SIST EN ISO 15973:2002

Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): WIs 189-200 are the result of the splitting of WI 165 (TC res 104/1997)

Geschlossene Blindniete mit Sollbruchdorn und Flachkopf -AlA/ St (ISO 15973:2000)

Diese Internationale Norm legt Maße und mechanische Eigenschaften sowie Anwendungsdaten für geschlossene Blindniete mit Sollbruchdorn und Flachkopf, mit einer Niethülse aus Aluminiumlegierung und einem Nietdorn aus Stahl und mit Nenndurchmessern von 3,2 mm bis 6,4 mm fest.

Rivets aveugles a rupture de tige a corps fermé, a tete bombée -AlA/ St (ISO 15973:2000)

La présente Norme internationale spécifie les caractéristiques dimensionnelles et mécaniques ainsi que les données d'application pour les rivets aveugles à rupture de tige à corps fermé, à tête bombée, avec un corps en alliage d'aluminium (AIA) et une tige en acier (St), de diamètres nominaux compris entre 3,2 mm et 6,4 mm inclus.

Slepe polne kovice z zarezanim zakovnim trnom in zaobljeno valjasto glavo (ISO 15973:2000)

General Information

• Status: Published
• Publication Date: 30-Jun-2002
• ICS: 21.060.40 - Rivets
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2002
• Due Date: 01-Jul-2002
• Completion Date: 01-Jul-2002
• Ref Project: EN ISO 15973:2000 - Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15973:2002
01-julij-2002
Slepe polne kovice z zarezanim zakovnim trnom in zaobljeno valjasto glavo (ISO
15973:2000)
Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO
15973:2000)
Geschlossene Blindniete mit Sollbruchdorn und Flachkopf -AlA/ St (ISO 15973:2000)
Rivets aveugles a rupture de tige a corps fermé, a tete bombée -AlA/ St (ISO
15973:2000)
Ta slovenski standard je istoveten z: EN ISO 15973:2000
ICS:
21.060.40 Kovice Rivets
SIST EN ISO 15973:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15973:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 15973:2002
EUROPEAN STANDARD
EN ISO 15973
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2000
ICS 21.060.40
English version
Closed end blind rivets with break pull mandrel and protruding
head - AlA/St (ISO 15973:2000)
Rivets aveugles à rupture de tige à corps fermé, à tête Geschlossene Blindniete mit Sollbruchdorn und Flachkopf -
bombée - AlA/St (ISO 15973:2000) AlA/St (ISO 15973:2000)
This European Standard was approved by CEN on 15 December 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2000 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15973:2000 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15973:2002
Page 2
EN ISO 15973:2000
Foreword
Corrected 2001-04-04
The text of the International Standard ISO 15973:2000 has been prepared by Technical
Committee ISO/TC 2 "Fasteners" in collaboration with Technical Committee CEN/TC 185
"Threaded and non-threaded mechanical fasteners and accessories", the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by June 2001, and conflicting national
standards shall be withdrawn at the latest by June 2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 15973:2000 was approved by CEN as a European
Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------

SIST EN ISO 15973:2002
Page 3
EN ISO 15973:2000
Annex ZA (normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3269 2000 Fasteners - Acceptance inspection EN ISO 3269 2000
ISO 14588 2000 Blind rivets - Terminology and EN ISO 14588 2000
definitions
ISO 14589 2000 Blind rivets - Mechanical testing EN ISO 14589 2000

---------------------- Page: 5 ----------------------

SIST EN ISO 15973:2002

---------------------- Page: 6 ----------------------

SIST EN ISO 15973:2002
INTERNATIONAL ISO
STANDARD 15973
First edition
2000-12-15
Closed end blind rivets with break pull
mandrel and protruding head — AIA/St
Rivets aveugles à rupture de tige à corps fermé, à tête bombée — AIA/St
Reference number
ISO 15973:2000(E)
©
ISO 2000

---------------------- Page: 7 ----------------------

SIST EN ISO 15973:2002
ISO 15973:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 15973:2002
ISO 15973:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be
...