SIST EN 558:2008
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
This European Standard specifies the face to face (FTF) and centre to face (CTF) dimensions for PN and Class designated metal valves used in flanged pipe systems.
This standard covers valves with the following PN, Class and DN values:
PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; PN 500
Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500.
NOTE While waiting for revision of EN 1092-1 concerning PN 160, PN 250, PN 320, PN 400 and PN 500, the FTF and CTF dimensions are based on DIN 2548, DIN 2549, DIN 2550, DIN 2551, DIN 2627, DIN 2628, DIN 2629 and DIN 2638.
3 DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 800; DN 900; DN 1 000; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.
For valves in other shell materials than metal the same FTF and CTF dimensions may be used.
Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Nach PN und Class bezeichnete Armaturen
Diese Europäische Norm legt die Baulängen für nach PN und Class bezeichnete Armaturen aus Metall fest,
die in Rohrleitungen mit Flanschen eingesetzt werden.
Diese Norm umfasst Armaturen mit den folgenden PN-, Class- und DN-Werten:
PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; PN 500
Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500.
ANMERKUNG Bis zur Überarbeitung der EN 1092-1 im Hinblick auf PN 160, PN 250, PN 320, PN 400 und PN 500,
basieren die Baulängen auf DIN 2548, DN 2549, DN 2550, DN 2551, DIN 2627, DIN 2628, DIN 2629 und DIN 2638.
-
DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200;
DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 800; DN 900; DN 1 000;
DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.
Für Armaturengehäuse aus anderen Werkstoffen als Metall können die gleichen Baulängen verwendet wer-
den.
Robinetterie industrielle - Dimensions face-a-face et face-a-axe de la robinetterie métallique utilisée dans les systemes de canalisations a brides - Appareils de robinetterie désignés PN et Class
La présente Norme européenne prescrit les dimensions face-a-face (FAF) et face-a-axe (FAA) des appareils
de robinetterie métalliques désignés PN et désignés Class utilisés dans les réseaux de tuyauteries a brides.
La présente Norme européenne couvre les appareils de robinetterie dont les PN, Class, et DN sont les
suivants :
PN 2,5 ; PN 6 ; PN 10 ; PN 16 ; PN 25 ; PN 40 ; PN 63 ; PN 100 ; PN 160 ; PN 250 ; PN 320 ; PN 400 ;
PN 500.
Class 125 ; Class 150 ; Class 250 ; Class 300 ; Class 600 ; Class 900 ; Class 1500 ; Class 2500.
NOTE En raison de l?attente de la révision de l?EN 1092-1 concernant les PN 160 ; PN 250 ; PN 320 ; PN 400 et
PN 500 les dimensions FAF et FAA sont basées sur les normes DIN 2548, DIN 2549, DIN 2550, DIN 2551, DIN 2548,
DIN 2627, DIN 2628, DIN 2629 et DIN 2638.
.DN 10 ; DN 15 ; DN 20 ; DN 25 ; DN 32 ; DN 40 ; DN 50 ; DN 65 ; DN 80 ; DN 100 ; DN 125 ; DN 150 ;
DN 200 ; DN 250 ;DN 300 ; DN 350 ; DN 400 ; DN 450 ; DN 500 ; DN 600 ; DN 700 ; DN 800 ; DN 900 ;
DN 1 000 ; DN 1 200 ; DN 1 400 ; DN 1 600 ; DN 1 800 ; DN 2 000.
Pour les appareils de robinetterie comportant des matériaux d?enveloppe autres que métalliques, les memes
dimensions FAF et FAA peuvent etre utilisées.
