Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system

This European Standard specifies a five-figure numerical designation system for aluminium alloys and master alloys as specified in the relevant European Standards. It applies to ingots for remelting and to castings for all applications including aerospace.
A designation system for unalloyed aluminium is specified in prEN 576. An alternative numerical designation system is specified in prEN 1780-1. Writing rules for chemical composition are specified in prEN 1780-3.
An alternative chemical symbol based designation system is specified in prEN 1780-2. The writing rules for chemical composition are specified in prEN 1780-3.

Aluminium und Aluminiumlegierungen - Bezeichnung von legiertem Aluminium in Masseln, Vorlegierungen und Gussstücken - Teil 1: Numerisches Bezeichnungssystem

Dieser Teil von prEN 1780 legt ein aus fünf Ziffern bestehendes numerisches Bezeichnungssystem für Aluminiumlegierungen und Vorlegierungen fest. Ein Bezeichnungssystem für unlegiertes Aluminium ist in prEN 576 festgelegt. Er gilt für Masseln und Gußstücke für alle Anwendungsgebiete, einschließlich Luft- und Raumfahrt. Ein alternatives Bezeichnungssystem, basierend auf chemischen Symbolen, ist in prEN 1780-2 festgelegt. Schreibregeln für die chemische Zusammensetzung sind in prEN 1780-3 festgelegt.

Aluminium et alliages d'aluminium - Systeme de désignation applicable aux lingots pour refusion en aluminium allié, aux alliages-meres et aux produits moulés - Partie 1: Systeme de désignation numérique

Aluminij in aluminijeve zlitine – Označevanje nelegiranih in legiranih ingotov za pretaljevanje, za predzlitine in ulitke – 1. del: Sistem številčnega označevanja

General Information

Status
Published
Publication Date
31-Dec-2003
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2004
Due Date
01-Jan-2004
Completion Date
01-Jan-2004

Relations

Buy Standard

Standard
EN 1780-1:2004
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Bezeichnung von legiertem Aluminium in Masseln, Vorlegierungen und Gussstücken - Teil 1: Numerisches BezeichnungssystemAluminium et alliages d'aluminium - Systeme de désignation applicable aux lingots pour refusion en aluminium allié, aux alliages-meres et aux produits moulés - Partie 1: Systeme de désignation numériqueAluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1780-1:2002SIST EN 1780-1:2004en01-januar-2004SIST EN 1780-1:2004SLOVENSKI
STANDARDSIST EN 1780-1:19981DGRPHãþD



SIST EN 1780-1:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1780-1October 2002ICS 77.150.10Supersedes EN 1780-1:2002English versionAluminium and aluminium alloys - Designation of alloyedaluminium ingots for remelting, master alloys and castings - Part1: Numerical designation systemAluminium et alliages d'aluminium - Système dedésignation applicable aux lingots pour refusion enaluminium allié, aux alliages-mères et aux produits moulés- Partie 1: Système de désignation numériqueAluminium und Aluminiumlegierungen - Bezeichnung vonlegiertem Aluminium in Masseln, Vorlegierungen undGussstücken - Teil 1: Numerisches BezeichnungssystemThis European Standard was approved by CEN on 2 September 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1780-1:2002 ESIST EN 1780-1:2004



EN 1780-1:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Basis of codification.44Five-figure designation system.44.1Aluminium alloys ingot and castings.44.2Master alloys.6Bibliography.7SIST EN 1780-1:2004



EN 1780-1:2002 (E)3ForewordThis document (EN 1780-1:2002) has been prepared by Technical Committee CEN /TC 132, "Aluminium andaluminium alloys", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003.Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 1 "Liquid metal,unalloyed and alloyed ingots" to prepare the following standard:EN 1780-1, Aluminium and aluminium alloys – Designation of alloyed aluminium ingots for remelting, master alloysan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.