SIST EN ISO 19115:2005
(Main)Geographic information - Metadata (ISO 19115:2003)
Geographic information - Metadata (ISO 19115:2003)
This International Standard defines the schema required for describing geographic information and services. It provides information about the identification, the extent, the quality, the spatial and temporal schema, spatial reference, and distribution of digital geographic data.
This International Standard is applicable to:
- the cataloguing of datasets, clearinghouse activities, and the full description of datasets;
- geographic datasets, dataset series, and individual geographic features and feature properties. This International Standard defines:
- mandatory and conditional metadata sections, metadata entities, and metadata elements;
- the minimum set of metadata required to serve the full range of metadata applications (data discovery, determining data fitness for use, data access, data transfer, and use of digital data);
- optional metadata elements – to allow for a more extensive standard description of geographic data, if required;
- a method for extending metadata to fit specialized needs.
Though this International Standard is applicable to digital data, its principles can be extended to many other forms of geographic data such as maps, charts, and textual documents as well as non-geographic data.
Geoinformation - Metadaten (ISO 19115:2003)
Information géographique - Métadonnées (ISO 19115:2003)
Geografske informacije – Metapodatki (ISO 19115:2003)
mednarodni standard določa shemo, ki je potrebna za opisovanje geografskih informacij in storitev. Podaja informacije o identifikaciji, obsegu, kakovosti, prostorski in časovni shemi, opisu lociranja in distribuciji digitalnih geografskih podatkov.
Ta mednarodni standard se uporablja za:
– katalogizacijo podatkovnih nizov, klirinške dejavnosti in popolni opis podatkovnih nizov;
– geografske podatkovne nize, serije podatkovnih nizov ter posamezne geografske značilnosti in lastnosti značilnosti. Ta mednarodni standard določa:
– obvezne in pogojne dele metapodatkov, vnose metapodatkov in elemente metapodatkov;
– najmanjši niz metapodatkov, ki služi za celoten obseg uporabe metapodatkov (odkrivanje podatkov, določanje ustreznosti podatkov za uporabo, dostop do podatkov, prenos podatkov in uporaba digitalnih podatkov);
– izbirne elemente metapodatkov, ki omogočajo obširnejši standardni opis geografskih podatkov, če je to potrebno;
– metodo za razširitev metapodatkov, da ustrezajo posebnim potrebam.
Čeprav se ta mednarodni standard uporablja za digitalne podatke, lahko v njem opisana načela veljajo tudi za druge oblike geografskih podatkov, kot so zemljevidi, karte in dokumenti z besedilom, ter podatke, ki niso geografski.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19115:2005
01-april-2005
Geografske informacije – Metapodatki (ISO 19115:2003)
Geographic information - Metadata (ISO 19115:2003)
Geoinformation - Metadaten (ISO 19115:2003)
Information géographique - Métadonnées (ISO 19115:2003)
Ta slovenski standard je istoveten z: EN ISO 19115:2005
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19115:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19115:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 19115:2005
EUROPEAN STANDARD
EN ISO 19115
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 35.240.70
English version
Geographic information - Metadata (ISO 19115:2003)
Information géographique - Métadonnées (ISO Geoinformation - Metadaten (ISO 19115:2003)
19115:2003)
This European Standard was approved by CEN on 24 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19115:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19115:2005
EN ISO 19115:2005 (E)
Foreword
The text of ISO 19115:2003 has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics” of the International Organization for Standardization (ISO)