Industrijski ventili - Vgradne dolžine kovinskih ventilov za vgradnjo v cevovode s prirobnicami - Ventili, označeni po PN in Class
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 558:2008
01-julij-2008
,QGXVWULMVNLYHQWLOL9JUDGQHGROåLQHNRYLQVNLKYHQWLORY]DYJUDGQMRYFHYRYRGHV
SULUREQLFDPL9HQWLOLR]QDþHQLSR31LQ&ODVV
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in
flanged pipe systems - PN and Class designated valves
Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen
mit Flanschen - Nach PN und Class bezeichnete Armaturen
Robinetterie industrielle - Dimensions face-a-face et face-a-axe de la robinetterie
métallique utilisée dans les systemes de canalisations a brides - Appareils de
robinetterie désignés PN et Class
Ta slovenski standard je istoveten z: EN 558:2008
ICS:
23.060.01 Ventili na splošno Valves in general
SIST EN 558:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 558
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2008
ICS 23.060.10 Supersedes EN 558-1:1995, EN 558-2:1995
English Version
Industrial valves - Face-to-face and centre-to-face dimensions of
metal valves for use in flanged pipe systems - PN and Class
designated valves
Robinetterie industrielle - Dimensions face-à-face et face-à- Industriearmaturen - Baulängen von Armaturen aus Metall
axe de la robinetterie métallique utilisée dans les systèmes zum Einbau in Rohrleitungen mit Flanschen - Nach PN und
de canalisations à brides - Appareils de robinetterie Class bezeichnete Armaturen
désignés PN et Class
This European Standard was approved by CEN on 14 December 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 558:2008: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 558:2008 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Dimensions and tolerances .8
Annex A (informative) Origin of basic series.26
Annex B (informative) Relationship between DN and NPS .28
Bibliography .29
2
---------------------- Page: 3 ----------------------
EN 558:2008 (E)
Foreword
This document (EN 558:2008) has been prepared by Technical Committee CEN/TC 69 “Industrial valves”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2008, and conflicting national standards shall be withdrawn at the
latest by July 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-
lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
This document supersedes EN 558-1:1995 and EN 558-2:1995.
3
---------------------- Page: 4 ----------------------
EN 558:2008 (E)
Introduction
The basic series given in this document are taken from the original series shown in Annex A (informative).
Changes made to the original series will not be automatically incorporated into this document.
The numbers of the existing ISO basic series are maintained as in ISO 5752:1982.
4
---------------------- Page: 5 ----------------------
EN 558:2008 (E)
1 Scope
This European Standard specifies the face-to-face (FTF) and centre-to-face (CTF) dimensions for PN and
Class designated metal valves used in flanged pipe systems.
This standard covers valves with the following PN, Class and DN values:
PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; PN 500
Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500.
DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200;
DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900;
DN 1 000; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.
The face-to-face dimensions of flanged automatic steam traps are specified in EN 26554.
For valves in other shell materials than metal the same FTF and CTF dimensions may be used.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated refer-
ences, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
EN 736-1:1995, Valves - Terminology - Part 1: Definition of types of valves
ISO 5752:1982, Metal valves for use in flanged pipe systems — Face-to-face and centre-to-face dimensions
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions of EN 736-1:1995, and the following
apply.
3.1
face-to-face dimensions (FTF)
(straight pattern valves)
distance, in millimetres, between the two planes perpendicular to the valve axis located at the extremities of the
body end ports or as specified in the relevant valve product standard (see Figures 1 to 3)
3.2
centre-to-face dimensions (CTF)
(angle pattern valves)
distance, in millimetres, between the plane located at the extremity of either body end port and perpendicular to
its axis and the axis of the other body end port (Figures 1 to 3)
5
---------------------- Page: 6 ----------------------
EN 558:2008 (E)
Key a face-to-face (FTF) b centre-to-face (CTF)
Figure 1 — Face to face and centre to face dimensions
Key a face-to-face (FTF) Type A Type B
Figure 2 — Flanged valves PN and Class designated (flat and raised faces)
Type C Type D Type E Type F Type G Type H
Key a face-to-face (FTF)
Figure 3 - Flanged valves PN designated (spigot and recess)
6
---------------------- Page: 7 ----------------------
EN 558:2008 (E)
Dimensions in millimetres
Class 150 and Class 300 Class 600
Large or small male face
Large or small female face
Large or small tongue
Large or small groove
Key
a For dimensions see Table 2 b face-to-face (FTF) c centre-to-face (CTF)
Figure 4 - Flanged valves Class designated
7
---------------------- Page: 8 ----------------------
EN 558:2008 (E)
4 Dimensions and tolerances
4.1 Basic series
The basic series of FTF and CTF dimensions shall be as given in Table 2.
4.2 Face-to-face and centre-to-face dimensions
4.2.1 General
The FTF and CTF dimensions shall be in accordance with Figures 1 to 4.
For each type of valve, the basic series to be taken into consideration are given in Table 4 to Table 14.
NOTE 1 Table 2 gives complete series. In Table 4 to Table 14 the columns of series may be incomplete.
NOTE 2 For certain sizes/types of valves, alternative dimensions are permitted and these are specified in Table 4 to
Table 14 as appropriate.
NOTE 3 The origin of the basic series is shown in Annex A (informative).
For Class designated valves with ring joint flanges, the FTF or CTF dimensions given in Table 2 shall be in-
creased by x as defined in the Table 1.
