iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1537:2002

(Main)

Execution of special geotechnical work - Ground anchors

Execution of special geotechnical work - Ground anchors

This Standard is applicable to the installation, testing and monitoring of permanent and temporary ground anchors where the load capacity is tested. An anchor consists of an anchor head, a free anchor length and a fixed anchor length which is bonded to the ground by grout. The term "ground" is taken to encompass both soil and rock.

Ausführung von besonderen geotechnischen Arbeiten (Spezialtiefbau) - Verpreßanker

Diese Norm gilt für den Einbau, die Prüfung und die Überwachung von Dauer- und Kurzzeitankern, deren Bruchkraft geprüft wird. Ein Anker besteht aus einem Ankerkopf, einer freien Ankerlänge und einer Krafteintragungslänge, die mit dem Baugrund durch Verpreßmörtel verbunden ist. Die Bezeichnung "Baugrund" beinhaltet sowohl Boden als auch Fels.

Exécution des travaux géotechniques spéciaux - Tirant d'ancrage

La présente norme s'applique a la mise en place, aux essais et au contrôle des tirants d'ancrage permanents et provisoires lorsque la capacité d'ancrage est testée. Un tirant d'ancrage comporte trois parties, la tete d'ancrage, la partie libre et la partie scellée au terrain par injection. Le terme "terrain" englobe a la fois les sols et les roches.

Izvedba posebnih geotehničnih del - Geotehnična sidra

General Information

Status
Withdrawn
Publication Date
30-Jun-2002
Withdrawal Date
28-Oct-2013
ICS
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
KON - Structures
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Oct-2013
Due Date
20-Nov-2013
Completion Date
29-Oct-2013
Ref Project
EN 1537:1999 - Execution of special geotechnical work - Ground anchors

Relations

Replaced By
SIST EN 1537:2013 - Execution of special geotechnical work - Ground anchors
Effective Date
01-Dec-2013
Corrected By
SIST EN 1537:2002/AC:2004 - Execution of special geotechnical work - Ground anchors
Effective Date
22-Dec-2008
Replaced By
SIST EN 1537:2013 - Execution of special geotechnical work - Ground anchors
Effective Date
08-Jun-2022
Corrected By
SIST EN 1537:2002/AC:2004 - Execution of special geotechnical work - Ground anchors
Effective Date
08-Jun-2022

Buy Standard

EN 1537:2002EN 1537:2002
PreviousNext
Standard
EN 1537:2002
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ausführung von besonderen geotechnischen Arbeiten (Spezialtiefbau) - VerpreßankerExécution des travaux géotechniques spéciaux - Tirant d'ancrageExecution of special geotechnical work - Ground anchors93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground worksICS:Ta slovenski standard je istoveten z:EN 1537:1999SIST EN 1537:2002en01-julij-2002SIST EN 1537:2002SLOVENSKI
STANDARD



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1537:2002



SIST EN 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 22476-5:2023(Main)
Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test (ISO 22476-5:2023)
EN ISO 22476-5:2023

This document is applicable to pressuremeter tests using cylindrical flexible probes placed in pre-existent boreholes using testing procedures other than the Menard procedure.
Pressuremeter tests following the Menard procedure are provided in ISO 22476-4.
NOTE          A high-pressure flexible pressuremeter probe which contains transducers for the measurement of radial displacements is also known as flexible dilatometer probe or high-pressure dilatometer probe.
This document applies to tests performed in any kind of grounds, starting from soils, treated or untreated fills, hard soils and soft rocks, up to hard and very hard rocks, either on land or offshore.
The parameters derived from this test can include stiffness, strength, initial in-situ stress state and consolidation properties.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-1:2015/A1:2022(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/Amd 1:2022)
EN ISO 17892-1:2014/A1:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-12:2018/A2:2022(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 2 (ISO 17892-12:2018/Amd 2:2022)
EN ISO 17892-12:2018/A2:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 24283-2:2022(Main)
Geotechnical investigation and testing - Qualification criteria and assessment - Part 2: Responsible expert (ISO/TS 24283-2:2022)
CEN ISO/TS 24283-2:2022

This document specifies the qualification criteria for persons who are responsible for the performance of sampling, testing, measuring, monitoring and installation of equipment (e.g. piezometers, borehole heat exchangers, inclinometers and extensometers) in the framework of geotechnical investigation.

