SIST EN 12574-1:2017

Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design

This part of EN 12574 specifies dimensions and requirements of stationary waste containers (in the text also called containers) without wheels or with wheels for positioning purposes only, with flat or dome lid(s) and capacities up to 10 000 l for trunnion, double trunnion or pocket lifting devices.

Stationäre Abfallsammelbehälter - Teil 1: Behälter mit einem Volumen bis 10 000 l mit Flach- oder Schiebedeckel(n), für Schüttungen mit Zapfenaufnahme, Doppelzapfenaufnahme oder Taschenaufnahme - Maße und Formgebung

Dieser Teil der Normenreihe EN 12574 legt Maße und Anforderungen an stationäre Abfallsammelbehälter (im Folgenden auch kurz Behälter genannt) ohne Räder oder mit Rädern, die ausschließlich der Positionierung dienen, mit Flach  oder Schiebedeckel(n) und einem Volumen bis 10 000 l für Schüttungen mit Zapfenaufnahme, Doppelzapfenaufnahme oder Taschenaufnahme fest.

Conteneurs fixes à déchets - Partie 1 : Conteneurs de capacité allant jusqu'à 10 000 l à couvercle(s) plat(s) ou bombé(s), pour lève-conteneurs à préhension par tourillons, double tourillon ou manchons - Dimensions et conception

La présente partie du prEN 12574 spécifie les dimensions et les exigences relatives aux conteneurs fixes à déchets (également appelés « conteneurs » dans le texte), sans roues ou avec roues pour le positionnement uniquement, à couvercle(s) plat(s) ou bombé(s), dont la capacité peut atteindre 10 000 l pour les lève conteneurs à préhension par tourillons, double tourillon ou manchons.

Nepremični zabojniki za odpadke - 1. del: Zabojniki s prostornino do 10 000 l z ravnim(-i) ali izbočenim(-i) pokrovom(-i) za iztresalnike s parom ali dvema paroma rok ali za iztresalnike z zatičem - Mere in oblika

Ta del standarda EN 12574 določa mere in zahteve nepremičnih zabojnikov za odpadke (v besedilu tudi zabojniki) s kolesci ali brez njih, ki se uporabljajo izključno za namene postavitve, z ravnim(-i) ali izbočenim(-i) pokrov(-i) in prostornino do 10.000 l za iztresalnike s parom ali dvema paroma rok ali za iztresalnike z zatičem.

General Information

• Status: Published
• Public Enquiry End Date: 29-Sep-2015
• Publication Date: 19-Feb-2017
• ICS: 13.030.40 - Installations and equipment for waste disposal and treatment
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Feb-2017
• Due Date: 16-Apr-2017
• Completion Date: 20-Feb-2017
• Ref Project: EN 12574-1:2017 - Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design

Relations

• Revised: SIST EN 12574-1:2006 - Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design
• Effective Date: 01-Sep-2015
• Replaces: SIST EN 12574-1:2006 - Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design
• Effective Date: 08-Feb-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12574-1:2017
01-april-2017
1DGRPHãþD
SIST EN 12574-1:2006
GRO]1HSUHPLþQL]DERMQLNL]DRGSDGNHGHO=DERMQLNLVSURVWRUQLQR
DOLGYHPDSDURPDUDYQLPLDOLL]ERþHQLPLSRNURYRPL]DL]WUHVDOQLNHVSDURP
URNDOL]DL]WUHVDOQLNH]]DWLþHP0HUHLQREOLND
Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or
dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and
design
Stationäre Abfallsammelbehälter - Teil 1: Behälter mit einem Volumen bis 10 000 l mit
Flach- oder Schiebedeckel(n), für Schüttungen mit Zapfenaufnahme,
Doppelzapfenaufnahme oder Taschenaufnahme - Maße und Formgebung
Conteneurs fixes à déchets - Partie 1 : Conteneurs de capacité allant jusqu'à 10 000 l à
couvercle(s) plat(s) ou bombé(s), pour lève-conteneurs à préhension par tourillons,
double tourillon ou manchons - Dimensions et conception
Ta slovenski standard je istoveten z: EN 12574-1:2017
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 12574-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12574-1:2017

---------------------- Page: 2 ----------------------

SIST EN 12574-1:2017


EN 12574-1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2017
EUROPÄISCHE NORM
ICS 13.030.40 Supersedes EN 12574-1:2006
English Version

Stationary waste containers - Part 1: Containers with a
capacity up to 10 000 l with flat or dome lid(s), for
trunnion, double trunnion or pocket lifting device -
Dimensions and design
Conteneurs fixes à déchets - Partie 1 : Conteneurs de Stationäre Abfallsammelbehälter - Teil 1: Behälter mit
capacité allant jusqu'à 10 000 l à couvercle(s) plat(s) einem Volumen bis 10 000 l mit Flach- oder
ou bombé(s), pour lève-conteneurs à préhension par Schiebedeckel(n), für Schüttungen mit
tourillons, double tourillon ou manchons - Dimensions Zapfenaufnahme, Doppelzapfenaufnahme oder
et conception Taschenaufnahme - Maße und Formgebung
This European Standard was approved by CEN on 21 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12574-1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12574-1:2017
EN 12574-1:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Volumes . 6
5 Dimensions and design . 7
6 Nominal load and total permissible mass . 7
7 Safety and health requirements . 7
8 Testing . 7
9 Marking . 8
10 Designation. 8
Annex A (informative) A–deviations . 23
Bibliography . 24

