iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 17084:2019/AC:2020

(Corrigendum)

Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components

Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components

This document describes the measurement of the toxicity potential of the products of combustion based on two test methods:
- Method 1: EN ISO 5659-2 Smoke chamber area-based test with Fourier transform infrared spectroscopy (FTIR) gas analysis techniques;
- Method 2: NF X70-100-2 Tubular furnace small mass-based test.
NOTE 1 This document also specifies test equipment and set out the calculation procedures for evaluation of toxicity data.
NOTE 2 This document can be used in addition to others for the determination of toxic gases from devices installed in tunnel.

Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Prüfung der Toxizität von Materialien und Komponenten

Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Essai de toxicité des matériaux et des composants

Železniške naprave - Požarna zaščita v železniških vozilih - Preskušanje toksičnosti materialov in sestavnih delov - Popravek AC

General Information

Status
Published
Publication Date
01-Apr-2020
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
45.060.01 - Railway rolling stock in general
Technical Committee
IŽNP - Reilway applications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
30-Mar-2020
Due Date
04-Jun-2020
Completion Date
02-Apr-2020
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
EN 17084:2018/AC:2020 - Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components

Relations

Corrects
SIST EN 17084:2019 - Railway applications - Fire protection in railway vehicles - Toxicity test of materials and components
Effective Date
25-Dec-2019

Buy Standard

EN 17084:2019/AC:2020EN 17084:2019/AC:2020
PreviousNext
Corrigendum
EN 17084:2019/AC:2020
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17084:2019/AC:2020
01-junij-2020
Železniške naprave - Požarna zaščita v železniških vozilih - Preskušanje
toksičnosti materialov in sestavnih delov - Popravek AC
Railway applications - Fire protection on railway vehicles - Toxicity test of materials and
components
Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Prüfung der Toxizität von
Materialien und Komponenten
Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires
- Essai de toxicité des matériaux et des composants
Ta slovenski standard je istoveten z: EN 17084:2018/AC:2020
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 17084:2019/AC:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17084:2019/AC:2020

---------------------- Page: 2 ----------------------
SIST EN 17084:2019/AC:2020


EUROPEAN STANDARD EN 17084:2018/AC

NORME EUROPÉENNE
March 2020


EUROPÄISCHE NORM
ICS 13.220.40; 45.060.01
English version

Railway applications - Fire protection on railway vehicles - Toxicity test of
materials and components
Applications ferroviaires - Protection contre Bahnanwendungen - Brandschutz in
les incendies dans les véhicules ferroviaires - Schienenfahrzeugen - Prüfung der Toxizität
Essai de toxicité des matériaux et des von Materialien und Komponenten
composants
This corrigendum becomes effective on 18 March 2020 for incorporation in the official English
version of the EN.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17084:2019(Main)
Railway applications - Fire protection in railway vehicles - Toxicity test of materials and components
EN 17084:2018

This standard specifies the toxicity test on materials and components of railway vehicles.
This standard describes the testing methods for determination of toxic gases from railway products.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-4:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair screened or not screened sheathed cables
EN 50306-4:2020

EN 50306-4 specifies requirements for, and constructions and dimensions of, multicore and multipair cables rated voltage Uo/U: 300/500 V, of the following types:
- unscreened, sheathed for either exposed or protected wiring, 0,5 mm2 to 2,5 mm2, number of cores from 2 to 48;
- screened, sheathed for either exposed or protected wiring, 0,5 mm2 to 2,5 mm2, number of cores from 2 to 8;
- unscreened, sheathed for either exposed or protected wiring, 0,5 mm2 to 1,5 mm2, number of screened pairs of cores from 2 to 7;
- screened, sheathed for either exposed or protected wiring, 0,5 mm2 to 1,5 mm2, number of unscreened pairs of cores from 2 to 7.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50305:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Test methods
EN 50305:2020

This standard specifies special test methods applicable to cables, and their constituent insulating and sheathing materials, for use in railway rolling stock.  Such cables are specified in the various parts of EN 50264, EN 50306 and EN 50382.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-1:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements
EN 50306-1:2020

EN 50306 1 specifies the general requirements applicable to the cables given EN 50306 2, EN 50306 3 and EN 50306 4. It includes the detailed requirements for S2 sheathing materials and other components called up in the separate Parts. In particular EN 50306 1 specifies those requirements relating to fire safety which enable the cables to satisfy Hazard Level3 of EN 45545-1 and -2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-3:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables screened and thin wall sheathed
EN 50306-3:2020

EN 50306-3 specifies requirements for, and constructions and dimensions of, multicore cables, rated voltage Uo/U=300/500 V, of the following type: Screened, 0,5 mm2 to 2,5 mm2, number of cores from 1 to 8. All cables have stranded tinned copper conductors, and thin wall thickness, halogen-free, insulation and sheath. They are for use in railway rolling stock as fixed wiring, or wiring where limited flexing in operation is encountered.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-2:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables
EN 50306-2:2020