and has been taken over as EN ISO 19115:2005 by Technical Committee CEN/TC 287
"Geographic Information", the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2005, and conflicting national standards
shall be withdrawn at the latest by July 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 19115:2003 has been approved by CEN as EN ISO 19115:2005 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19115:2005
INTERNATIONAL ISO
STANDARD 19115
First edition
2003-05-01
Geographic information — Metadata
Information géographique — Métadonnées
Reference number
ISO 19115:2003(E)
©
ISO 2003
---------------------- Page: 5 ----------------------
SIST EN ISO 19115:2005
ISO 19115:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 19115:2005
ISO 19115:2003(E)
Contents Page
Foreword . vii
Introduction. viii
1 Scope.1
2 Conformance .1
2.1 Conformance requirements .1
2.2 Metadata Profiles.1
2.3 Obligation and condition .2
3 Normative references.2
4 Terms and definitions .3
5 Symbols and abbreviated terms .4
5.1 Abbreviations.4
5.2 UML notations.4
5.3 UML model relationships.5
5.3.1 Associations .5
5.3.2 Generalization.5
5.3.3 Instantiation/Dependency.5
5.3.4 Roles.5
5.4 UML model stereotypes.6
5.5 Package abbreviations.7
5.6 UML model/data dictionary relationships.8
6 Requirements.8
6.1 Metadata for geographic data requirement .8
6.2 Metadata application information.8
6.3 Metadata packages.9
6.3.1 Metadata package and entity relationship.9
6.3.2 Package descriptions.11
6.4 Metadata datatypes .14
6.4.1 Extent information (EX_Extent) .14
6.4.2 Citation and responsible party information (CI_Citation and CI_ResponsibleParty) .15
6.5 Core metadata for geographic datasets.15
6.6 Unified Modelling Language (UML) diagrams .16
6.7 Data dictionary.16
6.8 Metadata extensions and profiles.17
6.9 Abstract test suite .17
6.10 Comprehensive dataset metadata application profile.17
6.11 Metadata extension methodology .17
6.12 Metadata implementation .17
6.13 Hierarchical levels of metadata.17
6.14 Implementation examples .17
6.15 Multilingual support for free text fields.17
Annex A (normative) Metadata schemas.18
A.1 Metadata UML models.18
A.2 Metadata package UML diagrams.19
A.2.1 Metadata entity set information .19
A.2.2 Identification information .19
A.2.3 Constraint information.21
A.2.4 Data quality information .22
A.2.5 Maintenance information.25
A.2.6 Spatial representation information.26
© ISO 2003 — All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 19115:2005
ISO 19115:2003(E)
A.2.7 Reference system information . 27
A.2.8 Content information. 28
A.2.9 Portrayal catalogue information. 29
A.2.10 Distribution information. 30
A.2.11 Metadata extension information. 31
A.2.12 Application schema information. 32
A.3 Metadata data types . 33
A.3.1 Extent information . 33
A.3.2 Citation and responsible party information . 34
Annex B (normative) Data dictionary for geographic metadata. 35
B.1 Data dictionary overview . 35
B.1.1 Introduction. 35
B.1.2 Name/role name . 35
B.1.3 Short name and domain code . 35
B.1.4 Definition . 35
B.1.5 Obligation/Condition . 36
B.1.6 Maximum occurrence. 36
B.1.7 Data type. 36
B.1.8 Domain. 36
B.2 Metadata package data dictionaries . 38
B.2.1 Metadata entity set information. 38
B.2.2 Identification information (includes data and service identification). 40
B.2.3 Constraint information (includes legal and security) . 46
B.2.4 Data quality information. 48
B.2.5 Maintenance information . 57
B.2.6 Spatial representation information (includes grid and vector representation). 59
B.2.7 Reference system information (includes temporal, coordinate and geographic identifiers). 63
B.2.8 Content information (includes Feature catalogue and Coverage descriptions). 68
B.2.9 Portrayal catalogue information. 73
B.2.10 Distribution information. 73
B.2.11 Metadata extension information. 78
B.2.12 Application schema information. 80
B.3 Data type information. 81
B.3.1 Extent information . 81