  • Technical specification
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 24283-3:2022(Main)
Geotechnical investigation and testing - Qualification criteria and assessment - Part 3: Qualified enterprise (ISO/TS 24283-3:2022)
CEN ISO/TS 24283-3:2022

This document specifies the qualification criteria for enterprises performing sampling, testing, measuring, monitoring and installation of equipment (e.g. piezometers, borehole heat exchangers, inclinometers and extensometers) in the framework of geotechnical investigation.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 24283-1:2022(Main)
Geotechnical investigation and testing - Qualification criteria and assessment - Part 1: Qualified technician and qualified operator (ISO/TS 24283-1:2022)
CEN ISO/TS 24283-1:2022

This document specifies the qualification criteria for persons performing sampling, testing, measuring, monitoring and installation of equipment (e.g. piezometers, borehole heat exchangers, inclinometers and extensometers) in the framework of geotechnical investigation.

  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-1:2005/A1:2014(Amendment)
Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-1:2004/A1:2013

(1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works.
(2) The following subjects are dealt with in EN 1997-1:
Section 1: General
Section 2: Basis of geotechnical design
Section 3: Geotechnical data
Section 4: Supervision of construction, monitoring and maintenance
Section 5: Fill, dewatering, ground improvement and reinforcement
Section 6: Spread foundations
Section 7: Pile foundations
Section 8: Anchorages
Section 9: Retaining structures
Section 10: Hydraulic failure
Section 11: Overall stability
Section 12: Embankments
(3) EN 1997-1 is accompanied by Annexes A to J, which provide:
- in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex;
- in B to J: supplementary informative guidance such as internationally applied calculation methods.

  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14490:2010(Main)
Execution of special geotechnical works - Soil nailing
EN 14490:2010

This European Standard establishes general principles for the execution, testing, supervision and monitoring of soil nailing. Soil nailing is a construction technique, used to enhance/maintain the stability of a soil mass by installation of reinforcing elements (soil nails). The scope of soil nailing applications considered in this European Standard includes the installation and testing of soil nails and associated operations, required when stabilising existing and newly cut slopes and faces in soil, existing earth retaining structures, embankments, existing tunnels and the excavated facing of new tunnels in soil. Soil nailing may be used to form part of a hybrid construction. This European Standard is relevant only to the soil nailing aspect of such constructions. Techniques, such as reinforcement of ground by vertical inclusions (sheet piles, bored or driven piles, or other elements) and stabilisation with rock bolts, prestressed ground anchors or tensions piles are not covered by this European Standard.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1997-2:2007/AC:2010(Corrigendum)
Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
EN 1997-2:2007/AC:2010

TC - Modifications in the English mother reference version to the Table of Contents, Clauses 1, 4, 5 and Annexes A, B, D, E, F, I, J, K and X.

  • Corrigendum
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22476-12:2009
Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPT) (ISO 22476-12:2009)
EN ISO 22476-12:2009

This part of ISO 22476 specifies a mechanical cone penetration test (CPTM), including equipment requirements, execution and reporting. The results from such geotechnical testing are especially suited to the qualitative and/or quantitative determination of a soil profile - together with direct investigations - or as a relative comparison with other in situ tests. The results from a cone penetration test can in principle be used to evaluate stratification, soil type, and geotechnical parameters such as soil density, shear-strength parameters and deformation and consolidation characteristics. This part of ISO 22476 specifies the following features: - type of cone penetration test (see Table 1); - application class (see Table 2); - penetration length or penetration depth; - elevation of the ground surface or underwater ground surface at the location of the cone penetration test with reference to a datum; - location of the cone penetration test relative to a reproducible fixed location reference point.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day