SIST EN ISO 6926:2016/A1:2021
(Amendment)Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels - Amendment 1 (ISO 6926:2016/Amd 1:2020)
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels - Amendment 1 (ISO 6926:2016/Amd 1:2020)
Akustik - Anforderungen an die Eigenschaften und die Kalibrierung von Vergleichsschallquellen für die Bestimmung von Schallleistungspegeln - Änderung 1 (ISO 6926:2016/Amd 1:2020)
No scope available
Acoustique - Prescriptions relatives aux performances et à l'étalonnage des sources sonores de référence pour la détermination des niveaux de puissance acoustique - Amendement 1 (ISO 6926:2016/Amd 1:2020)
Akustika - Zahteve za lastnosti in umerjanje referenčnih virov zvoka pri ugotavljanju ravni zvočnih moči - Dopolnilo A1 (ISO 6926:2016/Amd 1:2020)
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6926:2016/A1:2021
01-januar-2021
Akustika - Zahteve za lastnosti in umerjanje referenčnih virov zvoka pri
ugotavljanju ravni zvočnih moči - Dopolnilo A1 (ISO 6926:2016/Amd 1:2020)
Acoustics - Requirements for the performance and calibration of reference sound
sources used for the determination of sound power levels - Amendment 1 (ISO
6926:2016/Amd 1:2020)
Akustik - Anforderungen an die Eigenschaften und die Kalibrierung von
Vergleichsschallquellen für die Bestimmung von Schallleistungspegeln - Änderung 1
(ISO 6926:2016/Amd 1:2020)
Acoustique - Prescriptions relatives aux performances et à l'étalonnage des sources
sonores de référence pour la détermination des niveaux de puissance acoustique -
Amendement 1 (ISO 6926:2016/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 6926:2016/A1:2020
ICS:
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
SIST EN ISO 6926:2016/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6926:2016/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 6926:2016/A1:2021
EN ISO 6926:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 17.140.01
English Version
Acoustics - Requirements for the performance and
calibration of reference sound sources used for the
determination of sound power levels - Amendment 1 (ISO
6926:2016/Amd 1:2020)
Acoustique - Prescriptions relatives aux performances Akustik - Anforderungen an die Eigenschaften und die
et à l'étalonnage des sources sonores de référence pour Kalibrierung von Vergleichsschallquellen für die
la détermination des niveaux de puissance acoustique - Bestimmung von Schallleistungspegeln - Änderung 1
Amendement 1 (ISO 6926:2016/Amd 1:2020) (ISO 6926:2016/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 6926:2016; it was approved by CEN on 28 November 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6926:2016/A1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6926:2016/A1:2021
EN ISO 6926:2016/A1:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6926:2016/A1:2021
EN ISO 6926:2016/A1:2020 (E)
European foreword
This document (EN ISO 6926:2016/A1:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This Amendment to the European Standard EN ISO 6926:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 6926:2016/Amd 1:2020 has been approved by CEN as EN ISO 6926:2016/A1:2020
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6926:2016/A1:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 6926:2016/A
...
SLOVENSKI STANDARD
SIST EN ISO 6926:2016/A1:2021
01-januar-2021
Akustika - Zahteve za lastnosti in umerjanje referenčnih virov zvoka pri
ugotavljanju ravni zvočnih moči - Dopolnilo A1 (ISO 6926:2016/Amd 1:2020)
Acoustics - Requirements for the performance and calibration of reference sound
sources used for the determination of sound power levels - Amendment 1 (ISO
6926:2016/Amd 1:2020)
Akustik - Anforderungen an die Eigenschaften und die Kalibrierung von
Vergleichsschallquellen für die Bestimmung von Schallleistungspegeln - Änderung 1
(ISO 6926:2016/Amd 1:2020)
Acoustique - Prescriptions relatives aux performances et à l'étalonnage des sources
sonores de référence pour la détermination des niveaux de puissance acoustique -
Amendement 1 (ISO 6926:2016/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 6926:2016/A1:2020
ICS:
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
SIST EN ISO 6926:2016/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6926:2016/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 6926:2016/A1:2021
EN ISO 6926:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 17.140.01
English Version
Acoustics - Requirements for the performance and
calibration of reference sound sources used for the
determination of sound power levels - Amendment 1 (ISO
6926:2016/Amd 1:2020)
Acoustique - Prescriptions relatives aux performances Akustik - Anforderungen an die Eigenschaften und die
et à l'étalonnage des sources sonores de référence pour Kalibrierung von Vergleichsschallquellen für die
la détermination des niveaux de puissance acoustique - Bestimmung von Schallleistungspegeln - Änderung 1
Amendement 1 (ISO 6926:2016/Amd 1:2020) (ISO 6926:2016/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 6926:2016; it was approved by CEN on 28 November 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6926:2016/A1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6926:2016/A1:2021
EN ISO 6926:2016/A1:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6926:2016/A1:2021
EN ISO 6926:2016/A1:2020 (E)
European foreword
This document (EN ISO 6926:2016/A1:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This Amendment to the European Standard EN ISO 6926:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 6926:2016/Amd 1:2020 has been approved by CEN as EN ISO 6926:2016/A1:2020
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6926:2016/A1:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 6926:2016/A
...
SLOVENSKI STANDARD
SIST EN ISO 6926:2016/oprA1:2020
01-januar-2020
Akustika - Zahteve za lastnosti in umerjanje referenčnih virov zvoka pri
ugotavljanju ravni zvočnih moči - Dopolnilo A1 (ISO 6926:2016/DAM 1:2019)
Acoustics - Requirements for the performance and calibration of reference sound
sources used for the determination of sound power levels - Amendment 1
Akustik - Anforderungen an die Eigenschaften und die Kalibrierung von
Vergleichsschallquellen für die Bestimmung von Schallleistungspegeln - Änderung 1
Acoustique - Prescriptions relatives aux performances et à l'étalonnage des sources
sonores de référence pour la détermination des niveaux de puissance acoustique -
Amendement 1
Ta slovenski standard je istoveten z: EN ISO 6926:2016/prA1
ICS:
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
SIST EN ISO 6926:2016/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6926:2016/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 6926:2016/oprA1:2020
DRAFT AMENDMENT
ISO 6926:2016/DAM 1
ISO/TC 43/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-10-16 2020-01-08
Acoustics — Requirements for the performance and
calibration of reference sound sources used for the
determination of sound power levels
AMENDMENT 1
Acoustique — Prescriptions relatives aux performances et à l'étalonnage des sources sonores de référence
pour la détermination des niveaux de puissance acoustique
AMENDEMENT 1
ICS: 17.140.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 6926:2016/DAM 1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
SIST EN ISO 6926:2016/oprA1:2020
ISO 6926:2016/DAM 1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 6926:2016/oprA1:2020
ISO 6926:2016/DAM 1:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborate
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.