SIST EN ISO 8032:2000

Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997)

Migrated from Progress Sheet (TC Comment) (2000-07-10): TC Res.62e)/1996: ISO 8032 , when published, be circulated as a UAP ++ ISO 8032:1987 is in course of preparation (Meeting 1996-05-15). ++ CEN/TC 218 N182: FDIS expected 97-01 but not issued (TA/970424)

Gummi- und Kunststoffschlauchleitungen - Biegung kombiniert mit hydraulischer Impulsprüfung (Halb-Omega-Prüfung) (ISO 8032:1997)

Diese Internationale Norm legt ein Verfahren zur Biegung von Hydraulik-Schlauchleitungen während der Impulsprüfung fest, allgemein bekannt als "Halb-Omega".

Flexibles hydrauliques en caoutchouc et en plastique - Essai de flexion combiné avec des impulsions de pression (essai demi-oméga) (ISO 8032:1997)

IEC TR 62559-1:2019, qui est un Rapport technique, sert de base à un référentiel commun des cas d'utilisation permettant de collecter les cas d'utilisation au sein de l'IEC sur une plateforme collaborative commune. Le référentiel est également utilisé pour organiser et harmoniser des cas d'utilisation afin de fournir des cas d'utilisation génériques largement acceptés comme base pour le travail de normalisation futur.
Le présent document donne un aperçu des parties individuelles de la série IEC 62559, pose les fondements/bases de l'approche des cas d'utilisation définie ici (les termes ou les types de cas d'utilisation, par exemple) et introduit des processus de collecte de cas d'utilisation collaborative au sein de l'IEC.
Les documents opérationnels comme les manuels d'utilisation des outils logiciels (le référentiel des cas d'utilisation, par exemple) ne sont pas décrits en détail. Ils seront disponibles en ligne et pourront être aussi mis à jour régulièrement.
Cette première édition, conjointement avec les autres parties de l'IEC TR 62559 selon la description dans l'Introduction, annule et remplace l'IEC PAS 62559 parue en 2008. Cette édition constitue une révision technique.

Cevni priključki gumenih in polimernih cevi - Upogibanje skupaj s hidravličnim sunkovnim preskušanjem (pol-omega preskušanje) (ISO 8032:1997)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2000
• Withdrawal Date: 26-Nov-2019
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Nov-2019
• Due Date: 20-Dec-2019
• Completion Date: 27-Nov-2019
• Directive: 89/106/EEC - Construction products
• Ref Project: EN ISO 8032:1999 - Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gummi- und Kunststoffschlauchleitungen - Biegung kombiniert mit hydraulischer Impulsprüfung (Halb-Omega-Prüfung) (ISO 8032:1997)Flexibles hydrauliques en caoutchouc et en plastique - Essai de flexion combiné avec des impulsions de pression (essai demi-oméga) (ISO 8032:1997)Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997)23.040.70Gumene cevi in armatureHoses and hose assembliesICS:Ta slovenski standard je istoveten z:EN ISO 8032:1999SIST EN ISO 8032:2000en01-december-2000SIST EN ISO 8032:2000SLOVENSKI
STANDARD



SIST EN ISO 8032:2000



SIST EN ISO 8032:2000



SIST EN ISO 8032:2000



SIST EN ISO 8032:2000



SIST EN ISO 8032:2000



INTERNATIONAL STANDARD IS0 8032 Second edition 1997-07-l 5 Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) Flexibles hydrauliques en caoutchouc et en plastique - Essai de flexion combink avec des impulsions de pression (essai demi-om6ga) Reference number IS0 8032: 1997(E) SIST EN ISO 8032:2000



IS0 8032: 1997(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 8032 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 1, Hoses (rubber and plastics). This second edition cancels and replaces the first edition (IS0 8032:1987), which has been technically revised. 0 IS0 1997 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 l CH-1211 Geneve 20 l Switzerland Internet central @iso.ch x.400 c=ch; a=400net; p=iso; o=isocs; s=central Printed in Switzerland ii SIST EN ISO 8032:2000



IS0 8032: 1997(E) Introduction Hydraulic hose assemblies are frequently flexed in service, especially when used on mobile equipment. This test is designed to accelerate the same type of failure of the test pieces as that which may occur in service. This International Standard is an alternative method to IS0 6802, which also specifies a method of flexing during impulse testing. IS0 8032 provides a method including more severe bending and higher impulse pressures to accelerate failure results. NOTE - It shall be clearly understood that this test method uses pressure and bend radius conditions considerably more severe than those specified in the hose product specifications and does not imply that the assemblies may be used in service under these conditions. SIST EN ISO 8032:2000



This page intentionally left blank SIST EN ISO 8032:2000



INTERNATIONAL STANDARD @ IS0 IS0 8032:1997(E) Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) WARNING - Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. 1 Scope This International Standard specifies a method of flexing, in an arrangement known as a ‘half- omega”, hydraulic hose assemblies dur
...