Key
1 FTF = Dimension of Table 2 + x a face-to-face (FTF)
2 CTF = Dimension of Table 2 + 0,5 x b centre-to-face (CTF)
Figure 5 - FTF and CTF dimensions for Class designated valves with ring joint flanges
8
---------------------- Page: 9 ----------------------
EN 558:2008 (E)
Table 1 — Additional length x for ring joint flanges
Dimensions in millimetres
Nominal
Additional length x for ring joint flanges
size
DN Class 150 Class 300 Class 600
15 11,1 11,1 - 1,6
20
25
12,7 0
32
40
50
65
80
100
125
12,7
150
15,9 3,2
200
250
300
350
400
450
500 19,1 6,4
600 22,2 9,5
700
25,4 12,7
750
800 —
900 28,6 15,9
1 000
4.2.2 For valves having a resilient lining which forms the gasket joint with the mating flanges, the FTF and
CTF dimensions shall be the distance between the extremities of the valve in the installed condition.
If the dimensions for CTF and FTF differ from the standard dimensions, they shall be given by the manufac-
turer.
4.2.3 For valves having a resilient or hard lining, the thickness of the lining on the mating surface shall be
included in the FTF and CTF dimensions given in Table 2, unless the design of the valve precludes such an
inclusion.
If this is the case, the manufacturer shall indicate the deviation from the standardised FTF or CTF dimensions
in his documentation.
9
---------------------- Page: 10 ----------------------
EN 558:2008 (E)
4.2.4 Raised face flanges
For valves:
having flanges with 1,6 mm raised flange:
in grey cast iron, Class 250;
ductile cast iron, Class 150 and 300;
having flanges with 6,4 mm raised flange:
in steel, Class 600.
The FTF and CTF dimensions shall be in accordance with Figure 1 and Figure 6.
Dimensions in millimetres
Key
a face-to-face (FTF) or centre-to-face (CTF), for dimensions see Table 2
Figure 6 - FTF and CTF dimensions for Class designated valves with raised face flanges
10
---------------------- Page: 11 ----------------------
EN 558:2008 (E)
4.3 Tolerances
Tolerances on FTF and CTF dimensions are given in Table 3a. Both Tolerances shall be fulfilled.
End flange seating surfaces shall be parallel or perpendicular. Tolerances “c” on the parallelism or perpen-
dicularity as shown in Figure 7 are given in Table 3b.
Figure 7 - Tolerances on parallelism and perpendicularity
11
---------------------- Page: 12 ----------------------
EN 558:2008 (E)
Table 2 — Dimensions of basic series
Dimensions in millimetres
Basic series
DN DN
a a a a a a
1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25
10 130 210 102 — — 108 90 105 — — 130 — 115 — — 80 — — — 65 70 — — 10
15 130 210 108 140 165 108 90 105 108 57 130 — 115 — — 80 140 — 152 65 70 83 — 15
20 150 230 117 152 190 117 95 115 117 64 130 — 120 — — 90 152 — 178 70 75 95 — 20
25 160 230 127 165 216 127 100 115 127 70 140 — 125 120 — 100 165 — 216 80 85 108 — 25
32 32
180 260 140 178 229 146 105 130 140 76 165 — 130 140 — 110 178 — 229 90 95 114 —
40 40
200 260 165 190 241 159 115 130 165 83 165 106 140 240 33 120 190 33 241 95 100 151 —
50 230 300 178 216 292 190 125 150 203 102 203 108 150 250 43 135 216 43 267 105 115 146 — 50
65 290 340 190 241 330 216 145 170 216 108 222 112 170 270 46 165 241 46 292 115 125 165 — 65
80 310 380 203 283 356 254 155 190 241 121 241 114 180 280 64 185 283 46 318 125 135 178 49 80
100 350 430 229 305 432 305 175 215 292 146 305 127 190 300 64 229 305 52 356 135 146 216 56 100
125 400 500 254 381 508 356 200 250 330 178 356 140 200 325 70 — 381 56 400 — — 254 64 125
150 150
480 550 267 403 559 406 225 275 356 203 394 140 210 350 76 — 403 56 444 — — 279 70
200 600 650 292 419 660 521 275 325 495 248 457 152 230 400 89 — 419 60 533 — — 330 71 200
