iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 3042:2001

(Main)

Aerospace series - Quality assurance - EN aerospace products - Qualification procedure

Aerospace series - Quality assurance - EN aerospace products - Qualification procedure

This standard prescribes the qualification procedure for EN aerospace products. It is applicable in conjunction with EN 2000 whenever it is referenced in the EN standards.

Luft- und Raumfahrt - Qualitätssicherung - EN-Erzeugnisse der Luft- und Raumfahrt - Qualifikationsverfahren

Diese Norm legt das Qualifikationsverfahren fu"r EN-Erzeugnisse der Luft- und Raumfahrt fest. Sie ist in Zusammenhang mit EN 2000 anzuwenden, wenn in den EN-Normen auf sie Bezug genommen wird.

Série aérospatiale - Assurance qualité - Produits aérospatiaux EN - Procédure de qualification

La présente norme prescrit la procédure de qualification des produits aérospatiaux EN. Elle s'applique conjointement avec la norme EN 2000, chaque fois qu'elle est référencée dans les normes EN.

Aerospace series - Quality assurance - EN aerospace products - Qualification procedure

General Information

Status
Withdrawn
Publication Date
31-Dec-2000
Withdrawal Date
10-Feb-2009
ICS
03.120.10 - Quality management and quality assurance
49.020 - Aircraft and space vehicles in general
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Jan-2009
Due Date
08-Feb-2009
Completion Date
11-Feb-2009
Ref Project
EN 3042:1991 - Aerospace series - Quality assurance - EN aerospace products - Qualification procedure

Relations

Replaced By
SIST EN 9133:2005 - Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
Effective Date
01-Apr-2005

Buy Standard

EN 3042:2001EN 3042:2001
PreviousNext
Standard
EN 3042:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Quality assurance - EN aerospace products - Qualification procedureLuft- und Raumfahrt - Qualitätssicherung - EN-Erzeugnisse der Luft- und Raumfahrt - QualifikationsverfahrenSérie aérospatiale - Assurance qualité - Produits aérospatiaux EN - Procédure de qualificationAerospace series - Quality assurance - EN aerospace products - Qualifica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 9114:2023(Main)
Aerospace series - Quality systems - Direct Ship - Guidance for Aerospace Companies
EN 9114:2022

1.1   General
This document is limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process, the approved manufacturer is responsible for assurance that the article conforms to type design information.
1.2   Purpose
This document provides guidance to approved manufacturers, their suppliers, and customers when an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s purchase document directly to a customer, commonly known as “Direct Ship”.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9131:2020(Main)
Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
EN 9131:2020

1.1   Application:
This document defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g. engine, aircraft, spacecraft, helicopter), if specified by contract.
Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
1.2   Purpose:
The process of exchanging, coordinating, and approving nonconformity data via waiver/concession or product quality escape varies with the multiple relationships and agreements among all parties concerned. The information provided by this document forms architecture for submitting and managing data that allows for concise and accurate communication using various methods. The main objective of this document is to provide the definition of a data set that can be integrated into any form of communication (e.g. electronic data interchange, submission of conventional paper forms).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9130:2020(Main)
Aerospace series - Quality systems - Record retention
EN 9130:2020

This document provides requirements and guidance for the retention, storage, retrieval and disposal of
records for the international aviation, space and defense industry.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9138:2020(Main)
Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements
EN 9138:2019

This document establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of the EN 9100/EN 9110/EN 9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer. Application This standard is applicable when invoked in a purchasing contract or specification, contractual document, customer agreement, or adopted by the organization. The purchase contract/agreement may or may not identify the appropriate EN 9138 clause(s) to be applied by the organization. All statistical methods of product acceptance require the use of Clause 4 and Clause 5. To accept product produced: - by individual lots, see Clause 6; - under switching rules, see Clause 7; - under process controls, see Clause 8; and - by continuous sampling or special case methods, see Clause 9.

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9107:2019(Main)
Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies
EN 9107:2018

1.1   General
Limited to the commercial aerospace industry where a request is made for a PO to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organisation (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to approved design and airworthiness data. The PO is responsible to provide airworthiness release documentation.
1.2   Purpose
This document provides guidance to a PO and DO on how to comply with the DDA, including AA requirements per the applicable documents referenced in Clause 2 (see Figure 1).
(...)

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9115:2018(Main)
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)
EN 9115:2018

The requirements of EN 9100 apply with the following clarification for software.
This European standard supplements the EN 9100 standard requirements for deliverable software and
contains quality management system requirements for organizations that design, develop, and/or
produce deliverable software and services for the aviation, space, and defence industry. This includes,
as required, support software that is used in the development and maintenance of deliverable software
and services. The deliverable software may be stand-alone, embedded, mobile application, or loadable
into a target computer
This deliverable software may also be part of services (e.g., cloud environment, web hosted solutions or
platforms).
Where the use of Hardware Description Language (HDL) or high order language is utilized as the design
source of electronic hardware [e.g., Application Specific Integrated Circuit (ASIC), Programmable Logic
Device (PLD)]; the organization and customer, and/or supplier shall agree on the extent of applicability
of this supplement.
NOTE For airborne electronic hardware guidance, see RTCA/DO-254 or EUROCAE ED-80. For operations
requirements, see EN 9100, clause 8.
Where Commercial-Off-The-Shelf (COTS) or non-developmental software is integrated into a
deliverable product, the organization and customer shall agree on the extent of applicability of this
supplement.
For the purposes of this document, the terms “product” and “software product” are considered
synonymous.
For the purposes of this document, the term “services” may be considered a product.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9133:2018(Main)
Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
EN 9133:2018

This document defines a system for the qualification of standard products for aviation, space, and
defenc applications. It defines the principles that shall be adhered to when carrying out product
qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA
to confirm compliance is achieved and maintained, in accordance with the requirements of its product
definition and associated controlling technical specifications by an Original Component Manufacturer
(OCM) of standard products.
This document requires an OCM that has been granted product qualification approval to ensure
applicable approvals are maintained and renewed in accordance with the CA’s quality system for that
qualified product.
OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this
standard, shall as a prerequisite, maintain EN 9100 standard quality management system certification
approval. This certification shall be visible in the Online Aerospace Supplier Information System
(OASIS) database.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9110:2018(Main)
Quality Management Systems - Requirements for Aviation Maintenance Organizations
EN 9110:2018

This document includes EN ISO 9001:20152 quality management system requirements and
specifies additional civil and military aviation maintenance and continuing airworthiness industry
requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary (not
alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable
statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an
organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer
and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including
processes for improvement of the system and the assurance of conformity to customer and
applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any
organization, regardless of its type or size or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services
intended for or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9120:2018(Main)
Quality Management Systems - Requirements for Aviation, Space and Defence Distributors
EN 9120:2018

This document includes EN ISO 9001:20152 quality management system requirements and
specifies additional aviation, space and defence industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary (not
alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable
statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an
organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer
and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including
processes for improvement of the system and the assurance of conformity to customer and
applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any
organization, regardless of its type or size or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services
intended for or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9100:2018(Main)
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
EN 9100:2018

This document includes EN ISO 9001:20152 quality management system requirements and
specifies additional aviation, space and defence industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary
(not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable
statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an
organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer
and applicable statutory and regulatory requirements and
b) aims to enhance customer satisfaction through the effective application of the system, including
processes for improvement of the system and the assurance of conformity to customer and
applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any
organization, regardless of its type or size, or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services
intended for, or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    64 pages
    German language
    sale 10% off
    e-Library read for
    1 day