SIST EN 375:2000
(Main)In vitro diagnostic systems - Requirements for labelling in vitro diagnostic reagents for professional use
In vitro diagnostic systems - Requirements for labelling in vitro diagnostic reagents for professional use
This standard specifies requirements for the labelling of in-vitro diagnostic reagents for professional use.
In-vitro-Diagnostik/Diagnostika - Kennzeichnung und Produktinformationen von In-vitro-Diagnostika für den Gebrauch durch Fachpersonal
Diese Norm führt Anforderungen an die Kennzeichnung und Produktinformationen von In-vitro-Diagnostica für den Gebrauch durch Fachpersonal auf.
Systemes d'analyses médicales in vitro - Etiquetage des réactifs pour le diagnostic pour l'utilisation professionnelle
Cette norme précise les exigences applicables à l'étiquetage des réactifs pour le diagnostic in vitro à usage professionnel.
Diagnostični sistemi in vitro - Zahteve za označevanje diagnostičnih reagentov in vitro za profesionalno uporabo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.In-vitro-Diagnostik/Diagnostika - Kennzeichnung und Produktinformationen von In-vitro-Diagnostika für den Gebrauch durch FachpersonalSystemes d'analyses médicales in vitro - Etiquetage des réactifs pour le diagnostic pour l'utilisation professionnelleIn vitro diagnostic systems - Requirements for labelling in vitro diagnos
...
This May Also Interest You
This document establishes requirements for assuring quality, safety, performance and documentation of laboratory-developed tests (LDTs) as per their intended use for the diagnosis, prognosis, monitoring, prevention or treatment of medical conditions.
It outlines the general principles and assessment criteria by which an LDT shall be designed, developed, characterized, manufactured, validated (analytically and clinically) and monitored for internal use by medical laboratories.
The scope includes regulatory authority approved IVD medical devices that are used in a manner differing from approved labelling or instructions for use for that device (e.g. use of a sample type not included in the intended use, use of instruments or reagents not included in the labelling).
While this document follows a current best practice and state-of-the art approach, it does not provide specific details on how to achieve these requirements within specific disciplines of the medical laboratory nor specific technology platforms.
This document does not specify requirements for examination procedures developed by research or academic laboratories developing and using testing systems for non-IVD purposes. However, the concepts presented in this document can also be useful for these laboratories.
This document does not apply to the design, development and industrial production of commercially used IVD medical devices.
- Standard43 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment, preparation for CTC staining, and documentation of venous whole blood specimens intended for staining of CTCs during the pre-examination phase before an examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers, and manufacturers, biobanks, institutions, and commercial organizations performing biomedical research, and regulatory authorities.
This document does not cover pre-analytical workflow requirements for viable CTC cryopreservation and culturing.
Different dedicated measures are taken for stabilizing CTCs genomic DNA and RNA that are not described in this document; they are covered in ISO 7552-1 and ISO 7552-2.
NOTE 1 The requirements given in this document can also be applied to other circulating rare cells (e.g. foetal cells).
NOTE 2 International, national or regional regulations or requirements can also apply to specific topics covered in this document.
- Technical specification24 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment and isolation, DNA isolation and storage, and documentation of venous whole blood specimens intended for the examination of DNA isolated from circulating tumour cells (CTCs) during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions, and commercial organizations performing biomedical research, and regulatory authorities.
This document does not cover the isolation of genomic DNA directly from venous whole blood containing CTCs. This is covered in ISO 20186-2.
This document does not cover the isolation of specific white blood cells and subsequent isolation of genomic DNA therefrom or the pre-analytical workflow requirements for viable CTC cryopreservation and culturing.
NOTE 1 The requirements given in this document can also be applied to other circulating rare cells (e.g. foetal cells).
NOTE 2 International, national, or regional regulations or requirements can also apply to specific topics covered in this document.
- Technical specification27 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment and isolation, RNA isolation and storage, and documentation of venous whole blood specimens intended for the examination of RNA isolated from circulating tumour cells (CTCs) during the pre-examination phase before a molecular examination is performed.
This document is applicable to molecular in vitro diagnostic examinations including laboratory-developed tests performed by medical laboratories. It is also intended to be used by laboratory customers, in vitro diagnostics developers and manufacturers, biobanks, institutions, and commercial organizations performing biomedical research, and regulatory authorities.
