SIST ISO 567:1998

Coke -- Determination of bulk density in a small container

Cancels and replaces the first edition (1974). Specifies a method for the determination of the bulk density of coke in a cubical container of capacity of 0,2 m^3. Applicable to coke with a nominal top size not greater than 125 mm.

Coke -- Détermination de la masse volumique en vrac dans un récipient de petites dimensions

Koks - Določanje nasipne gostote v majhni posodi

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-1998
• Withdrawal Date: 02-Feb-2022
• ICS: 75.160.10 - Solid fuels
• Technical Committee: IRUD - Mining
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Feb-2022
• Due Date: 26-Feb-2022
• Completion Date: 03-Feb-2022
• Ref Project: ISO 567:1995 - Coke — Determination of bulk density in a small container

Relations

• Revised: ISO 567:1974 - Coke — Determination of the bulk density in a small container
• Effective Date: 12-May-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Coke -- Détermination de la masse volumique en vrac dans un récipient de petites dimensionsCoke -- Determination of bulk density in a small container75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:ISO 567:1995SIST ISO 567:1998en01-februar-1998SIST ISO 567:1998SLOVENSKI
STANDARD



SIST ISO 567:1998



INTERNATIONAL STANDARD ISO 567 Second edition 1995-07-01 Coke - Determination of bulk density in a small Container Coke - Dktermina tion de Ia masse volumique en vr-ac dans un rhcipien t de petites dimensions Reference number ISO 567: 1995(E) SIST ISO 567:1998



ISO 567:1995(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing international Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 567 was prepared by Technical Committee lSO/TC 27, Solid mineral fuels, Subcommittee SC 3, Coke. This second edition cancels and replaces the first edition (ISO 567:1974), which has been technically revised. 0 ISO 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-l 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST ISO 567:1998



0 ISO ISO 567:1995(E) Introduction The bulk density of coke depends upon its physical characteristics, e.g. apparent relative density, shape and size of the coke particles, and upon the dimensions of the Container. The Container specified in this Inter- national Standard has a capacity of 0,2 m3. The determination of bulk density of coke in a large Container is described in ISO 1013. . . . Ill SIST ISO 567:1998



This page intentionally left blank SIST ISO 567:1998



INTERNATIONAL STANDARD 0 ISO ISO 567:1995(E) Coke - Determination of bulk density in a small Container 1 Scope This International Standard specifies a method for the determination of the bulk density of coke in a cubical Container of capacity 0,2 m3. lt is applicable to coke with a nominal top size not greater than 125 mm. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most re- cent editions of
...

INTERNATIONAL ISO
567
STANDARD
Second edition
1995-07-01
Coke - Determination of bulk density in a
small Container
- Dktermina tion de Ia masse volumique en vr-ac dans un rhcipien t
Coke
de petites dimensions
Reference number
ISO 567: 1995(E)

---------------------- Page: 1 ----------------------
ISO 567:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing international Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 567 was prepared by Technical Committee
lSO/TC 27, Solid mineral fuels, Subcommittee SC 3, Coke.
This second edition cancels and replaces the first edition (ISO 567:1974),
which has been technically revised.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
0 ISO
ISO 567:1995(E)
Introduction
The bulk density of coke depends upon its physical characteristics, e.g.
apparent relative density, shape and size of the coke particles, and upon
the dimensions of the Container. The Container specified in this Inter-
national Standard has a capacity of 0,2 m3. The determination of bulk
density of coke in a large Container is described in ISO 1013.
. . .
Ill

---------------------- Page: 3 ----------------------
This page intentionally left blank

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD 0 ISO ISO 567:1995(E)
- Determination of bulk density in a small
Coke
Container
4 Principle
1 Scope
This International Standard specifies a method for the A weighed Container of known volume is filled with
coke and the increase in mass is determined.
determination of the bulk density of coke in a cubical
Container of capacity 0,2 m3. lt is applicable to coke
with a nominal top size not greater than 125 mm.
5 Apparatus
5.1 Cubical Container, of capacity 0,200 m3 and
2 Normative references
internal dimension 585 mm, with a smooth inner sur-
face, rigidly constructed and fitted with handles.
The following Standards contain provisions which,
through reference in this text, constitute provisions
5.2 Weighing machine, preferably of the platform
of this International Standard. At the time of publi-
type, of maximum capacity 300 kg and sufficiently
cation, the editions indicated were valid. All Standards
accurate that the weighing error does not exceed
are subject to revision, and Parties to agreements
0,l % of the maximum load or 250 g, whi
...