Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard

This document specifies the required characteristics, tests and tooling applicable to female electrical quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in EN 3155 074.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 075: Elektrische quadraxiale Buchsenkontakte, Größe 8, Typ E, crimpbar, Klasse R - Produktnorm

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 075: Contacts électriques, quadrax, taille 8, femelles, type E, à sertir, classe R - Norme de produit

Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques quadrax femelles, blindés, de taille 8, de type E, d’impédance caractéristique de 100 Ω, à sertir, de classe R, utilisés dans les organes de connexion suivant l’EN 3155 002.
Il est utilisé conjointement avec l’EN 3155 001.
Les contacts mâles associés sont spécifiés dans l’EN 3155 074.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 075. del: Kontakti, električni, quadrax, velikost 8, ženski, tip E, nagubani, razred R - Standard za proizvod

General Information

Status
Not Published
Public Enquiry End Date
19-Sep-2023
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Jul-2023
Due Date
23-Nov-2023

Relations

Buy Standard

Draft
prEN 3155-075:2023
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3155-075:2023
01-september-2023
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 075. del:
Kontakti, električni, quadrax, velikost 8, ženski, tip E, nagubani, razred R -
Standard za proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 075:
Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 075: Elektrische quadraxiale Buchsenkontakte, Größe 8, Typ E, crimpbar, Klasse R
- Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
075: Contacts électriques, quadrax, taille 8, femelles, type E, à sertir, classe R - Norme
de produit
Ta slovenski standard je istoveten z: prEN 3155-075
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3155-075:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3155-075:2023

---------------------- Page: 2 ----------------------
oSIST prEN 3155-075:2023


DRAFT
EUROPEAN STANDARD
prEN 3155-075
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2023
ICS 49.060 Will supersede EN 3155-075:2022
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 075: Contacts, electrical, quadrax, size 8,
female, type E, crimp, class R - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 075: Contacts Verwendung in Verbindungselementen - Teil 075:
électriques, quadrax, taille 8, femelles, type E, à sertir, Elektrische quadraxiale Buchsenkontakte, Größe 8,
classe R - Norme de produit Typ E, crimpbar, Klasse R - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3155-075:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3155-075:2023
prEN 3155-075:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Specific characteristics . 5
4.2 Dimensions and mass . 5
4.3 Marking . 6
4.3.1 Marking . 6
4.3.2 Pin location identification . 6
4.4 Material, surface treatment . 7
4.4.1 Material . 7
4.4.2 Protective coating . 7
4.4.3 Dielectric . 7
4.5 Permissible cables . 7
4.6 Wiring . 8
4.7 Tools . 9
4.8 Tests . 9
4.9 Gauge . 13
4.10 Connectors for qualification tests . 14
5 Designation . 14
6 Marking . 14
7 Technical specification . 14
Bibliography . 15

2

---------------------- Page: 4 ----------------------
oSIST prEN 3155-075:2023
prEN 3155-075:2023 (E)
European foreword
This document (prEN 3155-075:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3155-075:2022.
prEN 3155-075:2023 includes the following significant technical changes with respect to
EN 3155-075:2022:
— normative references updated;
— alternative design and view for female contact authorizing hood on front area side introduced;
— test sequence updated to ensure performance measurements of insertion loss (EN 2591-222) and
impedance characteristic (EN 2591-223) tests;
— document editorially revised.
3

---------------------- Page: 5 ----------------------
oSIST prEN 3155-075:2023
prEN 3155-075:2023 (E)
1 Scope
This document specifies the required characteristics, tests and tooling applicable to female electrical
quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in elements
of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-074.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical
Specification
EN 3375-008, Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star
Quad 100 ohms - Type KD - Product standard
EN 3375-011, Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star
Quad 100 ohms - Lightweight - Type KL - Product standard
EN 3375-012, Aerospace series - Cable, electrical, for digital data transmission - Part 012: Single braid - Star
Quad 100 ohms - 260 °C - Type KH - Product standard
EN 3645-001, Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling,
operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
EN 3909, Aerospace series - Test fluids and test methods for electrical and optical components and sub-
assemblies
1
SAE AS22520, Crimping Tools, Wire Termination, General Specification For
SAE AS81969/14A, Installing and Removal Tools, Connector Electrical Contact, Type III, Class 2,
1
Composition B
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3155-001 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/

1
Published by: SAE International (US) Society of Automotive Engineers, https://www.sae.org/.
4

---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.