B.3.2 Citation and responsible party information . 85
B.4 Externally referenced entities. 91
B.4.1 Introduction. 91
B.4.2 Date and DateTime information. 91
B.4.3 Distance, angle, measure, number, record, recordType, scale and UomLength information. 91
B.4.4 Feature type, property type, and attribute type information . 91
B.4.5 PeriodDuration and temporal primitive information . 91
B.4.6 Point and Object information . 92
B.4.7 Set and Sequence information. 92
B.4.8 Type name information . 92
B.4.9 Vertical datum information . 92
B.5 CodeLists and enumerations . 92
B.5.1 Introduction. 92
B.5.2 CI_DateTypeCode <> . 92
B.5.3 CI_OnLineFunctionCode <>. 93
B.5.4 CI_PresentationFormCode <> . 93
B.5.5 CI_RoleCode <>. 93
B.5.6 DQ_EvaluationMethodTypeCode <>. 94
B.5.7 DS_AssociationTypeCode <> . 94
B.5.8 DS_InitiativeTypeCode <>.94
B.5.9 MD_CellGeometryCode <>. 95
B.5.10 MD_CharacterSetCode <>. 95
B.5.11 MD_ClassificationCode <>. 96
B.5.12 MD_CoverageContentTypeCode <>. 96
B.5.13 MD_DatatypeCode <> . 97
iv © ISO 2003 — All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 19115:2005
ISO 19115:2003(E)
B.5.14 MD_DimensionNameTypeCode <> .97
B.5.15 MD_GeometricObjectTypeCode <> .97
B.5.16 MD_ImagingConditionCode <> .98
B.5.17 MD_KeywordTypeCode <> .98
B.5.18 MD_MaintenanceFrequencyCode <>.99
B.5.19 MD_MediumFormatCode <> .99
B.5.20 MD_MediumNameCode <>.99
B.5.21 MD_ObligationCode <>.100
B.5.22 MD_PixelOrientationCode <>.100
B.5.23 MD_ProgressCode <> .100
B.5.24 MD_RestrictionCode <> .101
B.5.25 MD_ScopeCode <> .101
B.5.26 MD_SpatialRepresentationTypeCode <> .102
B.5.27 MD_TopicCategoryCode << Enumeration>> .102
B.5.28 MD_TopologyLevelCode <>.104
Annex C (normative) Metadata extensions and profiles.105
C.1 Background.105
C.2 Types of extensions.105
C.3 Creating an extension.105
C.4 Rules for creating an extension.105
C.5 Community profile.106
C.6 Rules for creating a profile.107
Annex D (normative) Abstract test suite .108
D.1 Abstract test suite .108
D.2 Metadata test suite .108
D.2.1 Test case identifier: Completeness test.108
D.2.2 Test case identifier: Maximum occurrence test .108
D.2.3 Test case identifier: Short name test .108
D.2.4 Test case identifier: Data type test.109
D.2.5 Test case identifier: Domain test.109
D.2.6 Test case identifier: Schema test .109
D.3 User-defined extension metadata test suite.109
D.3.1 Test case identifier: Exclusiveness test .109
D.3.2 Test case identifier: Definition test.110
D.3.3 Test case identifier: Standard metadata test.110
D.4 Metadata profiles.110
D.4.1 Test case identifier: Metadata profiles.110
Annex E (normative) Comprehensive dataset metadata application profile .111
E.1 Comprehensive dataset metadata application schema .111
E.2 Comprehensive dataset metadata profile – UML model .112
Annex F (informative) Metadata extension methodology.113
F.1 Metadata extensions methodology .113
F.2 Review of existing metadata elements (Stage 1) .113
F.3 Definition of a new metadata section (Stage 2).114
F.4 Definition of a new metadata codelist (Stage 3).114
F.5 Definition of a new metadata codelist element (Stage 4).114
F.6 Definition of a new metadata element (Stage 5).115
F.7 Definition of a new metadata entity (Stage 6).115
F.8 Definition of a more stringent metadata obligation (Stage 7).116
F.9 Definition of more restrictive metadata codelist (Stage 8).116
F.10 Documentation of metadata extensions (Stage 9).117
Annex G (informative) Metadata implementation .119
G.1 Background.119
G.1.1 Problem statement .119
G.1.2 Scope and objectives.119
G.1.3 Granularity of spatial data supported .119
G.2 Metadata hierarchy levels.120
© ISO 2003 — All rights reserved v
---------------------- Page: 9 ----------------------
SIST EN ISO 19115:2005
ISO 19115:2003(E)
G.2.1 Dataset series metadata (optional) . 120
G.2.2 Dataset metadata . 120
G.2.3 Feature type metadata (optional) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.