Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 012: Jam-nut for jam-nut receptacles - Product standard

This standard specifies the characteristics of jam-nuts for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to class defined in Table 2.
For receptacles using these jam-nuts, see EN 2997-004, EN 2997-006 and EN 4067-004, EN 4067-006 for class SE only.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 °C Spitze - Teil 012: Sechskantmutter für festen Steckverbinder, Einlochmontage - Produktnorm

Diese Norm legt die Eigenschaften von Sechskantmuttern für feste Steckverbinder mit Mutternbefestigung in
der Familie der elektrischen Rundsteckverbinder mit Schraubkupplung fest.
Sie gilt für die in Tabelle 2 festgelegten Klassen.
Siehe EN 2997-004, EN 2997-006 und EN 4067-004 bezüglich fester Steckverbinder, bei denen diese Sechskantmuttern
angewendet werden, EN 4067-006 gilt nur für Klasse SE.

Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation - 65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 012: Écrou pour embase à fixation par écrou - Norme de produit

Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom, odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175 °C, stalno 200 °C, najvišjo 260 °C - 012. del: Šestroba matica za pritrditev z eno luknjo - Standard za proizvod

General Information

Status
Published
Publication Date
17-Mar-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Mar-2009
Due Date
15-May-2009
Completion Date
18-Mar-2009

Relations

Buy Standard

Standard
EN 2997-012:2009
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 °C Spitze - Teil 012: Sechskantmutter für festen Steckverbinder, Einlochmontage - ProduktnormSérie aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation - 65 °C à
175 °C continu, 200 °C continu, 260 °C en pointe - Partie 012: Écrou pour embase à fixation par écrou - Norme de produitAerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 012: Jam-nut for jam-nut receptacles - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2997-012:2009SIST EN 2997-012:2009en01-maj-2009SIST EN 2997-012:2009SLOVENSKI
STANDARD



SIST EN 2997-012:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2997-012
February 2009 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 012: Jam-nut for jam-nut receptacles - Product standard
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation - 65 °C à
175 °C continu, 200 °C continu, 260 °C en pointe - Partie 012: Écrou pour embase à fixation par écrou - Norme de produit
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 °C Spitze - Teil 012: Sechskantmutter für festen Steckverbinder, Einlochmontage - Produktnorm This European Standard was approved by CEN on 4 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2997-012:2009: ESIST EN 2997-012:2009



EN 2997-012:2009 (E) 2 Contents Page 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Required characteristics .5 5 Designation .6 6 Marking .6 7 Technical specification .6
SIST EN 2997-012:2009



EN 2997-012:2009 (E) 3 Foreword This document (EN 2997-012:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is dra
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.