SIST-TP CEN ISO/TR 24014-3:2013
(Main)Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013)
Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013)
This Technical Report describes how to implement Interoperable Fare Management (IFM) Applications in a multi-application environment, and the additional roles and use cases that appear. Multi-application media open new possibilities for separate secure IFM Applications to be loaded and operated separately on the same Media. This enables a customer oriented commercial interoperability with the possibility for the customer to use the same Media in different Fare Management Systems independently of the fare policies and specific local systems and without the need for any common commercial policies.
Öffentlicher Verkehr - Interoperables Fahrgeld Management System - Teil 3: Multi-Applikationsmedien (ISO/TR 24014-3:2013)
Transport public - Système de gestion tarifaire interopérable - Partie 3: Concepts complémentaires à la Partie 1 pour medias multiapplications (ISO/TR 24014-3:2013)
Javni prevoz - Medobratovalni sistem upravljanja voznin - 3. del: Dopolnilni koncepti k 1. delu za večaplikacijske medije (ISO/TR 24014-3:2013)
To tehnično poročilo opisuje, kako izvajati medobratovalne aplikacije upravljanja voznin (IFM) v večaplikacijskem okolju, ter dodatne vloge in primere uporabe, ki se pojavljajo. Večaplikacijski mediji odpirajo nove možnosti za ločeno nalaganje in upravljanje ločenih varnih medobratovalnih aplikacij upravljanja voznin na istem mediju. To omogoča k stranki usmerjeno komercialno medobratovalnost z možnostjo, da stranka uporablja isti medij v različnih sistemih upravljanja voznin neodvisno od politik voznin in posameznih lokalnih sistemov ter brez potrebe po kakršnih koli skupnih komercialnih politikah.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 24014-3:2013
01-junij-2013
-DYQLSUHYR]0HGREUDWRYDOQLVLVWHPXSUDYOMDQMDYR]QLQGHO 'RSROQLOQL
NRQFHSWLNGHOX]DYHþDSOLNDFLMVNHPHGLMH ,6275
Public transport - Interoperable fare management system - Part 3: Complementary
concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013)
Öffentlicher Verkehr - Interoperables Fahrgeld Management System - Teil 3: Multi-
Applikationsmedien (ISO/TR 24014-3:2013)
Transport public - Système de gestion tarifaire interopérable - Partie 3: Concepts
complémentaires à la Partie 1 pour medias multiapplications (ISO/TR 24014-3:2013)
Ta slovenski standard je istoveten z: CEN ISO/TR ISO 24014-3:2013
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TP CEN ISO/TR 24014-3:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
---------------------- Page: 2 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
TECHNICAL REPORT
CEN ISO/TR 24014-3
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
April 2013
ICS 03.220.01; 35.240.60
English Version
Public transport - Interoperable fare management system - Part
3: Complementary concepts to Part 1 for multi-application media
(ISO/TR 24014-3:2013)
Transport public - Système de gestion tarifaire Öffentlicher Verkehr - Interoperables Fahrgeld
interopérable - Partie 3: Concepts complémentaires à la Management System - Teil 3: Multi-Applikationsmedien
Partie 1 pour medias multiapplications (ISO/TR 24014- (ISO/TR 24014-3:2013)
3:2013)
This Technical Report was approved by CEN on 28 January 2013. It has been drawn up by the Technical Committee CEN/TC 278.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 24014-3:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
CEN ISO/TR 24014-3:2013 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
CEN ISO/TR 24014-3:2013 (E)
Foreword
This document (CEN ISO/TR 24014-3:2013) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Road transport and
traffic telematics” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of ISO/TR 24014-3:2013 has been approved by CEN as CEN ISO/TR 24014-3:2013 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
---------------------- Page: 6 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
TECHNICAL ISO/TR
REPORT 24014-3
First edition
2013-04-15
Public transport — Interoperable fare
management system —
Part 3:
Complementary concepts to Part 1 for
multi-application media
Transport public — Système de gestion tarifaire interopérable —
Partie 3: Concepts complémentaires à la Partie 1 pour medias
multiapplications
Reference number
ISO/TR 24014-3:2013(E)
©
ISO 2013
---------------------- Page: 7 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 8 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 4
5 General context and limitations . 4
