kSIST FprEN 4315:2025
(Main)Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4980) - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa
Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4980) - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa
This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980)
Consumable electrode remelted
Solution treated and precipitation treated
Bars and sections
a or D ≤ 100 mm
Rm ≥ 900 MPa
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.
Luft- und Raumfahrt - Hochwarmfeste Legierung X4NiCrTiMoV26-15 (1.4980) - Lösungsgeglüht und ausscheidungsgehärtet - Stangen und Profile - a oder D ≤ 100 mm - Rm ≥ 900 MPa
No Scope available
Série aérospatiale - Alliage résistant à chaud X4NiCrTiMoV26-15 (1.4980) - Mis en solution et précipité - Barres et profilés - a ou D ≤ 100 mm - Rm ≥ 900 MPa
Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud X6NiCrTiMoV26-15 (1.4980)
Refondu à l'électrode consommable
Mis en solution et précipité
Barres et profilés
a ou D ≤ 100 mm
Rm ≥ 900 MPa
pour les applications aérospatiales.
W.nr : 1.4980.
Désignation ASD-STAN : FE-PA2601.
Aeronavtika - Toplotno odporna zlitina X4NiCrTiMoV26-15 (1.4980) - Topilno žarjena in izločevalno utrjena - Palice in profili - a ali D ≤ 100 mm - Rm ≥ 900 MPa
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4315:2024
01-julij-2024
Nadomešča:
SIST EN 4315:2007
Aeronavtika - Toplotno odporna zlitina X4NiCrTiMoV26-15 (1.4980) - Topilno
žarjena in izločevalno utrjena - Palice in profili - a ali D ≤ 100 mm - Rm ≥ 900 MPa
Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4980) - Solution treated
and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung X4NiCrTiMoV26-15 (1.4980) -
Lösungsgeglüht und ausscheidungsgehärtet - Stangen und Profile - a oder D ≤ 100 mm -
Rm ≥ 900 MPa
Série aérospatiale - Alliage résistant à chaud X4NiCrTiMoV26-15 (1.4980) - Mis en
solution et précipité - Barres et profilés - a ou D ≤ 100 mm - Rm ≥ 900 MPa
Ta slovenski standard je istoveten z: prEN 4315
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
oSIST prEN 4315:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 4315:2024
oSIST prEN 4315:2024
DRAFT
EUROPEAN STANDARD
prEN 4315
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2024
ICS 49.025.05 Will supersede EN 4315:2007
English Version
Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15
(1.4980) - Solution treated and precipitation treated - Bars
and sections - a or D ≤ 100 mm - R ≥ 900 MPa
m
Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X4NiCrTiMoV26-15 (1.4980) - Mis en solution et X4NiCrTiMoV26-15 (1.4980) - Lösungsgeglüht und
précipité - Barres et profilés - a ou D ≤ 100 mm - R ≥ ausscheidungsgehärtet - Stangen und Profile - a oder D
m
900 MPa ≤ 100 mm - Rm ≥ 900 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4315:2024 E
worldwide for CEN national Members.
oSIST prEN 4315:2024
prEN 4315:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
oSIST prEN 4315:2024
prEN 4315:2024 (E)
European foreword
This document (prEN 4315:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.