SIST EN 302 064 V2.2.1:2024

Wireless Digital Video Links operating in the 1,3 GHz to 50 GHz frequency band - Harmonised Standard for access to radio spectrum

The present document applies to terrestrial wireless digital video link equipment operating in the frequency band
1,3 GHz to 50 GHz. The present document does not apply to transmitter equipment where the output power exceeds
10 W. Equipment with an integral antenna is also excluded.
NOTE: The relationship between the present document and essential requirements of article 3.2 of
Directive 2014/53/EU [i.1] is given in annex A.

Brezžične digitalne video povezave, ki delujejo v frekvenčnem pasu od 1,3 GHz do 50 GHz - Harmonizirani standard za dostop do radijskega spektra

Ta dokument se uporablja za prizemno opremo z brezžično digitalno video povezavo, ki deluje v frekvenčnem pasu od 1,3 GHz do 50 GHz. Ta dokument se ne uporablja za oddajniško opremo z izhodno močjo, večjo od 10 W. Oprema z vgrajeno anteno je prav tako izključena.
OPOMBA: Razmerje med tem dokumentom in bistvenimi zahtevami iz člena 3.2
Direktive 2014/53/EU [i.1] je podano v dodatku A.

General Information

• Status: Published
• Public Enquiry End Date: 30-Sep-2024
• Publication Date: 05-Nov-2024
• ICS: 33.160.40 - Video systems
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Nov-2024
• Due Date: 09-Jan-2025
• Completion Date: 06-Nov-2024
• Ref Project: ETSI EN 302 064 V2.2.1 (2024-10) - Wireless Digital Video Links operating in the 1,3 GHz to 50 GHz frequency band; Harmonised Standard for access to radio spectrum

Standards Content (Sample)

Draft ETSI EN 302 064 V2.1.3 (2024-07)

HARMONISED EUROPEAN STANDARD
Wireless Digital Video Links operating
in the 1,3 GHz to 50 GHz frequency band;
Harmonised Standard for access to radio spectrum

2 Draft ETSI EN 302 064 V2.1.3 (2024-07)

Reference
REN/ERM-TG17-160
Keywords
digital, harmonised standard, radio, regulation,
video
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
https://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 Draft ETSI EN 302 064 V2.1.3 (2024-07)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements for transmitters . 11
4.2.1 Transmitter emission classification . 11
4.2.2 Transmitter test signal configurations . 12
4.2.3 Transmitter power accuracy . 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter frequency stability . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Transmitter occupied bandwidth . 13
4.2.5.1 Definitions . 13
4.2.5.2 Limits . 13
4.2.5.3 Conformance . 13
4.2.6 Transmitter channel occupancy . 13
4.2.6.1 Definitions . 13
4.2.6.2 Limits . 13
4.2.6.3 Conformance . 14
4.2.7 Transmitter unwanted emissions in the spurious domain . 14
4.2.7.1 Definition . 14
4.2.7.2 Limits . 14
4.2.7.3 Conformance . 14
4.2.8 Transmitter unwanted emissions in the out of band domain . 15
4.2.8.1 Definition . 15
4.2.8.2 Limits . 15
4.2.8.3 Conformance . 15
4.3 Conformance requirements for receivers . 15
4.3.1 Receiver test signal configurations . 15
4.3.2 Minimum performance criterion . 15
4.3.3 Receiver sensitivity . 16
4.3.3.1 Definition . 16
4.3.3.2 Limits . 16
4.3.3.3 Conformance . 19
4.3.4 Receiver adjacent channel selectivity . 19
4.3.4.1 Definition . 19
4.3.4.2 Limit . 20
4.3.4.3 Conformance . 20
4.3.5 Receiver blocking . 20
4.3.5.1 Definition . 20
ETSI
4 Draft ETSI EN 302 064 V2.1.3 (2024-07)
4.3.5.2 Limit . 20
4.3.5.3 Conformance . 21
4.3.6 Receiver spurious emissions . 21
4.3.6.1 Definition . 21
4.3.6.2 Limits . 21
4.3.6.3 Conformance . 21
5 Testing for compliance with technical requirements . 22
5.1 Environmental conditions for testing . 22
5.2 Method of measurement for transmitters . 22
5.2.1 Generic measurement setup for transmitters . 22
5.2.2 Transmitter power accuracy . 22
5.2.2.1 Test conditions . 22
5.2.2.2 Test method . 22
5.2.3 Transmitter Frequency Stability . 23
5.2.3.1 Test conditions . 23
5.2.3.2 Test method . 23
5.2.4 Transmitter Occupied Bandwidth .
...

