SIST EN 1125:1998/A1:2002

Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods

This European Standard specifies requirements for the manufacture, performance and testing of panic devices mechanically operated by either a horizontal push-bar or a horizontal touch-bar specifically designed for use in a panic situation. This European Standard does not specify any particular design of panic device and only such dimensions as are required for safety reasons are specified. This European Standard does not cover specific devices intended for use by the severely disabled. Due to the wide range of disabilities, such devices and their performances should be agreed between specifier and manufacturer.

Schlösser und Baubeschläge - Paniktürverschlüsse mit horizontaler Betätigungsstange für Türen in Rettungswegen - Anforderungen und Prüfverfahren

Quincaillerie pour le bâtiment - Fermetures anti-panique pour issues de secours manoeuvrées par une barre horizontale - Prescriptions et méthodes d'essai

Ključavnice in stavbno okovje - Zapore z vodoravnim potisnim drogom za izhod ob paniki - Zahteve in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2002
• Withdrawal Date: 10-Mar-2008
• ICS: 91.190 - Building accessories
• Technical Committee: ISTP - Doors and windows
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-Mar-2008
• Due Date: 02-Apr-2008
• Completion Date: 11-Mar-2008
• Directive: 89/106/EEC - Construction products
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Ref Project: EN 1125:1997/A1:2001 - Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods

Relations

• Replaced By: SIST EN 1125:2008 - Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
• Effective Date: 01-May-2008
• Amends: SIST EN 1125:1998 - Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
• Effective Date: 22-Dec-2008
• Corrected By: SIST EN 1125:1998/A1:2002/AC:2002 - Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1125:1998/A1:2002
01-julij-2002
.OMXþDYQLFHLQVWDYEQRRNRYMH=DSRUH]YRGRUDYQLPSRWLVQLPGURJRP]DL]KRGRE
SDQLNL=DKWHYHLQSUHVNXVQHPHWRGH
Building hardware - Panic exit devices operated by a horizontal bar - Requirements and
test methods
Schlösser und Baubeschläge - Paniktürverschlüsse mit horizontaler Betätigungsstange
für Türen in Rettungswegen - Anforderungen und Prüfverfahren
Quincaillerie pour le bâtiment - Fermetures anti-panique pour issues de secours
manoeuvrées par une barre horizontale - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: EN 1125:1997/A1:2001
ICS:
91.190
SIST EN 1125:1998/A1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 1125:1997/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 91.190
English version
Building hardware - Panic exit devices operated by a horizontal
bar - Requirements and test methods
Quincaillerie pour le bâtiment - Fermetures anti-panique Schlösser und Baubeschläge - Paniktürverschlüsse mit
pour issues de secours manoeuvrées par une barre horizontaler Betätigungsstange für Türen in Rettungswegen
horizontale - Prescriptions et méthodes d'essai - Anforderungen und Prüfverfahren
This amendment A1 modifies the European Standard EN 1125:1997; it was approved by CEN on 3 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1125:1997/A1:2001 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

Page 2
EN 1125:1997/A1:2001
Foreword
This Amendment EN 1125:1997/A1:2001 to the EN 1125:1997 has been prepared by Technical
Committee CEN/TC 33 "Doors, windows, shutters, building hardware and curtain walling", the
secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 1125:1997 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2001,
and conflicting national standards shall be withdrawn at the latest by March 2003.
This Amendment to the European Standard EN 1125:1997 has been prepared under a mandate given
to CEN by the European Commission and the European Free Trade Association, and supports
essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this
standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

---------------------- Page: 3 ----------------------

Page 3
EN 1125:1997/A1:2001
Foreword
Add paragraph after existing fifth paragraph “ Wherever reference is made to classes, they are
considered to be technical classes and not classes according to Article 3(2) of the Construction
Products Directive (89/106/EEC).”
------------------------------------------------------------------------------------------------------------------------------------
Contents
Replace heading of item 9 with “Evaluation of conformity”
Replace heading of Annex ZA with “(informative) Clauses adressing the provisions of the EU
Construction Products Directive (89/106/EEC)”.

---------------------- Page: 4 ----------------------

Page 4
EN 1125:1997/A1:2001
------------------------------------------------------------------------------------------------------------------------------------
Change
4.1.19 as follows :
“4.1.19 The design of a panic exit device shall include the protection indicated in 4.1.7 and also
socket(s) and/or keeper (s) for engaging the bolt (s) head…”
Change

...