6 Media functional architecture . 5
6.1 Multi-application . 5
6.2 Functional model of the Media . 5
6.3 Security Domain management . 7
6.4 Composite Customer Media certification and validation . 9
7 Public Transport requirements for multi-application Customer Media .10
7.1 Business requirements .10
7.2 General functional requirements .13
7.3 Secure Element’s profile .13
7.4 Security .14
7.5 Uniqueness .14
8 Insertion of the IFM functional model in the multi-application context .18
8.1 General .18
8.2 Media environment .20
8.3 SE Community .20
8.4 Intermediary Roles .21
8.5 Impact on the roles in the IFM Community.22
8.6 Certification of SE and Application Templates .23
9 Use cases .23
9.1 General .23
9.2 Main sequence diagram .24
9.3 Table of the use cases .25
9.4 Certification of SE .26
9.5 Installation of Application template .26
9.6 Personalisation of pre-installed Application template .27
9.7 Update of Application Template .27
9.8 Termination of application .28
9.9 Termination of SE .28
9.10 Customer service management .28
10 Practices for implementing the use of multi-application .29
10.1 General .29
10.2 Implementation of Roles into Organisations .29
10.3 Legal ownership of the Media and SE .29
10.4 Implementation of the Role of SD manager .29
10.5 Implementation of the Portal function .30
10.6 The EU-IFM Project proposal .31
10.7 Mobile SUICA .32
10.8 France interoperability project .34
10.9 Case of Korea .35
10.10 Comparison with EPC-GSMA white paper .36
Bibliography .39
© ISO 2013 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from
that which is normally published as an International Standard (“state of the art”, for example), it may
decide by a simple majority vote of its participating members to publish a Technical Report. A Technical
Report is entirely informative in nature and does not have to be reviewed until the data it provides are
considered to be no longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 24014-3 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
ISO/TR 24014-3 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems in
collaboration with Technical Committee CEN/TC 278, Road transport and traffic telematics.
This first edition is a partial revision of ISO 24014-1:2007.
ISO 24014 consists of the following parts, under the general title Public transport — Interoperable fare
management system:
1)
— Part 1: Architecture
2)
— Part 2: Business practices [Technical Report]
— Part 3: Complementary concepts to Part 1 for multi-application media [Technical Report]
1) International Standard under development.
2) Technical Report under development.
iv © ISO 2013 – All rights reserved
---------------------- Page: 10 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
Introduction
This Technical Report explains the functions to be identified by Public Transport stakeholders to set
up Interoperable Fare Management. From that functional view, there was no need to distinguish the
implementation as a stand-alone application from the implementation in a multi-application environment.
Since the publication of ISO 24014-1, multi-application contactless devices have become available such
as multi-application smart cards, USB-keys and mobile phones. They are able to host Public Transport
Applications in embedded or additional Secure Elements.
This Technical Report addresses the introduction of multi-application media into the transit ecosystem
from the organizational and functional perspectives with the objective to provide a basis for transit to
leverage its large customer base.
Only the use of standardized processes can put Public Transport in a position to benefit from such a
multi-application environment
— to diminish investment and operational costs with the use of Media issued by a third party,
— to increase the convenience and interoperability for the customer and therefore the ridership, and
— to make the same service available with multiple solution providers without developing specific
middleware.
This Technical Report therefore acknowledges technical requirements that refer to existing ISO and
non-ISO open standards to favour the convergence of transit Fare Management Systems.
Document outline
The technical points to be harmonized for regional implementations that need to find possibilities of
commercial interoperability are described:
— Common model of the multi functional architecture of the media (Clause 6).
— Requirements for a common management process of the Application Templates in multi-application
media and in the IFM Systems themselves (Clause 7).
