Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages

This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same chemical protective barrier requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well require testing according to test method standards which are not included in this standard.
While these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicate the intended use of the protective clothing and that the user (specifier) carries out a risk assessment in order to establish the correct performance level for the intended task.

Schutzkleidung gegen Chemikalien - Prüfverfahren und Leistungseinstufung für Materialien, Nähte, Verbindungen und Verbünde

Habillement de protection contre les produits chimiques - Méthodes d'essai et classification de performance des matériaux, coutures, jonctions et assemblages des vêtements de protection chimique

Varovalne obleke pred kemikalijami - Preskusne metode in zahteve za razvrščanje materialov za izdelavo varovalnih oblek, šivanje, spajanje in sestavljanje - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
27-Feb-2023
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
06-Jun-2024
Due Date
11-Jun-2024

Relations

Buy Standard

Draft
EN 14325:2018/oprA1:2023
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14325:2018/oprA1:2023
01-februar-2023
Varovalne obleke pred kemikalijami - Preskusne metode in zahteve za razvrščanje
materialov za izdelavo varovalnih oblek, šivanje, spajanje in sestavljanje -
Dopolnilo A1
Protective clothing against chemicals - Test methods and performance classification of
chemical protective clothing materials, seams, joins and assemblages
Schutzkleidung gegen Chemikalien - Prüfverfahren und Leistungseinstufung für
Materialien, Nähte, Verbindungen und Verbünde
Habillement de protection contre les produits chimiques - Méthodes d'essai et
classification de performance des matériaux, coutures, jonctions et assemblages des
vêtements de protection chimique
Ta slovenski standard je istoveten z: EN 14325:2018/prA1
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN 14325:2018/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14325:2018/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN 14325:2018/oprA1:2023


DRAFT
EUROPEAN STANDARD
EN 14325:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
December 2022
ICS
English Version

Protective clothing against chemicals - Test methods and
performance classification of chemical protective clothing
materials, seams, joins and assemblages
Habillement de protection contre les produits Schutzkleidung gegen Chemikalien - Prüfverfahren und
chimiques - Méthodes d'essai et classification de Leistungseinstufung für Materialien, Nähte,
performance des matériaux, coutures, jonctions et Verbindungen und Verbünde
assemblages des vêtements de protection chimique
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 162.

This draft amendment A1, if approved, will modify the European Standard EN 14325:2018. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14325:2018/prA1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14325:2018/oprA1:2023
EN 14325:2018/prA1:2022 (E)
Contents Page

European foreword . 3
1 Modification to Clause 2, Normative references . 4
2 Modification to 4.4.2.1, General . 4
3 Modification to 4.4.2.2, Pressure pot end-point determination . 4
4 Modification to 4.4.2.3, Hydrostatic head end-point determination . 5
5 Modification to 4.4.2.4, Visual inspection end-point determination . 5
6 Modification to 4.5.2.1, General . 5
7 Modification to 4.5.2.3, Hydrostatic head end-point determination . 6
8 Modification to 4.5.2.4, Visual inspection end-point determination . 7
9 Modification to 4.7, Trape
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.