EN 50306-2 specifies requirements for, and constructions and dimensions of, single core cables, rated voltage Uo / U= 300 /300 V, of the following type:  Unscreened, 0,5 mm2 to 2,5 mm2 single core

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17084:2019(Main)
Railway applications - Fire protection in railway vehicles - Toxicity test of materials and components
EN 17084:2018

This standard specifies the toxicity test on materials and components of railway vehicles.
This standard describes the testing methods for determination of toxic gases from railway products.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50382-1:2008/A1:2013(Amendment)
Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 1: General requirements
EN 50382-1:2008/A1:2013

This Part 1 of EN 50382 specifies the general requirements applicable to the cables given in EN 50382-2. It includes the detailed requirements for the insulating and sheathing materials and other components called up in EN 50382-2. In particular EN 50382-1 specifies those requirements relating to fire safety. Based on proven experience and reliability over many years these cables are rated for occasional thermal stresses causing ageing equivalent to continuous operational life at a conductor temperature of either 120 °C or 150 °C. The maximum temperature for short circuit conditions for silicone rubber is 350 °C based on a duration of 5 s. Although both of the insulating and one of the sheathing compounds specified in this standard are thermally capable of operating at 150 °C, where tinned conductors are used the maximum operating temperature is limited to 120 °C and for the same technical reason the maximum short circuit temperature, for tinned copper conductors, is limited to 250 °C. The choice of sheath may also limit the operating temperature to 120 °C. This Part 1 should be used in conjunction with EN 50382-2.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50382-2:2008/A1:2013(Amendment)
Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 2: Single core silicone rubber insulated cables for 120 °C or 150 °C
EN 50382-2:2008/A1:2013

Part 2 of EN 50382 specifies requirements for, and constructions and dimensions of, single core cables of the following types and voltage ratings: - 1,8/3 kV unscreened, unsheathed with or without textile braid (1,5 mm² to 400 mm²); - 1,8/3 kV unscreened, sheathed (1,5 mm² to 400 mm²); - 3,6/6 kV unscreened, unsheathed with or without textile braid (2,5 mm² to 400 mm²); - 3,6/6 kV unscreened, sheathed (2,5 mm² to 400 mm²). All cables have class 5 or class 6 tinned or plain copper conductors to EN 60228, halogen-free insulation and where applicable halogen-free sheath. They are for use in railway rolling stock as fixed wiring, or wiring where limited flexing in operation is encountered. The requirements provide for a continuous conductor temperature not exceeding 120 °C or 150 °C and a maximum temperature for short circuit conditions of either 250 °C or 350 °C based on a duration of 5 s. When the insulating compounds and sheath specified in this standard which are thermally capable of operating at 150 °C are used with tinned conductors, the maximum operating temperature is limited to 120 °C and, for the same technical reason, the maximum short circuit temperature is limited to 250 °C. The choice of sheath may also limit the maximum operating temperature to 120 °C. A textile braid may be included in the insulation or applied at its surface to unsheathed cables. Under fire conditions the cables exhibit special performance characteristics in respect of maximum permissible flame propagation (flame spread) and maximum permissible emission of smoke and toxic gases. This Part 2 of EN 50382 should be used in conjunction with Part 1 "General requirements".

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50382-1:2008
Railway applications - Railway rolling stock high temperature power cables having special fire performance -- Part 1: General requirements
EN 50382-1:2008

This Part 1 of EN 50382 specifies the general requirements applicable to the cables given in EN 50382-2. It includes the detailed requirements for the insulating and sheathing materials and other components called up in EN 50382-2. In particular EN 50382-1 specifies those requirements relating to fire safety.  Based on proven experience and reliability over many years these cables are rated for occasional thermal stresses causing ageing equivalent to continuous operational life at a conductor temperature of either 120 °C or 150 °C. NOTE This rating is based upon the polymer defined in 3.1. Before this polymer had gained widespread acceptance in the cable industry, ageing performance had been assessed via long term thermal endurance testing and had been extrapolated to 20 000 h using techniques equivalent to those in EN 60216. Subsequent experience in service has demonstrated that the predicted performance levels were correct. Where extrapolated data is used to predict lifetime in service it should be confirmed with the cable manufacturer, and should be based on a failure mode appropriate to the type of material or cable.  The maximum temperature for short circuit conditions for silicone rubber is 350 °C based on a duration of 5 s.  Although both of the insulating and one of the sheathing compounds specified in this standard are thermally capable of operating at 150 °C, where tinned conductors are used the maximum operating temperature is limited to 120 °C and for the same technical reason the maximum short circuit temperature, for tinned copper conductors, is limited to 250 °C. The choice of sheath may also limit the operating temperature to 120 °C. This Part 1 should be used in conjunction with EN 50382-2.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day