SIST EN 13218:2003+A1:2008/AC:2008

Machine tools - Safety - Stationary grinding machines

This standard specifies the technical safety requirements and/or protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, arrangements for transport and maintenance) of stationary grinding machines as defined in 3.1 and 3.2 and intended to be used for the grinding of workpieces of cold metal. This standard deals with the significant hazards as listed in 4. This standard does not apply to honing, polishing and belt grinding machines. This standard applies to machines which are manufactured after the date of issue of this standard.

Werkzeugmaschinen - Sicherheit - Ortsfeste Schleifmaschinen

Machines-outils - Sécurité - Machines à meuler fixes

Obdelovalni stroji - Varnost - Stacionarni brusni stroji

Ta standard določa tehnične zahteve za varnost in/ali zaščitne ukrepe, ki jih morajo sprejeti osebe pri načrtovanju, izgradnji in dobavi (vključno z postavitvijo in razstavitvijo, ureditvijo transporta in vzdrževanjem) stacionarnih brusnih strojev, kot je določeno v točkah 3.1 in 3.2 ter namenjenim za uporabo pri brušenju obdelovanca iz hladne kovine. Ta standard obravnava velike nevarnostmi, kot so navedeno v točki 4. Ta standard ne velja za honanje, loščenje in tračne brusilnike. Ta standard velja za opremo, ki je bila izdelana po datumu izdaje tega standarda.

General Information

• Status: Withdrawn
• Publication Date: 02-Nov-2008
• Withdrawal Date: 13-May-2010
• ICS: 25.080.50 - Grinding and polishing machines
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-May-2010
• Due Date: 05-Jun-2010
• Completion Date: 14-May-2010
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 13218:2002+A1:2008/AC:2008 - Machine tools - Safety - Stationary grinding machines

Relations

• Corrects: SIST EN 13218:2003+A1:2008 - Machine tools - Safety - Stationary grinding machines
• Effective Date: 01-Dec-2008
• Replaced By: SIST EN ISO 16089:2016 - Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN 13218:2003+A1:2008/AC:2010 - Machine tools - Safety - Stationary grinding machines
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN 13218:2003+A1:2008/AC:2010 - Machine tools - Safety - Stationary grinding machines
• Effective Date: 01-Jul-2010
• Corrects: SIST EN 13218:2003+A1:2008 - Machine tools - Safety - Stationary grinding machines
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Obdelovalni stroji - Varnost - Stacionarni brusni strojiWerkzeugmaschinen - Sicherheit - Ortsfeste SchleifmaschinenMachines-outils - Sécurité - Machines à meuler fixesMachine tools - Safety - Stationary grinding machines25.080.50Brusilni in polirni strojiGrinding and polishing machinesICS:Ta slovenski standard je istoveten z:EN 13218:2002+A1:2008/AC:2008SIST EN 13218:2003+A1:2008/AC:2008en,de01-december-2008SIST EN 13218:2003+A1:2008/AC:2008SLOVENSKI
STANDARD



SIST EN 13218:2003+A1:2008/AC:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN13218:2002+A1:2008/ACOctober 2008Octobre 2008Oktober 2008ICS 25.080.50English versionVersion FrançaiseDeutsche FassungMachine tools - Safety - Stationary grinding machinesMachines-outils - Sécurité - Machines àmeuler fixesWerkzeugmaschinen - Sicherheit -Ortsfeste SchleifmaschinenThis corrigendum becomes effective on 22 October 2008 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 22 octobre 2008 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 22.Oktober 2008 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13218:2002+A1:2008/AC:2008 D/E/FSIST EN 13218:
...