SIST IEC 62642-6:2024
(Main)Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies
Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies
IEC 62642-6:2011 specifies the requirements, performance criteria and testing procedures for power supplies (PS) to be used as part of Intrusion and Hold up Alarm Systems (I&HAS). The PS shall either be an integral part of an I&HAS component or stand-alone. The control functions of the PS may be incorporated as part of the PS device, or may be provided by another I&HAS component e.g. a control and indicating equipment.
Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 6: Alimentation
La CEI 62642-6:2011 spécifie les exigences, les critères de performance et les procédures d'essai pour les alimentations destinées à être utilisées comme partie de systèmes d'alarme contre l'intrusion et les hold-up (I&HAS). L'alimentation doit être intégrée à un composant d'un I&HAS ou être un ensemble séparé. Les fonctions de commande de l'alimentation peuvent être intégrées comme partie du dispositif de l'alimentation, ou peuvent être fournies par un autre composant de l'I&HAS, par exemple un équipement de contrôle et de signalisation.
Alarmni sistemi - Sistemi za javljanje vloma in ropa - 6. del: Napajalniki (IEC 62642-6:2011)
Standard IEC 62642-6:2011 določa zahteve, merila uspešnosti in preskusne postopke za napajalnike (PS) za uporabo kot del alarmnega sistema za javljanje vloma in ropa (I&HAS). Napajalnik je lahko sestavni del komponente sistema za javljanje vloma in ropa ali samostojna enota. Krmilne funkcije napajalnika so lahko vključene kot del napajalne naprave ali pa jih lahko zagotavlja druga komponenta sistema za javljanje vloma in ropa, npr. nadzorna in indikatorska oprema.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST IEC 60839-1-2:1995
Alarmni sistemi - Sistemi za javljanje vloma in ropa - 6. del: Napajalniki (IEC 62642-
6:2011)
Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies
Systèmes d'alarme - Systèmes d'alarme contre l'intrusion et les hold-up - Partie 6:
Alimentation
Ta slovenski standard je istoveten z: IEC 62642-6:2011
ICS:
13.310 Varstvo pred kriminalom Protection against crime
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
IEC 62642-6 ®
Edition 1.0 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm systems – Intrusion and hold-up systems –
Part 6: Power supplies
Systèmes d'alarme – Systèmes d'alarme contre l’intrusion et les hold-up –
Partie 6: Alimentation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 13.320 ISBN 978-2-88912-356-8
– 2 – 62642-6 © IEC:2011
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and abbreviations . 11
3.1 Terms and definitions . 11
3.2 Abbreviations . 13
4 Functional requirements . 13
4.1 General . 13
4.2 Monitoring of PS . 15
4.2.1 Loss of EPS . 16
4.2.2 Storage device – Low voltage . 16
4.2.3 Storage device – Failure . 17
4.2.4 Low output voltage . 17
4.2.5 Power unit failure . 17
4.2.6 Remote test . 18
4.3 APS capability . 18
4.4 Recharging for PS type A . 18
4.5 Over-voltage protection . 19
4.6 Short circuit protection . 19
4.7 Overload protection . 19
4.8 Deep discharge protection . 19
4.9 Automatic changeover to APS . 19
4.10 Ripple . 19
4.11 Tamper security . 20
4.11.1 Tamper protection . 20
4.11.2 Tamper detection. 20
4.12 Environment . 21
4.13 Safety . 22
4.14 EMC . 22
4.15 Electrical . 22
4.15.1 Connections . 22
4.15.2 Rated output . 23
4.15.3 Output voltage range . 23
4.15.4 Input voltage range . 23
4.15.5 Output voltage stability – Gradual load variation . 23
4.15.6 Output voltage stability – Switched load variation . 23
4.15.7 Transients on the power outputs . 23
5 Marking . 23
6 Documentation . 24
7 Tests . 24
7.1 General test conditions . 25
7.1.1 Standard laboratory conditions for testing . 25
7.1.2 General detection testing environment and procedures. 25
7.1.3 Signal or message processing time . 25
7.1.4 Load electrical characteristics. 26
62642-6 © IEC:2011 – 3 –
7.1.5 SD discharged condition . 26
7.2 Reduced functional test . 26
7.2.1 Principle . 26
7.2.2 Test conditions . 26
7.2.3 Mounting . 26
7.2.4 Procedure . 26
7.2.5 Pass/Fail criteria. 27
7.3 PS rating . 27
7.3.1 Principle . 27
7.3.2 Test conditions . 27
7.3.3 Mounting . 27
7.3.4 Procedure . 27
7.3.5 Pass/Fail criteria. 28
7.4 Output voltage stability – Gradual load variation . 28
7.4.1 Principle . 28
7.4.2 Test conditions . 28
