SIST-TS CEN/TS 13126-17:2005
(Main)Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 17: Fittings for tilt and slide systems
Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 17: Fittings for tilt and slide systems
This Part of prCEN/TS 13126 gives requirements and test methods for durability ,strength, security and function of fittings for tilt and slide systems for windows and door height windows.
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 17: Beschläge für Kippschiebe-Systeme
Dieser Teil von CEN/TS 13126 legt die Anforderungen und Prüfverfahren für die Dauerfunktionstüchtigkeit, Festigkeit, Schutzwirkung und Funktionsweise von Beschlägen für Kippschiebe-Systeme für Fenster und Fenstertüren fest.
Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Prescription et methodes d'essais - Partie 17: Ferrures pour depositifs oscillo-décalants-coulissants
La présente partie du prCEN/TS 13126 spécifie les exigences et méthodes d'essai relatives a l'endurance, a la résistance, a la sécurité des biens et au fonctionnement des ferrures pour dispositifs oscillo-décalants-coulissants utilisées sur les fenetres et portes-fenetres.
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in preskusne metode – 17. del: Okovje za nagibne in drsne sisteme
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 13126-17:2005
01-januar-2005
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in
preskusne metode – 17. del: Okovje za nagibne in drsne sisteme
Building hardware, fittings for windows and door height windows - Requirements and test
methods - Part 17: Fittings for tilt and slide systems
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 17: Beschläge für Kippschiebe-Systeme
Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Prescription et
methodes d'essais - Partie 17: Ferrures pour depositifs oscillo-décalants-coulissants
Ta slovenski standard je istoveten z: CEN/TS 13126-17:2004
ICS:
91.190
SIST-TS CEN/TS 13126-17:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
TECHNICAL SPECIFICATION
CEN/TS 13126-17
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2004
ICS 91.190
English version
Building hardware, fittings for windows and door height windows
- Requirements and test methods - Part 17: Fittings for tilt and
slide systems
Quincaillerie pour le bâtiment, ferrures de fenêtres et Baubeschläge, Beschläge für Fenster und Fenstertüren -
portes-fenêtres - Prescription et méthodes d'essais - Partie Anforderungen und Prüfverfahren - Teil 17: Beschläge für
17: Ferrures pour dispositifs oscillo-décalants-coulissants Kippschiebe-Systeme
This Technical Specification (CEN/TS) was approved by CEN on 18 August 2003 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13126-17:2004: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
CEN/TS 13126-17:2004 (E)
Contents
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions.4
4 Classification.4
5 Requirements .5
6 Test apparatus.6
7 Test methods.6
(informative)
Annex A Apparatus.9
Annex B (normative) Flow chart of test procedure.12
2
---------------------- Page: 3 ----------------------
CEN/TS 13126-17:2004 (E)
Foreword
This document (CEN/TS 13126-17:2004) has been prepared by Technical Committee CEN/TC 33
“Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by
AFNOR.
A full contribution to the preparation of this Technical Specification has been made by the European
manufacturers organisation ‘ARGE’ and National Standards institutions.
This Technical Specification is one of a series of Technical Specifications dedicated to building
hardware products. It is divided into seventeen parts to incorporate all types of windows and door
height windows.
Informative annex A of CEN/TS 13126-1 gives detailed schedules of the elements of components of
the seventeen parts of this Technical Specification.
Normative annex B of CEN/TS 13126-1 gives schedules of the elements of components used on the
21 types of window opening functions.
Normative and informative annex to all parts of this Technical Specification are indicated in the
content of the seventeen parts.
The performance tests incorporated in this standard are considered to be reproducible and as such
will provide a consistent and objective assessment of the performance of these products throughout
CEN Member States.
Annex A is informative while annex B is normative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3
---------------------- Page: 4 ----------------------
CEN/TS 13126-17:2004 (E)
1 Scope
This Part of CEN/TS 13126 gives requirements and test methods for durability, strength, security and
function of fittings for tilt and slide systems for windows and door height windows.
2 Normative references
This Technical Specification incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text, and the
publications are listed hereafter. For dated references, subsequent amendments to, or revisions of,
any of these publications apply to this standard only when incorporated in it by amendment or
revision. For undated references, the latest edition of the publication referred to applies (including
amendments).
EN 1670, Building hardware – Corrosion resistance – Requirements and test methods.
EN 12519:2004, Windows and pedestrian doors - Terminology
CEN/TS 13126-1:2004, Building hardware – Fittings for windows and door height windows –
Requirements and test methods – Part 1: Requirements common to all types of fittings
CEN/TS 13126-15, Building hardware - Fittings for windows and door height windows – Requirements
and test-methods - Part: 15: Rollers.
3 Terms and definitions
For the purposes of this Technical Specification, the terms and definitions given in EN 12519:2004 for
windows and doors apply.
4 Classification
4.1 General
The classific
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.