SIST EN 818-2:1999/oprA1:2006

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

This part of EN 818 specifies the requirements related to safety for short link lifting chains, Grade 8, of medium tolerance for use in chain slings and for general lifting purposes. They are electrically welded round steel short link chains, heat treated and tested and complying with the general conditions of acceptance of EN 818-1.   The range of nominal sizes of chain covered by this part of EN 818 is from 4 mm to 45 mm.  The bases for calculation of tabulated values for dimensions, working load limits and mechanical properties are given in Annex A.  Annex B gives information on weight/metre of chain.  Annex C gives an example of a designation system for chains.

Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 2: Mittelorientierte Rundstahlketten für Anschlagketten - Güteklasse 8

Chaîne de levage a maillons courts - Sécurité - Partie 2 : Chaîne de tolérance moyenne pour élingues en chaînes - Classe 8

Kratkočlene okrogle verige za dvigovalne namene – Varnost – 2. del: Verige za obesne verige srednje tolerance – Kakovostni razred 8

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Sep-2006
• ICS: 53.020.30 - Accessories for lifting equipment
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 17-Aug-2010
• Due Date: 22-Aug-2010
• Completion Date: 19-Aug-2010
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: EN 818-2:1996/prA1 - Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

Relations

• Consolidated By: SIST EN 818-2:1999+A1:2008 - Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 818-2:1999+A1:2008 - Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 818-2:1999+A1:2008 - Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
• Effective Date: 01-Jul-2008
• Revised: SIST EN 818-2:1999 - Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI SIST EN 818-
2:1999/oprA1:2006

PREDSTANDARD
september 2006
Kratkočlene okrogle verige za dvigovalne namene – Varnost – 2. del: Verige
za obesne verige srednje tolerance – Kakovostni razred 8
Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for
chain slings – Grade 8
ICS 53.020.30 Referenčna številka
SIST EN 818-2:1999/oprA1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN 818-2:1996
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2006
ICS

English Version
Short link chain for lifting purposes - Safety - Part 2: Medium
tolerance chain for chain slings - Grade 8
Chaîne de levage à maillons courts - Sécurité - Partie 2 :
Chaîne de tolérance moyenne pour élingues en chaînes -
Classe 8
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 168.
This draft amendment A1, if approved, will modify the European Standard EN 818-2:1996. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 818-2:1996/prA1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 818-2:1996/prA1:2006 (E)
Contents Page
Foreword           3
3 Definitions           4
4 Hazards           5
6 Verification of safety requirements        5
9 Instructions for use          5
Annex ZA (informative) Relationship of this European Standard with EU Directives
...