7.4.3 Mounting . 28
7.4.4 Procedure . 28
7.4.5 Pass/Fail criteria. 28
7.5 Output voltage stability – Switched load variation . 29
7.5.1 Principle . 29
7.5.2 Test conditions . 29
7.5.3 Mounting . 29
7.5.4 Procedure . 29
7.5.5 Pass/Fail criteria. 29
7.6 Signalling: loss of EPS . 30
7.6.1 Principle . 30
7.6.2 Test conditions . 30
7.6.3 Mounting . 30
7.6.4 Procedure . 30
7.6.5 Pass/Fail criteria. 30
7.7 Signalling: storage device – Low voltage . 30
7.7.1 Principle . 30
7.7.2 Test conditions . 30
7.7.3 Mounting . 30
7.7.4 Procedure – Phase I . 31
7.7.5 Procedure – Phase II . 31
7.7.6 Pass/Fail criteria. 31
7.8 Signalling: storage device – Failure . 32
7.8.1 Principle . 32
7.8.2 Test conditions . 32
7.8.3 Mounting . 32
7.8.4 Procedure – Phase I . 32
7.8.5 Procedure – Phase II . 32
7.8.6 Pass/Fail criteria. 32
7.9 Signalling: low output voltage . 32
7.9.1 Principle . 32
7.9.2 Test conditions . 32
7.9.3 Mounting . 33
– 4 – 62642-6 © IEC:2011
7.9.4 Procedure . 33
7.9.5 Pass/Fail criteria. 33
7.10 Signalling: power unit failure . 33
7.10.1 Principle . 33
7.10.2 Test conditions . 33
7.10.3 Mounting . 33
7.10.4 Procedure . 33
7.10.5 Pass/Fail criteria. 34
7.11 Signalling: power unit failure – SD charging . 34
7.11.1 Principle . 34
7.11.2 Test conditions . 34
7.11.3 Mounting . 34
7.11.4 Procedure . 34
7.11.5 Pass/Fail criteria. 34
7.12 Remote test . 34
7.12.1 Principle . 34
7.12.2 Test
...
IEC 62642-6 ®
Edition 1.0 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm systems – Intrusion and hold-up systems –
Part 6: Power supplies
Systèmes d'alarme – Systèmes d'alarme contre l’intrusion et les hold-up –
Partie 6: Alimentation
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 62642-6 ®
Edition 1.0 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Alarm systems – Intrusion and hold-up systems –
Part 6: Power supplies
Systèmes d'alarme – Systèmes d'alarme contre l’intrusion et les hold-up –
Partie 6: Alimentation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 13.320 ISBN 978-2-88912-356-8
– 2 – 62642-6 © IEC:2011
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms, definitions and abbreviations . 11
3.1 Terms and definitions . 11
3.2 Abbreviations . 13
4 Functional requirements . 13
4.1 General . 13
4.2 Monitoring of PS . 15
4.2.1 Loss of EPS . 16
4.2.2 Storage device – Low voltage . 16
4.2.3 Storage device – Failure . 17
4.2.4 Low output voltage . 17
4.2.5 Power unit failure . 17
4.2.6 Remote test . 18
4.3 APS capability . 18
4.4 Recharging for PS type A . 18
4.5 Over-voltage protection . 19
4.6 Short circuit protection . 19
4.7 Overload protection . 19
4.8 Deep discharge protection . 19
4.9 Automatic changeover to APS . 19
4.10 Ripple . 19
4.11 Tamper security . 20
4.11.1 Tamper protection . 20
4.11.2 Tamper detection. 20
4.12 Environment . 21
4.13 Safety . 22
4.14 EMC . 22
4.15 Electrical . 22
4.15.1 Connections . 22
4.15.2 Rated output . 23
4.15.3 Output voltage range . 23
4.15.4 Input voltage range . 23
4.15.5 Output voltage stability – Gradual load variation . 23
4.15.6 Output voltage stability – Switched load variation . 23
4.15.7 Transients on the power outputs . 23
5 Marking . 23
6 Documentation . 24
7 Tests . 24
7.1 General test conditions . 25
7.1.1 Standard laboratory conditions for testing . 25
7.1.2 General detection testing environment and procedures. 25
7.1.3 Signal or message processing time . 25
7.1.4 Load electrical characteristics. 26
62642-6 © IEC:2011 – 3 –
7.1.5 SD discharged condition . 26
7.2 Reduced functional test . 26
7.2.1 Principle . 26
7.2.2 Test conditions . 26
7.2.3 Mounting . 26
7.2.4 Procedure . 26
7.2.5 Pass/Fail criteria. 27
7.3 PS rating . 27
7.3.1 Principle . 27
7.3.2 Test conditions . 27
7.3.3 Mounting . 27
7.3.4 Procedure . 27
7.3.5 Pass/Fail criteria. 28
7.4 Output voltage stability – Gradual load variation . 28
7.4.1 Principle . 28
7.4.2 Test conditions . 28
7.4.3 Mounting . 28
7.4.4 Procedure . 28
7.4.5 Pass/Fail criteria. 28
7.5 Output voltage stability – Switched load variation . 29
7.5.1 Principle . 29
7.5.2 Test conditions . 29
7.5.3 Mounting . 29
7.5.4 Procedure . 29
7.5.5 Pass/Fail criteria. 29
7.6 Signalling: loss of EPS . 30
7.6.1 Principle . 30
7.6.2 Test conditions . 30
7.6.3 Mounting . 30
7.6.4 Procedure . 30
7.6.5 Pass/Fail criteria. 30
7.7 Signalling: storage device – Low voltage . 30
7.7.1 Principle .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.