Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard

This standard specifies the characteristics of dummy receptacles in the family of circular, electrical connectors, with triple start threaded coupling.
It applies to models in Table 3.
For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 or EN 3645-012 respectively.
These receptacles are derived from and interchangeable with those in specification MIL-DTL-38999/22.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 013: Blinddose - Produktnorm

Diese Norm legt die Eigenschaften von Blinddosen in der Familie der elektrischen Rundsteckverbinder mit dreigängiger Gewinde-Schnellkupplung fest.
Sie gilt für die in Tabelle 3 angegebenen Bauformen.
Hinsichtlich der freien Steckverbinder und Schutzkappen siehe EN 3645 006, EN 3645 008, EN 3645 011 oder EN 3645 012.
Diese festen Steckverbinder wurden von den Steckverbindern in der Spezifikation MIL DTL 38999/22 abge¬leitet und sind mit diesen austauschbar.

Série aérospatiale - Connecteurs électriques circulaires à contacts protégés, à accouplement par filetage à pas rapide à trois filets, températures d'utilisation 175 °C ou 200 °C continu - Partie 013 : Embase de repos - Norme de produit

Aeronavtika - Konektorji, električni, okrogli, zaščiten kontakt, hitra spojka z navojem, stalna delovna temperatura 175 °C ali 200 °C - 013. del: Slepa doza - Standard za proizvod

General Information

Status
Withdrawn
Publication Date
30-Mar-2009
Withdrawal Date
25-Jun-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Jun-2019
Due Date
13-Jul-2019
Completion Date
26-Jun-2019

RELATIONS

Buy Standard

Standard
SIST EN 3645-013:2009
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, dreigängige Gewinde-Schnellkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 013: Blinddose - ProduktnormSérie aérospatiale - Connecteurs électriques circulaires à contacts protégés, à accouplement par filetage à pas rapide à trois filets, températures d'utilisation 175 °C ou 200 °C continu - Partie 013 : Embase de repos - Norme de produitAerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3645-013:2007SIST EN 3645-013:2009en,de01-maj-2009SIST EN 3645-013:2009SLOVENSKI

STANDARD
SIST EN 3645-013:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3645-013
April 2007 ICS 49.060 English Version

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard

Série aérospatiale - Connecteurs électriques circulaires à contacts protégés, à accouplement par filetage à pas rapide à trois filets, températures d'utilisation 175 °C ou 200 °C continu - Partie 013 : Embase de repos - Norme de produit

Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Drei-gangige Gewinde-Schnellkupplung,Dauerbetriebstemperaturen 175 °C oder 200 °C - Teil 013: Blinddose - Produktnorm This European Standard was approved by CEN on 28 September 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36

B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-013:2007: ESIST EN 3645-013:2009

EN 3645-013:2007 (E) 2 Contents Page Foreword..............................................................................................................................................................3 1 Scope......................................................................................................................................................4 2 Normative references............................................................................................................................4 3 Terms and definitions...........................................................................................................................4 4 Required characteristics.......................................................................................................................5 5 Designation............................................................................................................................................8 6 Marking...................................................................................................................................................8 7 Technical specification.........................................................................................................................8

SIST EN 3645-013:2009

EN 3645-013:2007 (E) 3 Foreword This document (EN 3645-013:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.