This document does not cover the isolation of cellular RNA directly from venous whole blood containing CTCs. This is covered in ISO 20186-1.
This document does not cover the isolation of specific white blood cells and subsequent isolation of cellular RNA therefrom. This document does not cover pre-analytical workflow requirements for viable CTC cryopreservation and culturing.
NOTE 1 The requirements given in this document can also be applied to other circulating rare cells (e.g. foetal cells).
NOTE 2 International, national or regional regulations or requirements can also apply to specific topics covered in this document.
- Technical specification27 pagesEnglish languagesale 10% offe-Library read for×1 day
This document defines concepts, establishes general principles, and specifies essential requirements for information supplied by the manufacturer of IVD medical devices.
This document does not address language requirements since that is the domain of national laws and regulations.
This document does not apply to:
a) IVD medical devices for performance evaluation (e.g. for investigational use only);
b) shipping documents;
c) material safety data sheets / Safety Data Sheets;
d) marketing information (consistent with applicable legal requirements).
.
- Standard65 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) reagents, calibrators and controls intended for professional use.
This document can also be applicable to accessories.
This document is applicable to the labels for outer and immediate containers and to the instructions for use.
This document does not apply to:
a) IVD instruments or equipment;
b) IVD reagents for self-testing.
- Standard24 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) reagents, calibrators, and controls intended for self-testing.
This document can also be applicable to accessories.
This document is applicable to the labels for outer and immediate containers and to the instructions for use.
This document does not apply to:
a) IVD instruments or equipment;
b) IVD reagents for professional use.
- Standard24 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) instruments intended for self-testing.
This document is also applicable to apparatus and equipment intended to be used with IVD instruments for self-testing.
This document can also be applicable to accessories.
This document does not apply to:
a) instructions for instrument servicing or repair;
b) IVD reagents, including calibrators and control materials for use in control of the reagent;
c) IVD instruments for professional use.
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) instruments intended for professional use.
This document also applies to apparatus and equipment intended to be used with IVD instruments for professional use.
This document can also be applicable to accessories.
This document does not apply to:
a) instructions for instrument servicing or repair;
b) IVD reagents, including calibrators and control materials for use in control of the reagent;
c) IVD instruments for self-testing.
- Standard22 pagesEnglish languagesale 10% offe-Library read for×1 day
This document defines good study practice for the planning, design, conduct, recording and reporting of clinical performance studies carried out to assess the clinical performance and safety of in vitro diagnostic (IVD) medical devices for regulatory purposes.
NOTE 1 The purpose of these studies is to assess the ability of an IVD medical device in the hands of the intended user, to yield results pertaining to a particular medical condition or physiological/pathological state, in the intended population.
The document is not intended to describe whether the technical specifications of the IVD medical device in question are adequately addressed by the clinical performance study.
This document identifies the principles that underpin clinical performance studies and specifies general requirements intended to
— ensure the conduct of the clinical performance study will lead to reliable and robust study results,
— define the responsibilities of the sponsor and principal investigator,
— assist sponsors, clinical research organization, investigators, ethics committees, regulatory authorities and other bodies involved in the conformity assessment of IVD medical devices, and
— protect the rights, safety, dignity and well-being of the subjects providing specimens for use in clinical performance studies.
Analytical performance studies are out of the scope of this document.
NOTE 2 When the collection of specimens specifically for the analytical performance study creates an additional collection risk for subjects, some of the elements of this document (particularly the annexes) can be useful for ensuring subject safety.
Clinical performance studies that are performed for reasons other than pre- and post-market regulatory purposes, such as for re-imbursement purposes, are out of the scope of this document.
NOTE 3 Some of the elements of this document can be useful for the design of such studies, including subject safety and data integrity.
This document does not include safety information for laboratory workers or other personnel collecting the study specimens.
NOTE 4 Such information is included in other publications[1][12][13].
NOTE 5 Users of this document can consider whether other standards and/or requirements also apply to the IVD medical device which is the subject of the clinical performance study, for instance, in the situation for which there is an IVD medical device and a medical device used in an integrated system (e.g. a lancet, an IVD test strip, and a glucose meter), aspects of both this document and ISO 14155 can be considered.
- Standard72 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.