2

---------------------- Page: 4 ----------------------

SIST EN 12574-1:2017
EN 12574-1:2017 (E)
European foreword
This document (EN 12574-1:2017) has been prepared by Technical Committee CEN/TC 183 “Waste
management”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall
be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12574-1:2006.
This European Standard is one part of the series of standards EN 12574 about “Stationary waste
containers” comprising the following parts:
— Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double
trunnion or pocket lifting device — Dimensions and design;
— Part 2: Performance requirements and test methods;
— Part 3: Safety and health requirements;
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 12574-1:2017
EN 12574-1:2017 (E)
1 Scope
This part of EN 12574 specifies dimensions and requirements of stationary waste containers (in the
text also called containers) without wheels or with wheels for positioning purposes only, with flat or
dome lid(s) and capacities up to 10 000 l for trunnion, double trunnion or pocket lifting devices.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 1501-5, Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting
devices for refuse collection vehicles
EN 12574-2:2017, Stationary waste containers - Part 2: Performance requirements and test methods
EN 12574-3:2017, Stationary waste containers - Part 3: Safety and health requirements
EN 840-1:2012, Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity
up to 400 l for comb lifting devices - Dimensions and design
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
NOTE Terms for components of waste containers and lifting devices in three languages are given in Annex A
of EN 840–1:2012.
3.1
stationary waste container
appropriately designed container without wheels or fitted with them, for positioning empty containers
only, to temporarily store waste
3.2
lifting device
structure which picks-up, tilts and empties containers into the RCV (Refuse Collection Vehicle) and
returns the container to the ground
3.3
trunnion lifting device
lifting device in which the picking-up system of the RCV consists of a pair of arms with automatic
locking mechanism to fit the trunnion to retain the container during emptying
3.4
double trunnion lifting device
lifting device in which the picking-up system of the RCV consists of a pair of arms with automatic
locking mechanism to fit the trunnions and to retain the container during emptying
Note 1 to entry: The double trunnion picking-up system supports the torsional moment during the tilting
motion.
4

---------------------- Page: 6 ----------------------

SIST EN 12574-1:2017
EN 12574-1:2017 (E)
3.5
pocket lifting device
lifting device in which the picking-up system of the RCV consists of a pair of arms to fit the pockets
located on either side of the container
3.6
volume
total space inside the container when the lid is closed
3.6.1
nominal volume
volume of the waste container as declared by the manufacturer
3.6.2
usable volume
inside volume of the container that can be filled with waste
Note 1 to entry: The usable volume is based on specific application depending on the collected material and on
the shape of the cover. It corresponds to:
— the volume below the filling apertures, in case of special filling apertures
— the volume of the tank, in case of collection of liquid material or in case of customer request
— the total space inside the container when the lid is closed
3.7
nominal load
load, which is calculated by density values of material multiplied by the nominal volume (3.6.1)
Note 1 to entry: Clause 6
3.8
total permissible mass
nominal load plus the dead mass of the container including all attached components lifted together
3.9
capacity
for the purpose of this standard volume and capacity are deemed to be the same
3.10
interface for trunnion lifting device
distance at the base of the trunnion where it meets the container
Note 1 to entry: see dimension number 13 in Figure 1
3.10.1
wide interface
interface for trunnion lifting device of (1 760 ± 10) mm
3.10.2
narrow interface
+20
interface for trunnion lifting device of ( 1 260) mm
−10
5

---------------------- Page: 7 ----------------------

SIST EN 12574-1:2017
EN 12574-1:2017 (E)
3.11
interface for pocket lifting device
distance between the two lateral boxes stopping the arms before lifting phase
3.11.1
wide interface
interface for pocket lifting device of (1 820 ± 15) mm
3.11.2
medium interface
interface for pocket lifting device of (1 710 ± 15) mm
3.11.3
narrow interface
interface for pocket lifting device of (1 600 ± 15) mm
3.12
disabled access
specific ergonomic devices and/or solutions in the waste containers to facilitate access by disabled
persons
3.13
lid
set of parts closing the top of the body of a waste container including one or more flaps, and including
all the related components
3.14
locked lid
lid which is closed so that it cannot be opened manually by a single person; this locked lid is usually
opened by a vehicle refuse collection vehicle during emptying operations
3.15
access flap
part of the lid which is opened for waste introduction
3.16
hinged access flap
flap that can be opened for waste introduction by a rotation around a hinge axle which is part of the lid
Note 1 to entry: See an example in Figure 4, type 4, with hinged lid open and tilted cover.
3.17
sliding flap
flap that can be opened only by a sliding movement
3.18
locked flap
part of the lid carrying filling aperture(s) or mechatronics device(s) which it is not opened for waste
introduction
4 Volumes
The nominal volume of the containers shall be up to 10 000 l (see Tables 1, 2, 3, 4 and 5). The tolerance
on nominal volume is ± 5 %. For measuring methods of volume, see EN 12574-2:2017.
6

---------------------- Page: 8 ----------------------

SIST EN 12574-1:2017
EN 12574-1:2017 (E)
5 Dimensions and design
5.1 The design of the containers need not correspond strictly to the drawings g
...