kSIST FprEN 2467:2024

Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

This document specifies the requirements relating to:
Steel X2CrNi18-9 (1.4307)
Air melted
Softened
Plates, sheets and strips
0,4 mm ≤ a ≤ 200 mm
520 MPa ≤ Rm ≤ 670 MPa
for aerospace applications.
W. nr: 1.4307.
ASD-STAN designation: FE-PA3901.

Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) - Lufterschmolzen - Weichgeglüht - Platten, Bänder und Bleche - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

No Scope available

Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Élaboré à l'air - Adouci - Plaques, tôles et bandes - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

No Scope available

Aeronavtika - Jeklo X2CrNi18-9 (1.4307) - Taljeno na zraku - Popuščano - Plošče, pločevina in trakovi - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Nov-2020
• ICS: 49.025.10 - Steels
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 29-Feb-2024
• Due Date: 18-Apr-2024
• Completion Date: 29-Feb-2024
• Ref Project: FprEN 2467 - Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa

Relations

• Revised: SIST EN 2467:2007 - Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm <= a <= 20 mm - 520 MPa <= Rm <= 670 MPa
• Effective Date: 19-Jan-2023
• Revised: SIST EN 2467:2007 - Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm <= a <= 20 mm - 520 MPa <= Rm <= 670 MPa
• Effective Date: 18-Jan-2023
• Revised: SIST EN 2467:2007 - Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm <= a <= 20 mm - 520 MPa <= Rm <= 670 MPa
• Effective Date: 11-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2467:2020
01-november-2020
Aeronavtika - Jeklo X2CrNi18-9 (1.4307) - Taljeno na zraku - Popuščano - Plošče,
pločevina in trakovi - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets
and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) - Lufterschmolzen - Weichgeglüht -
Platten, Bänder und Bleche - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Élaboré à l'air - Adouci - Plaques, tôles
et bandes - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
Ta slovenski standard je istoveten z: prEN 2467
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 2467:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2467:2020

---------------------- Page: 2 ----------------------
oSIST prEN 2467:2020


DRAFT
EUROPEAN STANDARD
prEN 2467
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2020
ICS 49.025.10 Will supersede EN 2467:2007
English Version

Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted -
Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm -
520 MPa ≤ Rm ≤ 670 MPa
Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) -
Élaboré à l'air - Adouci - Plaques, tôles et bandes - 0,4 Lufterschmolzen - Weichgeglüht - Platten, Bänder und
mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa Bleche - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670
MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2467:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2467:2020
prEN 2467:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 2467:2020
prEN 2467:2020 (E)
European foreword
This document (prEN 2467:2020) has been p
...