HARMONISED EUROPEAN STANDARD
Wireless Digital Video Links operating
in the 1,3 GHz to 50 GHz frequency band;
Harmonised Standard for access to radio spectrum

2 ETSI EN 302 064 V2.2.1 (2024-10)

Reference
REN/ERM-TG17-160
Keywords
digital, harmonised standard, radio, regulation,
video
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 302 064 V2.2.1 (2024-10)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements for transmitters . 11
4.2.1 Transmitter emission classification . 11
4.2.2 Transmitter test signal configurations . 12
4.2.3 Transmitter power accuracy . 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter frequency stability . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Transmitter occupied bandwidth . 13
4.2.5.1 Definitions . 13
4.2.5.2 Limits . 13
4.2.5.3 Conformance . 13
4.2.6 Transmitter channel occupancy . 13
4.2.6.1 Definitions . 13
4.2.6.2 Limits . 13
4.2.6.3 Conformance . 14
4.2.7 Transmitter unwanted emissions in the spurious domain . 14
4.2.7.1 Definition . 14
4.2.7.2 Limits . 14
4.2.7.3 Conformance . 14
4.2.8 Transmitter unwanted emissions in the out of band domain . 15
4.2.8.1 Definition . 15
4.2.8.2 Limits . 15
4.2.8.3 Conformance . 15
4.3 Conformance requirements for receivers . 15
4.3.1 Receiver test signal configurations . 15
4.3.2 Minimum performance criterion . 15
4.3.3 Receiver sensitivity . 16
4.3.3.1 Definition . 16
4.3.3.2 Limits . 16
4.3.3.3 Conformance . 19
4.3.4 Receiver adjacent channel selectivity . 19
4.3.4.1 Definition . 19
4.3.4.2 Limit . 20
4.3.4.3 Conformance . 20
4.3.5 Receiver blocking . 20
4.3.5.1 Definition . 20
ETSI
4 ETSI EN 302 064 V2.2.1 (2024-10)
4.3.5.2 Limit . 20
4.3.5.3 Conformance . 21
4.3.6 Receiver spurious emissions . 21
4.3.6.1 Definition . 21
4.3.6.2 Limits . 21
4.3.6.3 Conformance . 21
5 Testing for compliance with technical requirements . 22
5.1 Environmental conditions for testing . 22
5.2 Method of measurement for transmitters . 22
5.2.1 Generic measurement setup for transmitters . 22
5.2.2 Transmitter power accuracy . 22
5.2.2.1 Test conditions . 22
5.2.2.2 Test method . 22
5.2.3 Transmitter Frequency Stability . 23
5.2.3.1 Test conditions . 23
5.2.3.2 Test method . 23
5.2.4 Transmitter Occupied Bandwidth . 23
5.2.4.1 Test conditions . 23
5.2.4.2 Test method .
...

SLOVENSKI STANDARD
01-december-2024
Brezžične digitalne video povezave, ki delujejo v frekvenčnem pasu od 1,3 GHz do
50 GHz - Harmonizirani standard za dostop do radijskega spektra
Wireless Digital Video Links operating in the 1,3 GHz to 50 GHz frequency band -
Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 064 V2.2.1 (2024-10)
ICS:
33.160.40 Video sistemi Video systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONISED EUROPEAN STANDARD
Wireless Digital Video Links operating
in the 1,3 GHz to 50 GHz frequency band;
Harmonised Standard for access to radio spectrum

2 ETSI EN 302 064 V2.2.1 (2024-10)

Reference
REN/ERM-TG17-160
Keywords
digital, harmonised standard, radio, regulation,
video
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI EN 302 064 V2.2.1 (2024-10)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental profile . 11
4.2 Conformance requirements for transmitters . 11
4.2.1 Transmitter emission classification . 11
4.2.2 Transmitter test signal configurations . 12
4.2.3 Transmitter power accuracy . 12
4.2.3.1 Definition . 12
4.2.3.2 Limit . 12
4.2.3.3 Conformance . 12
4.2.4 Transmitter frequency stability . 12
4.2.4.1 Definition . 12
4.2.4.2 Limits . 12
4.2.4.3 Conformance . 13
4.2.5 Transmitter occupied bandwidth . 13
4.2.5.1 Definitions . 13
4.2.5.2 Limits . 13
4.2.5.3 Conformance . 13
4.2.6 Transmitter channel occupancy . 13
4.2.6.1 Definitions . 13
4.2.6.2 Limits . 13
4.2.6.3 Conformance . 14
4.2.7 Transmitter unwanted emissions in the spurious domain . 14
4.2.7.1 Definition . 14
4.2.7.2 Limits . 14
4.2.7.3 Conformance . 14
4.2.8 Transmitter unwanted emissions in the out of band domain . 15
4.2.8.1 Definition . 15
4.2.8.2 Limits . 15
4.2.8.3 Conformance . 15
4.3 Conformance requirements for receivers . 15
4.3.1 Receiver test signal configurations . 15
4.3.2 Minimum performance criterion . 15
4.3.3 Receiver sensitivity . 16
4.3.3.1 Definition . 16
4.3.3.2 Limits . 16
4.3.3.3 Conformance . 19
4.3.4 Receiver adjacent channel selectivity . 19
4.3.4.1 Definition . 19
4.3.4.2 Limit . 20
4.3.4.3 Conformance . 20
4.3.5 Receiver blocking . 20
4.3.5.1 Definition . 20
ETSI
4 ETSI EN 302 064 V2.2.1 (2024-10)
4.3.5.2 Limit . 20
4.3.5.3 Conformance . 21
4.3.6 Receiver spurious emissions . 21
4.3.6.1 Definition . 21
4.3.6.2 Limits . 21
4.3.6.3 Conformance . 21
5 Testing for compliance with technical requirements . 22
5.1 Environmental conditions for testing . 22
5.2 Method of measurement for transmitters . 22
5.2.1 Generic measurement setup for transmitters . 22
5.2.2 Transmitter power accuracy . 22
5.2.2.1 Test conditions . 22
5.2.2.2 Test method .
...