250 730 775 330 457 787 635 325 390 622 311 533 165 250 450 114 — 457 68 622 — — 394 76 250
300 850 900 356 502 838 749 375 450 698 349 610 178 270 500 114 — 502 78 711 — — 419 83 300
350 980 1 025 381 762 889 — 425 515 787 394 686 190 290 550 127 — 572 78 838 — — — 92 350
400 1 100 1 150 406 838 991 — 475 575 914 457 762 216 310 600 140 — 610 102 864 — — — 102 400
450 450
1 200 1 275 432 914 1 092 — 500 — 978 483 864 222 330 650 152 — 660 114 978 — — — 114
500 500
1 250 1 400 457 991 1 194 — — 700 978 — 914 229 350 700 152 — 711 127 1 016 — — — 127
600 1 450 1 600 508 1 143 1 397 — — — 1 295 — 1 067 267 390 800 178 — 787 154 1 346 — — — 154 600
700 1 650 — 610 — 1 549 — — — 1 448 — — 292 430 900 229 — — 165 1 499 — — — — 700
750 — — 610 1 397 1 651 — — — 1 524 — — — — — — — — 1651901 594 — — — — 750
800 1 850 — 660 — 1 651 — — — 1 676 — — 318 470 1 000 241 — — 190 1 778 — — — — 800
900 2 050 — 711 — 2 083 — — — 1 956 — — 330 510 1 100 241 — — 200 203 2 083 — — — — 900
1 000 1 000
2 250 — 813 — — — — — — — — 410 550 1 200 300 — — 251216 — — — — —
1 200 — — — — — — — — — — — 470 630 — 350 — — 276254 — — — — — 1 200
1 400 — — — — — — — — — — — 530 710 — 390 — — 279 — — — — — 1 400
1 600 — — — — — — — — — — — 600 790 — 440 — — 318 — — — — — 1 600
1 800 — — — — — — — — — — — 670 870 — 490 — — 356 — — — — — 1 800
2 000 — — — — — — — — — — — 760 950 — 540 — — 406 — — — — — 2000
a
CTF dimensions for angle pattern valves.
12
---------------------- Page: 13 ----------------------
EN 558:2008 (E)
Table 2 (continued)
Dimensions in millimetres
Basic series
DN DN
a
a a a
26 27 28 29 30 32 33 36 37 38 39 40 43 45 46 47 48 49 50 51 52 53 54
41 42
10 — 115 130 108 — — — — — — — — — — — — — — — — — — — — 10
—
15 — 115 130 108 150 76 — — — — — — — — 90 140 165 — — 16 — — 25 — — 15
20 — 120 150 117,5 160 89 — 76 — — — — — — 100 152 250 75 — 19 — — 31,5 — 229 20
25 25
— 125 160 127 160 102 — 102 184 197 210 92 98 105 115 210 255 80 — 22 — — 35,5 — 254
32 — 130 180 127 180 108 — — — — — — — — 130 230 265 90 — 28 — — 40 — 279 32
40 240 140 200 136 190 114 152 114 222 235 251 111 117 125 150 240 280 100 180 31,5 — — 45 38 305 40
50 50
250 150 230 142 200 133 178 124 254 267 286 127 133 143 170 250 300 110 200 40 54 54 56 40 368
65 290 170 290 154 215 146 216 — — — — — — — — 270 340 130 240 46 54 60 63 42 419 65
80 310 180 310 160 230 159 254 165 298 317 337 149 159 168 — 280 360 150 260 50 57 67 71 44 381 80
100 100
350 190 350 172 250 178 305 194 352 368 394 176 184 197 — 300 400 160 300 60 64 67 80 46 457
125 400 325 400 186 275 200 381 — — — — — — — — 350 450 200 350 90 70 83 110 48 551 125
150 450 350 450 200 300 222 457 229 451 473 508 225 236 254 — 375 500 210 400 106 76 95 125 50 610 150
200 200
550 400 550 228 350 279 584 243 543 568 610 272 284 305 — 425 600 — 500 140 95 127 160 60 737
250 650 450 650 255 400 311 711 297 673 708 752 337 354 376 — 450 700 — 600 — 108 140 200 65 838 250
300 750 500 750 285 425 356 813 338 737 775 819 368 387 410 — 500 800 — 700 — 143 181 250 75 965 300
350 350
850 550 850 315 475 — 889 — 889 927 972 445 464 486 — 550 — — 800 — 184 222 280 80 1 029
400 950 762 950 340 525 — 991 400 1 016 1 057 1 108 508 529 554 — 600 — — 900 — 191 232 — 95 1 130 400
450 1 050 — — 360 575 — 1 092 457 — — — — — — — — — — 1 000 — 203 264 — 107 1 219 450
500 500
1 150 914 1 150 380 625 — 1 194 508 — — — — — — — — — — 1 100 — 213 292 — 120 1 321
600 1 350 — — 425 725 — 1 397 610 — — — — — — — — — — 1 300 — 222 318 — 144 1 549 600
700 1 550 — — 470 825 — 1 549 — — — — — — — — — — — 1 500 — 321 381 — 160 — 700
750 750
— — — — — — — — — — — — — — — — — — — —
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.