIA MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,
WITH RESPECT TO THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION
OR OPINION CONTAINED HEREIN. ANY USE OF OR RELIANCE UPON SAID
INFORMATION OR OPINION IS AT THE RISK OF THE USER. TELCORDIA SHALL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY INCURRED BY ANY PERSON ARISING OUT OF
THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION OR OPINION
CONTAINED HEREIN.

---------------------- Page: 10 ----------------------

SIST EN 61753-087-6:2012
61753-087-6  IEC:20
...