iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 125200:2002

(Main)

Sectional Specification: Magnetic oxide cores for linear transformers

Sectional Specification: Magnetic oxide cores for linear transformers

This sectional specification lists the characteristics, ratings and inspection requirements for magnetic cores of assessed quality for linear transformers intended for professional and industrial applications, excluding power, blocking and tuned transformers. It selects from the generic specification CECC 25 000 the appropriate methods of test to be used in detail specifications derived from this specification.

Rahmenspezifikation: Kerne aus magnetischen Oxiden für lineaire Übertrager

Spécification intermédiaire: Noyaux en oxyde magnétique destinés aux transformateurs linéaires

Sectional specification: Magnetic oxide cores for linear transformers

General Information

Status
Published
Publication Date
31-Aug-2002
ICS
29.100.10 - Magnetic components
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002
Ref Project
EN 125200:1991 - Sectional Specification: Magnetic oxide cores for linear transformers

Buy Standard

EN 125200:2002EN 125200:2002
PreviousNext
Standard
EN 125200:2002
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sectional specification: Magnetic oxide cores for linear transformersRahmenspezifikation: Kerne aus magnetischen Oxiden für lineaire ÜbertragerSpécification intermédiaire: Noyaux en oxyde magnétique destinés aux transformateurs linéairesSectional Specification: Magnetic oxide cores for linear transformers29.100.10Magnetne komponenteMagnetic componentsICS:Ta
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62323:2005(Main)
Dimensions of half pot-cores made of ferrite for inductive proximity switches
EN 62323:2005

Lays down the important dimensions for the mechanical interchangeability of a preferred half pot-core series of ferrites, intended to be used in inductive proximity switches.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60401-1:2005(Main)
Terms and nomenclature for cores made of magnetically soft ferrites -- Part 1: Terms used for physical irregularities
EN 60401-1:2005

Provides a nomenclature of the most frequent surface, bulk, and shape irregularities relevant to cores made of ferrites (magnetic oxides). Also recommends a consistent scheme for specifying the exact location of the irregularity, combining a general name for the location with more detailed qualifiers of the specified location.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62044-2:2005(Main)
Cores made of soft magnetic materials - Measuring methods -- Part 2: Magnetic properties at low excitation level
EN 62044-2:2005

This part of IEC 62044 applies to magnetic cores, mainly made of magnetic oxides or metallic
powders, used at low excitation level in inductors and transformers for telecommunication
equipment and electronic devices employing similar techniques.
Some of the methods described in this part of IEC 62044 may also be suitable for magnetic
cores used in other components.
This part of IEC 62044 gives guidance for the drafting of those parts of specifications for
magnetic cores that are concerned with measuring methods for magnetic and electric core
properties. This part of IEC 62044 is limited to the general principles to be followed for
various possible test methods and sets out the factors to be taken into account when deciding
on the description of the test method to be included in the specification.
NOTE All the formulae in this part of IEC 62044 use basic SI units. When multiples or submultiples are used, the
appropriate power of 10 should be introduced. The conversion factor for inductances and inductance factors is as
follows: 1 H = 109 nH.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62025-2:2005(Main)
High frequency inductive components - Non-electrical characteristics and measuring methods -- Part 2: Test methods for non-electrical characteristics
EN 62025-2:2005

Specifies a test method for the non-electrical characteristics of the surface mounted device inductors to be used for electronic and telecommunication equipment. Defines methods for measuring mechanical performance only. To be used in conjunction with EN 62211.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61185:2005(Main)
Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions
EN 61185:2005

Specifies the dimensions that are of importance for mechanical interchangeability for ETD-cores made of ferrite, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60401-3:2004(Main)
Terms and nomenclature for cores made of magnetically soft ferrites -- Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores
EN 60401-3:2003

Gives guidance for a uniform method of presentation for the properties of magnetically soft ferrite materials and measuring conditions under which they are to be determined. Is intended for use in manufacturers' catalogues of transformer and inductor cores, in order to aid the comparability of such data.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62211:2004(Main)
Inductive components - Reliability management
EN 62211:2004

Sets up a broad basis of electric and mechanical criteria of failure test procedures. Is applicable to inductive components (chokes and transformers) based on magnetically soft materials. Covers also discrete type components and the different types of surface-mountable inductive components (SMD).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62044-1:2004(Main)
Cores made of soft magnetic materials - Measuring methods -- Part 1: Generic specification
EN 62044-1:2002

Applies to magnetic cores made of soft magnetic materials used in inductors, transformers and devices used to suppress electromagnetic interference. Provides guidance for the specification of measuring methods for both magnetic and non-magnetic (for example, mechanical, electrical, etc.) properties.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 125000:2002(Main)
Generic Specification: Cores made of ferrite materials
EN 125000:1997

Supersedes CECC 25 000:1976

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 125400:2002(Main)
Sectional Specification: Adjusters used with magnetic oxide cores for use in inductors and tuned transformers
EN 125400:1991

This SS prescribes the characteristics and inspection requirements for adjusters of assessed quality for use with magnetic oxide (ferrite) cores intended for inductors and transformers in tuned circuits for professional and industrial applications.
It prescribes the appropriate test methods from the GS CECC 25 00 for use in detail specifications (DS) derived from this SS, and contains the test schedules to be used in the preparation of such DS. The blank detail specification (BDS) CECC 25 401 prescribes the information to be given in the test schedule in DS derived from this SS.
Adjusters complying with this specification are intended for use with cores made by the same manufacturer and may be used with cores complying with CECC 25 100. Their use enables the inductance of an indicator or transformer to be adjusted for tuning.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day