The complements to the functional model of Part 1 and to Part 2 when independent Fare Management
Systems decide together to use multi-application media to develop interoperability are described:
— Insertion of the IFM functional model in a multi-application environment, and new roles that are
not included in Part 1 but are necessary for the management of the Media and of the Applications
(see Clause 8).
— Use cases and processes (see Clause 9).
These conclusions may be used to make different IFM Systems interoperable
— When each of them independently issues its Application Template for use in multi-application media.
— When they use a common complementary Application Template for a progressive integration.
© ISO 2013 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
---------------------- Page: 12 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
TECHNICAL REPORT ISO/TR 24014-3:2013(E)
Public transport — Interoperable fare management
system —
Part 3:
Complementary concepts to Part 1 for multi-application
media
1 Scope
This Technical Report describes how to implement Interoperable Fare Management (IFM) Applications
in a multi-application environment, and the additional roles and use cases that appear.
Multi-application media open new possibilities for separate secure IFM Applications to be loaded and
operated separately on the same Media.
This enables a customer oriented commercial interoperability with the possibility for the customer
to use the same Media in different Fare Management Systems independently of the fare policies and
specific local systems and without the need for any common commercial policies.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/IEC 7816 (all parts), Identification cards — Integrated circuit cards
ISO/IEC 14443-1, Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1:
Physical characteristics
ISO/IEC 14443-2, Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2:
Radio frequency power and signal interface
ISO/IEC 14443-3, Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3:
Initialization and anticollision
ISO/IEC 14443-4, Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4:
Transmission protocol
ISO/IEC 18092, Information technology — Telecommunications and information exchange between
systems — Near Field Communication — Interface and Protocol (NFCIP-1)
ISO 24014-1:2007, Public transport — Interoperable fare management system — Part 1: Architecture
ISO/TR 24014-2, Public transport — Interoperable fare management system — Part 2: Business practices
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 24014-1, ISO/TR 24014-2 and
the following apply.
© ISO 2013 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
3.1
media
device that can hold at least one Secure Element
3.2
Customer Media
device that holds a Secure Element initialised with one or more Applications
3.3
Secure Element
SE
physical component, whatever its form factor (embedded, removable or not) that can be installed in a
media to host Applications in a secure environment for their execution
3.4
SE Specification
set of specifications designed to Install, select, process and delete Applications in the SE
3.5
Secure Channel
communication mechanism from any source to a Secure Element that provides the required level of assurance
3.6
Security Domain
SD
software unit providing support for the control, security, and communication requirements of a Role,
e.g. the Application Retailer
2 © ISO 2013 – All rights reserved
---------------------- Page: 14 ----------------------
Extra part of set of rules
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
IFM ENVIRONMENT
IFM PARTNERSHIP
PARTNERS
IFIFM M COCOMMUNIMMUNITYTY
IFM Policy
Security
SE sec
Manager
Core part of set of rules
manager
Application
SE
Product
Other
Owner
owner Owner
roles
Application
SE Product
Retailer Registrar
retailer Retailer Service
Operator
SD
Manager
Intermediary
roles
Portal
Customer
Figure 1 — Main terms and definitions illustrated in the functional model
NOTE Figure 1 illustrates the above definitions in the functional model described in this Technical Report.
© ISO 2013 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
4 Symbols and abbreviated terms
GP GlobalPlatform
IFM Interoperable Fare Management
IFMS Interoperable Fare Management System
NFC Near Field Communication (refer to ISO/IEC 18092)
PT Public Transport
PTA Public Transport Authority
PTO Public Transport Operator
SCP Secure Channel Protocol
SE Secure Element
SD Security Domain
NOTE The usual term of ‘SD-Card’ may also be used in this Technical Specification in which case it refers to the
particular type of component.
UICC Universal Integrated Circuit Card
5 General context and limitations
This Technical Report first describes objectives and requirements for multi-application management
that are compatible with the type of Applications as described in the use cases of ISO 24014-1, which
require a high security level and must, in the multi-application context, be securely protected against
the other Applications (see Clauses 6 and 7).
A standardized technical architecture and standardised processes are needed to manage a multi-
application environment.
GlobalPlatform is acknowledged to be the only known currently available open standard to meet
the objectives and requirements defined herein. It is therefore proposed as today’s solution for the
standards process.
The internal security process of the Applications remains only dependant on each security policy.
Proprietary materials and methods do exist and may be chosen to address local needs for backward
compatibility, as a business alternative or as an answer to specific customers’ demands with limited
interoperability, despite the risk of unpredictable updates.
Other types of architectures mainly based on direct payment or on back-office centric systems using the
Media as an ID management have different needs and are not considered here.
The Technical Report then describes an extension of the ISO 24014-1 functional model to address
additional roles necessary to operate Applications in the new context independently of the Media form
factor or of its Secure Element (see Clause 8).
The details of applying multi-application to mobile ticketing form factors through the establishment of
associated partnerships agreements that may be needed between mobile network operators and transit
systems operators are not described herein.
The Technical Report does not address the financial processes that are attached to the Fare
Management System.
4 © ISO 2013 – All rights reserved
---------------------- Page: 16 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
The ways the Fare Management System can address the variety of payment means, e.g. credit or debit
cards, debit accounts, loyalty programs, bank-to-bank transfers or any access control accounts that may
provide payment, are not described.
The ways they can serve different service operators via a clearing house is also not described.
The use cases provided at the end of this Technical Report are limited to the cases when the set of
Applications installed within the multi-application media accordingly to the customer’s demand is
installed and updated under the responsibility of an organization that is not the customer itself.
Use cases that permit self-managed media are not discussed (see Clause 9).
6 Media functional architecture
6.1 Multi-application
Multi-application in the context of this Technical Report is an environment for the Secure Element (SE)
with the following characteristics as defined in ISO/IEC 7816-13 standard for cards.
(In the following list (a) to (i), the term SE replaces the terms ‘card’ or ‘media’ originally used in
ISO/IEC 7816-13
a) An application is a uniquely addressable set of functionalities on a multi-application media that
provides data storage and computational services.
b) An application may be added to the SE before or after the SE is issued.
c) This Technical Report focuses on Applications that can be added or deleted after the issuance,
independently from the fact that some of them can be installed during the issuance of the SE.
d) More than one application may be added to the SE.
e) The SE platform provides mechanisms for managing SE resources, e.g. memory.
f) The SE platform provides a security boundary mechanism for each application to prevent
unauthorized interaction and security violation from any other application on the SE.
g) The life cycle of an application is independent from the life cycle of any other application in the same SE.
h) The life cycle of an application is independent from the life cycle of the SE except when the SE is in
the termination state, as defined in ISO/IEC 7816-9.
This rule (i) is to be understood technically, independently from any business rules and responsibilities
that can be agreed between the Application Owners and Media Owner.
6.2 Functional model of the Media
The functional architecture of the Media considered in this Technical Report is described by Figure 2.
NOTE Functional blocks drawn with dotted lines are optional.
© ISO 2013 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST-TP CEN ISO/TR 24014-3:2013
ISO/TR 24014-3:2013(E)
Figure 2 — Media functional model
The Media is equipped with communication interfaces which may vary and use different protocols and
communication networks or links: USB, 3G/GSM mobile networks, Bluetooth, eSata, Firewire, etc and
may work over the air (OTA)or over the Internet (OTI).
It may also include a direct user interface (display outputs and/or command inputs) and be equipped for
other functionalities.
The Media contains a Secure Element that can host and execute the Applications.
Its operating system includes a security function (drawn as SE sec on Figure 2) that manages multi-
application environment and thus controls the downloading/upgrading/deletion operation of the
Applications.
This SE security function ensures application insulation with firewall and secures that the messages
coming from any communication interface are routed to the appropriate Application.
The routing process is performed without changing the content of the message itself.
A contactless proximity communication compliant with ISO/IEC 14443 or ISO/IEC 18092 standards is
compulsorily implemented.
It can be implemented in the Media itself or in the Secure Element.
For sm
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.